All language subtitles for 32_EN.

This is tutorial number 32 and it will be about the shaft feature as we see it here.

And it's coded in other software's the revolve.

So let's start to make profile.

To make the revolve we need a profile and we need an axis.

So let's now do a line to be an axis.

Let's draw it in under the sketch.

And line.

And we can convert it into construction line.

Set.

So now we have this circle.

And we have construction line on sketch 2.

So let's select this profile, shaft and for the axis we can select sketch 2.

So let's edit the sketch and make it a normal line.

Fix it.

Now let's try the shaft.

For the profile we have the axis.

Let's select this.

And for the profile we have this sketch.

And let's click preview.

So now we have this revolve.

And here you can specify an angle to 170.

And to edit the shaft just simply double click on it.

If we want to make a tube we choose thin profile.

And here you can see a thickness of 1 millimeter.

If we want to make another thickness on the other direction we can write 5 millimeter.

So we will have 6 millimeter.

Press OK.

Now let's try another sketch.

Let's draw a rectangle.

And let's draw an axis.

And let's exit.

We have the axis and the rectangle on the same sketch.

And let's click on the revolve.

And to work.