All language subtitles for 78_EN.

tutorial 78 Compass translation. The previous tutorial we learned how to move

un-reted your existed body with the tools translation tools found in

transformation feature translation rotation and symmetry. And here in this

tutorial we can use the compass to do the same job and it might be easier for

some to use. So now you have your compass here and you notice you have this

grid square in the middle. If you drag it you are able to put it on this

surface and you can notice this is probably to the surface or to the edge or on

this surface. Now let's put it in this surface and now we are able and you

notice how it becomes exchanged and now you are able to translate or move this

part according to the direction shown on the compass up down and you can even

put it your part. And since we didn't select any feature so the compass will move

this part or this feature and you are able to select the main body when you

are moving. So now let's select the part and you have this compass is

activated, the green lines now you are able to move this feature upward and

let's update. Now you notice you move that feature along and you can again

select the feature and you have your compass activated and you can move it to

the left update. And now let's move it upward since since the since the

cylinder is made on the top of that part or this rectangle so there is a

constraint so it will move with that.

Right so let's move it upward. Let's activate so you are able to move that cylinder as

well. Now you are done you can just again pull it down. And now let's use the

compass translation again but this time we're going to move the whole body at

the same time not only one feature so let's drag it on this surface and

select this feature and this feature and you can see that the compass is

activated with the green color now you are able to rotate that part.

You click update and also you can rotate in that direction update.