Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:01,199 --> 00:00:06,559
this is the dji
2
00:00:03,240 --> 00:00:07,759
om-4 for whatever reason when i first
3
00:00:06,559 --> 00:00:10,320
turned on it was
4
00:00:07,759 --> 00:00:12,160
not calibrated it was not perfectly
5
00:00:10,320 --> 00:00:14,320
level
6
00:00:12,160 --> 00:00:15,359
i thought i was losing my mind so i had
7
00:00:14,320 --> 00:00:19,118
to use the
8
00:00:15,359 --> 00:00:21,118
bubble bath to confirm whether it is
9
00:00:19,118 --> 00:00:22,559
level or not and sure enough it was off
10
00:00:21,118 --> 00:00:24,640
by one degree
11
00:00:22,559 --> 00:00:25,759
but right now it's perfectly balanced
12
00:00:24,640 --> 00:00:31,839
it's off
13
00:00:25,760 --> 00:00:34,558
on and off by about 0.1 degrees
14
00:00:31,839 --> 00:00:36,929
so how do you calibrate let's go back
15
00:00:34,558 --> 00:00:38,718
and open the app
16
00:00:36,929 --> 00:00:41,359
[Music]
17
00:00:38,719 --> 00:00:44,960
you'll need the dji memo if you haven't
18
00:00:41,359 --> 00:00:46,878
downloaded already
19
00:00:44,960 --> 00:00:49,280
mine's already connected so that's why
20
00:00:46,878 --> 00:00:52,000
it opens instantly
21
00:00:49,280 --> 00:00:52,719
go to the left hand side on the bottom
22
00:00:52,000 --> 00:00:55,280
there's a
23
00:00:52,719 --> 00:00:56,800
three buttons press there to open
24
00:00:55,280 --> 00:00:59,198
options
25
00:00:56,799 --> 00:00:59,919
go down a little bit further and then
26
00:00:59,198 --> 00:01:02,799
you'll see
27
00:00:59,920 --> 00:01:05,359
gimbal auto calibration click on
28
00:01:02,799 --> 00:01:05,358
calibrate
29
00:01:06,640 --> 00:01:10,400
and when you calibrate you have to put
30
00:01:09,040 --> 00:01:13,118
it on a perfectly
31
00:01:10,400 --> 00:01:13,600
flat surface don't put on your desk
32
00:01:13,118 --> 00:01:15,680
because
33
00:01:13,599 --> 00:01:17,599
the dust might not be level i know for
34
00:01:15,680 --> 00:01:20,960
sure that the floor i'm sitting on
35
00:01:17,599 --> 00:01:23,839
is perfectly level so that's why i
36
00:01:20,959 --> 00:01:24,239
calibrate on the floor don't forget to
37
00:01:23,840 --> 00:01:28,719
use
38
00:01:24,239 --> 00:01:32,399
your tripod thingy to
39
00:01:28,719 --> 00:01:32,400
make sure that it's staining on its own
40
00:01:37,438 --> 00:01:44,319
open it up let it stand by itself
41
00:01:42,078 --> 00:01:45,199
and whenever you ready to begin just
42
00:01:44,319 --> 00:01:49,679
click on
43
00:01:45,200 --> 00:01:52,960
start it will jerk around swing around
44
00:01:49,680 --> 00:01:52,960
move around on its own
45
00:01:53,359 --> 00:01:57,200
and the whole process takes about less
46
00:01:55,599 --> 00:01:59,919
than a minute
47
00:01:57,200 --> 00:02:02,719
but let's see how much it actually takes
48
00:01:59,920 --> 00:02:02,719
to calibrate
49
00:02:05,040 --> 00:02:11,439
and there you go it's all done click ok
50
00:02:09,199 --> 00:02:12,318
let's go back to my mobile app and see
51
00:02:11,439 --> 00:02:23,840
if it's
52
00:02:12,318 --> 00:02:23,839
calibrated or not
53
00:02:27,039 --> 00:02:33,919
and there we go it's still good
54
00:02:30,080 --> 00:02:35,920
point 0.1 going back and forth
55
00:02:33,919 --> 00:02:38,159
all right i hope this helps with your
56
00:02:35,919 --> 00:02:41,359
issues and we'll stay
57
00:02:38,159 --> 00:02:49,759
stay tuned if you have any questions
58
00:02:41,360 --> 00:02:49,760
let me know in the comments
3749
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.