All language subtitles for 52_EN.

To turn number 52 thickness. Now we're going to take the thickness feature here in

the dress up feature after we talk about chill and we made this chill for this bar.

Now we're going to make a thickness to add some thickness to a surface or an edge.

So for example we have this chill with Knuston thicknesses. We can change one

thickness or one edge thickness. For example let's make a 3 mm on this face. Okay so

we are able to change the thickness of this wall outside the chill.

And the next two feature in the dress up we have the thread or tie. In case you

have a if you remember the whole tutorial so you can make also a whole instead of

thread or trap or making a hole and then thread it or trap it after. In case you

have only a cylinder but you can use the wall with all its feature here the

thread definition and you can define the thread here instead of using this. So

this thread tap in case you have only a cylinder from before without just a

pocket or an extrude cut and you want to define a thread for it. And for the

remove face we're going to use this tool in the practical example.