Original subtitles

In this video, we are going to see the predefine profile tool's.

I go to insert profile, predefined profile, we are going to see all these options.

Let us start by creating a rectangle.

Click on Rectangle.

For a rectangle, you require there to diagonal points, you can see directly a rectangle can reach

all those options under this menubar.

Available here, click here, you can see these are options.

But we are going to use this menubar.

Click on insert profile predefined profile rectangle.

You can see you can create a rectangle by selecting that two diagonal points.

Click on the control plus key on the keyboard to unlock.

Now we'll take profile.

Predefined profile oriented rectangle.

Click on it, let us click somewhere here and maybe I'll click somewhere here and you can see this is

the Oriental rectangle that is a rectangle at an angle.

If you want to create, you can created by using this option.

But it's the key to undo.

Profile the different profile parallelogram, click somewhere here and maybe somewhere here, and you

can see the third point will define the parallelogram.

I'll click somewhere here and we have to find a parallelogram directly by using the parallelogram tool.

But it's on the circuit to undo.

Insert profile, predefine profile along at term hole already we have seen, but we'll see it again,

press on it.

This is the spine and this will define the various.

You can see this is a longer term whole.

Go to insert profile, predefined profile, cylindrical, elongated hole, click on it.

This is the center of the spine and is the radius of the spine.

And you can see this is the start point and end point.

Now, the radius of the elongated hole.

You can see here.

Let us do it again, I lose the control key to undo.

Insert profile, predefine profile, cylindrical, elongated hole, click on it.

Let me take this is the center of the spine.

This the standpoint.

And this is the end point of the spine.

And the radius of the longer term hole, click on it.

You can see we can define this kind of a feature directly in Kathia by using this tool.

Next, we'll see.

Keyhole profile, click on it.

Click somewhere to create the first point of the spine and click.

Another point.

To take the spine length, this is the lower portion of the keyhole, click on it and the upper reaches

of the keyhole.

Click, you can see we have found that keyhole.

I'll use the key to undo.

Now, I'll take insert profile, three profile hexagon.

Click somewhere and you can directly for Maxygen.

You can see.

Click taking two points, you can develop a hexagon, the center point will be defined, and the second

point will define the midpoint of the site.

So this line will be the radius of that inner circle.

So by giving the rest of the inner circle, you can define that hexagon directly.

Go to insert profile, predefined profile center rectangle.

Click somewhere to get the center of the rectangle and.

You have to define that diagonal point.

Click and you can see we have General Recentre Rectangle, that is by using the center of the rectangle

and one of the 46.

But it's the control key to undo now will take two lines to see the next option.

These are the two lines.

We go to insert profile, predefine profile, center parallelogram, select this line and this line.

To create a parallelograms, which is parallel to both of these lines, I'll click somewhere here and

you can see a parallelogram has been generated, which is parallel to this two selected lines.

So we have seen this entire pre-defined profile options.