All language subtitles for 76_EN.

To do a 76-minsure item, the Minsure item is found here in the next tool in the Minsure box

major item.

And from its name, it's major only one item at the time.

The previous tool, Minsure 3, you have to choose two items, two Minsure between them, but

the Minsure item is directly measure the item you want.

And here you can see you are every just to make selection one selection and you can filter

what you want surface edge and distribute to un-gimitry and in customized you can specify

what you want to show.

You have length, point, description, area and whatever.

So for example, just uncheck everyone, just let's keep the area.

Okay, now let's pick this surface.

Now you get the plain area is to be 0.005 meter square.

Just again uncheck the area, let's see the volume, apply K, let's check and check the

pad here.

You get the volume, it is so small that give you just 0.005 meter square.

If you change the unit to millimeter, you can see the real volume.

And for example, if you choose the center of gravity, let's choose the entire body here.

It will give you the center of gravity with the volume.

And here you can see the coordinates in x, y, and the volume of the bar.

And it's quite interesting tool.

And let's go to the customized, for example, I just want to create the radius.

And let's uncheck the volume, and here you can get the radius of the cylinder.

And if you check anything else, you will not get any results, just theory, this is as

you may have filter.

So this is very powerful tool in Cateria.

I hope this tutorial is useful.