Original subtitles

In this video, we are going to create an example for drying file attached with this lecture.

As you can see here, this is the example for drawing that we are going to create.

We are going to create this drawing symmetrical about the axis, as you can see, the left portion and

right portion are symmetrical here.

So let us start.

We will create a rough profile first.

Click on Profile.

Let us credit profile.

Maybe I'll start somewhere here, click here, but line and a line.

Another vertical line prevent the formation of these dotted lines.

Here, we can use it as coincidence.

You can see here.

When I click, it will create a console symbol with this line.

So both of these lines will be of equal length and the line that I'm about to make will be coincidence

with this line.

Making a horizontal line.

You can see this is also coincidence, so let me give it a coincidence symbol.

Click over here.

Now create a vertical line coincidence with this point.

Click here.

Along this line.

You can see prevent these lines.

Which are the tracking lengths to prevent unnecessary constraints.

You can see here.

I'm clicking on the only when this.

Trekking lines are not coming at this case, we require this because this line will be coincident with

this point.

And we have developed our rough sketch now let us constrain it, the very first question that I am going

to give is coincidence between this line used the control key for multiple selection.

And this is.

Click here, coincidence, click on OK, Now will get a similar constraints.

Click on this line, use the control key for multiple selection, click on this line, and this is.

Slip this and give symmetry.

Click on.

Similarly, it's like this line, this line, and this is.

Select this and give the symmetry click on OK again will take this line, this line, and this is.

Geometrical constraints given symmetry constrain.

This line and this line.

It's like this axis and give a symmetry, geometrical constraint, select this line and this line with

this axis.

And give us symmetric on screen, click on OK, now let us give the dimensions double click on damage

to constrain.

I'll give a dimension to this.

Don't click, don't enter now let me give this dimension double click 20, you can see the figures disfiguring.

So what I do is use the control plus jerky to undo and instead of this dimension and delete this, let

us give this internal dimension so that this won't difficult.

The damage done from here to here is one zero 10.

To this point.

This is five.

This land.

From here.

This is a overcounting dimension, so we need not give this.

Select this undelete.

Now, double click again on Damageplan Constraints.

This is dimensionless.

Then you can see I'm giving dimension to this line and automatically this line is getting the dimension

due to the symmetry constraint.

And I'll take this line, this length 25 into.

Select this line, double click this Lantis, then enter.

And from here to here.

This dimension is turned into.

Now, we will go from here to here.

20 until now, the sketch is completely constrained, except these lines, logistical, which dimension

is left out.

Al deselect this dimensional constraint and when I hold and move this line.

You can see.

The height is left out, so I'll take dimensional constrained from this line to this point.

DoubleClick, this is Tim.

And you can see we have opened a completely constrained geometry of example for file a test with this

lecture.