All language subtitles for 85_EN.

tutorial 85 in assembly for cateal. In the previous tutorial we used the two types of constraints

the Consident and the Contact. We made these two constraints and you can see the main

constraint on the left side tree. You can see Constrants, the Consident and the Surface

Contact. Also you can see the symbols of these constraints and the parts here. In this

tutorial I am going to say if we want to need this block has a contact surface with this

cylinder but with an offset between them. I don't want that to be touching the cylinder.

So we can apply in this case the offset constraint as we see it here in the constraint toolbox.

So to apply this constraint we need first to delete the main constraint before. To delete

on a constraint you can go to the constraint tree here and find the constraints. What

click delete or click delete on the keyboard or you can hover over it here on the part. Click

on move manipulation and click on this. Okay and when you click on and now we have the

distance between these two surfaces. Let's activate the offset constraint. Respect the

surface and the surface and you can specify the distance can make 50. Okay update now we

have an offset of 50. If you want to edit that distance double click on the constraint name

and we can type then. Okay update so you have your offset constraint.