Original subtitles

In this video, we are going to create that example seven drawing file attached with this picture you

can see here, this is the example, seven trunkful.

We are going to make it.

Let us create a rectangle will profile the first point, I think, is the origin.

The horizontal and vertical line.

Another horizontal line.

You can see we can use this tracking line if you have a problem taking this tracking lines, you can

create a bit far away and you can connect it later on.

You can select this line and give horizontal and vertical constraint for this length vertical.

This will also do it doesn't matter.

Let me bring it to the center.

Now let's get the dimensions, click on the damage and constraints, not this lens length is 40 in drawings

where you have to trim a line, do not take the length of the line, instead take the length between

the lines.

That is from this line to this line.

This dimension you take, which is 40 so that the dimension won't be dependent on the line, if you

trim the line, nothing happens.

So this is the best method for giving the length of a line?

No, take the length again.

From here.

To hear.

This dimension is sixty six zero and.

We have generated a fully constrain the geometry of a rectangle, as you can see, my constraining method

is something like I'm creating something, constraining it, then I'm creating something, constraining

it.

So basically, I'm creating a frame first, constraining it so that the foundation is strong.

Now, on that, whatever you build will not be a problem like you can see here.

I have created a fully constrained rectangle.

Nihil created the circles.

Instead, I suppose I will create the entire figure, maybe the circles, this rectangle and everything,

and then I'll go for constraining, then it will be a headache with a maximum of the students go through

so they are not able to learn quickly.

But use this metal.

You can learn very fast and you can develop complex drawings very easily.

Now let me create the circles and click on the circle.

I click on Create a Circle.

Here, let me double click on the Circle Icon so that I can create four circles on the four corner points.

OK, now let us give the dimensions.

I'll take dimension click on National Constraint.

Click here.

Vicinities is 10.

Now click on this circle.

This Radiuses 15.

This circle.

And the so-called.

15.

Now, let us start trimming, click on the second to deactivated or president escape key on the keyboard

to deactivate the dimensional constraint command, not double click on this eraser icon for quick trimming

the click.

Let us trim the unnecessary portion, which is this portion.

This.

This.

You can see some constraint has been erased, let us check it out later.

Now we have deemed unnecessary portions.

Click on the complete exit from the QuikTrip.

Come on now, let us check what constraint is actually missing.

You can see here.

The center is free because we had taken that end point of view, the lines, that is the intersection

of both these lanes.

So instead of this metal, what we should have done is we should have coincided this central point with

this line and this line.

So this is what I'm talking about.

Wherever you are facing trimming of the lines or any entity, better to go for referencing it with the

whole line.

So for constraining.

Now, I'll take this point.

Select this line between them.

Coincidence?

Similarly, I take this point, this line between them.

Coincidence.

Now, let us take this point.

It is also facing the same problem.

I'll take this point, this line.

Coincidence?

Again, this point and this line will coincide.

He had also the same problem.

Yes, of course, click on the center and the line.

Coincidence?

Between this point and this line.

Coincidence?

You can see here.

As we had created this rectangle by selecting this origin as the first point, that point of which we

had created as a coincident that has been trimmed.

So this is also facing the same problem.

I'll take this line and this axis.

Coincidence?

This line and this axis.

Coincidence?

And you can see we have achieved a fully consistent geometry of example seven, and during creation

of it, we have seen what is the importance of quick trimming and how to repair the damage that has

been done by quick trimming.