All language subtitles for DJI OM 4 _ How to Use OM 4 (Englisch)

DJI OM 4 Tutorial Videos

In this video,

we will introduce how to set up DJI OM 4 for the first time,

and demonstrate how to use it

Open the package of the product,

and take out DJI OM 4 and its accessories

Before using, please download the DJI Mimo app

After installing the app,

you can choose the Magnetic Phone Clamp or Magnetic Ring Holder to mount your phone to the gimbal magnetically

Installing the Grip Tripod

Align the screw of the grip tripod with a quarter inch at the bottom of the gimbal

Then tighten the screw until both points are aligned

Then, unfold the tripod

Attaching the Phone to the Magnetic Phone Clamp

Place the magnetic phone clamp in the center of the phone

Make sure the DJI logo and camera are facing the same direction

Unfold the gimbal,

align the phone clamp with the magnetic point on the gimbal,

and attach it to OM 4

For small phones such as the iPhoneSE (with a thickness of <7.5 mm and a weight of <160 g),

an additional silicone pad must be added before use

Attaching the Phone with Magnetic Ring Holder

Please remove the phone case before installation

1. Clean the back of the phone with the wipes provided,

and then dry it

Attach the sticker to the center of the back of your phone.

Press the liner disc to squeeze out air bubbles

2. Place the alignment guide on the back of the phone.

Adjust the position of the alignment guide to locate the center of the phone

3. Attach the magnetic ring holder to the back of the phone

Make sure it is firmly attached

4. Remove the alignment guide

After attaching the ring holder,

you need to wait for 12 hours before mounting it onto OM 4

Similar to the phone clamp,

all you need to do is align the ring holder and attach it to DJI OM 4

Press and hold the M button to power on the gimbal

Enable Bluetooth on your phone,

launch the DJI Mimo app,

log in or register with your DJI account,

and tap to activate.

Go one step further and purchase or activate the DJI Care Refresh plan

for affordable replacements with Express and more exclusive benefits

After activation is complete,

tap the camera icon in the top left corner of the screen to enter camera view

Press the M button once to switch between photo and video;

Press the M button twice to switch between landscape and portrait mode

Push the zoom slider up or down to control camera zoom

Push the joystick up or down to control the pitch of the gimbal

Push the joystick left or right to control the pan of the gimbal

Press the trigger twice to recenter the gimbal

Press the trigger three times to switch between the front and back cameras

Press the shutter button once to start recording.

Press and hold the M button until you hear a beep;

the gimbal will enter standby mode.

Press the trigger once to exit

Press and hold the M button until you hear two beeps;

the gimbal will power off

When you are finishing using OM 4,

remove the phone and store the gimbal as demonstrated.

Thank you for watching!