All language subtitles for 40_EN.

tutorial 40 multi-section solid. In the last tutorial we created these three

reference plans as we see them here and now we are going to use them to create

multi-skitches and combine them with the multi-solid or multi-section solid and

it's called the lofted boss in other CAD software as we see the icon here.

So now let's create a sketch on this reference plan. So let's create a

center point with tagging and let's create another rectangle on this surface.

So now we can combine them with the multi-section solid feature. So we have sketch

seven is already chosen so you can notice here is choosing the closing point

and the section for the second sketch we can choose this point. So as you

notice it choose closing point to be in this corner and now we can if you click

here you choose to the point number two preview so we can just remove

selections and simply choose for this you can choose sketch.

Council again multi-section sketch one sketch two preview and now we created a

multi-section loft. If you change the direction here so on the label that will

change didn't work so we are able to change the direction of the loft

control scene and now also we can make a multi-section from an existing part so now

let's activate the multi-section tool. Let's use this first sketch and second

sketch to be this surface preview so as you notice we created the loft between

these two edges and you can change the direction here.

Preview you can notice the change in the shape or so you can make a guiding

line for