Original subtitles

In this section, we are going to see how to create the example 17 drink file attached with this lecture.

As you can see here, this is the example 17 drawing that we are going to make, as I've already told

you, you have to find out the center of the drawing board, which all of the parts are referenced here.

You can see.

This top portion.

Is the center of the dream, because this bottom portion is referenced with respect to this top portion.

So first we are going to make this top portion.

Also, when we are going to make that operation, the center of that operation is this circle and this

circle after that, all the other circles and the boundaries referenced.

So when we make that operation, we will make this circle first, then this circle, and then we'll

think about the other portions.

We'll discuss this example in two videos.

In this video, we are going to make a fully constrained geometry of this operation.

And in the next video, we are going to make this bottom portion.

So let us start.

I mean, this gets it in the face of a new file.

Let us start by creating circle.

Double click on Circle, let me create a circle here and another circle here.

Prevent these dotted lines which are going to create or to constrain.

Now, let me select this center.

Press the control button for multiple selection cineplexes.

Coincidence?

He had also select this center and the horizontal axis coincidence, double click on Dimensioning.

From this axis to the center, this dimension is 150.

From this axis to the center, this dimension is 100.

And this diameter is 160.

This diameter is 60, that is of radius 30.

We are giving sometimes diameter sometimes.

It is always you should give as that ring, if radius is given in the ring, please give radius accordingly.

Don't go for calculating and giving the diameter because you should consider that designer's point of

view.

If a designer gives the amendment and he wants to change the radius to 32, then you should be able

to do it directly without any calculations.

Let us proceed.

First, we are going to generate the boundary, so for that and other two circles are required.

I will double click on Circle, create a circle here and create another circle here.

Will take the central point, and this is coincidence.

The Centrepoint, and this is coincidence.

Now, double click on Dimensioning.

From this point to this axis, double click, this is 50 again from this axis and this center will give

a dimension of 50.

This diameter is.

Haiti diameter of valuating and.

This diameter is of value 50.

Now, let's take a circle again and create a circle here.

So this circle and the circle tendency, the circle and the circle.

Tendency.

I'll move the circle a bit in the opposite direction.

The radius is 40.

Now, immediately, I'll take quick trim.

And this.

Is this the exit from the come on now, again, I'll take a circle.

You can see I'm reading a lot of concern with this tendency this is beneficial.

So I like this constant state, you can see a tendency Cancian has been created, I'll select the circle

and the circle.

Select tendency.

Dimentia.

This is of religious value.

Now humility and a quick trim and trim disposition also, I'll trim this portion.

Now, I have to draw attention between these two circle and this two circle for that, I'll take by

tangent line.

DoubleClick.

Tendency from here to here and that tangent from here to here.

Now, let us bring.

Only this portion.

Double click on Sakho.

Let us select a circle here.

This diamond is for.

Diameter, 40, four zero and.

Now, take a circle and let us create a circle here.

Select the center of the circle and the horizontal axis, let us go inside.

Now, the picture of this circle center is 100.

So what we do is will give the center the center distance.

You can see center to center.

I'm giving a value of 100.

Divided by two, which is 50.

Now, let us give the diameter 20, now we'll rotate this total eight number of objects we have to make.

So I'll take insert operation transformation rapid.

This object about this central point, taking the reference of this centrepoint.

You can see we are making.

And will make seven number of.

Copy's.

Including the original one.

It will be eight.

You can see here it is exactly 45 degrees.

Because we have got into the snap more, so it is snapping.

You can see here it's 45 degrees and click now to constrain and select the object, select this and

fix.

Select object constraining fix.

Similarly, we'll do the same thing for the other objects.

Now, let us focus on this circle.

Texaco.

Let us zoom in a bit and create a circle here.

Let us create Lexis Nexis from this center.

To this center.

And we will make it horizontal.

The dimension of this axis will be the.

Pit circle, the pit circle radiuses 15.

The circle's diameter is 10.

Now, let us rotate this circle.

Click on Rotate.

And select this circle.

We looked at this circle about this centrepoint.

Decking the residents of this centrepoint.

We want for a number of copies of the original object, so here will change to for.

You can see five objects, a total me.

The angle that we want is 72 degrees, so here we can type 72 and enter.

Now select the circle and fix it.

We have completed this area now.

This area here, we will create a long little hole, you go to insert profile, predefined profile,

cylindrical elongated hole, click on it.

We'll take this center.

And you can see this, the big circle.

Click here.

And here to create the spine now click to get the radius of the circle very easily.

We have created now will give the circle radius, this is a radius 30.

And this circle releases five.

Now we have to give the start, point and end point, you can see here this is not constrained.

So what we'll do is we can take axes or we can also take line DoubleClick online.

Will connect the line from here.

To the center again here.

To the center escape, select these two lines and convert to reference, you can see it has got a construction

element.

Again, we'll switch off this construction element.

Now, we'll take the dimensioning from here to here, this angle is 50 degrees.

From this line.

To the vertical.

This value is 50 divided by two, which is 25 degrees, and you can see the object is completely constrained.

Now we'll select the object and.

We will take me to.

We don't have an axis here mirroring axis, so we will create a melting axis, click on Axis, take

this center and draw a horizontal line.

Now, now let us select object.

Mirah, about this axis.

Now, select Sakho, select the center.

Draw a circle here, prevent these dotted lines, click when these documents do not appear.

Now, let does give the Democrat.

This is a value 30.

And he can see we have completed the fully consistent geometry of the top area.

Now let us save this file so that we can use in the next video.

Click on file servers, Dexter.

Give name example 17.

Click on to.

We have saved the file, we will see the rest of the drawing in the next video.