All language subtitles for 17_EN.

Welcome to turn number 17. In this tutorial I will be about close complement and art.

So let's start with a new part. Mechanical design, part design or pinch.

And now let's go to the sketcher.

The close complement art are found in the insert, operation, pre-limitation, close complement

art. And they are the last two commands in the pre-limitations menu before going to

transformation. So now let's show you the idea behind these two commands. Let's start

with making two arcs as we knew from the previous tutorial. So now we have two arcs here.

So let's start with close and art. So if we choose the close arc from here, from right

or from the insert and choose this arc. So now we are able to close this arc. And let's

try the second one, complement art. Let's give you the second half of the arc or how you

can call it positive or negative side. And let's choose this arc. So now we have the complement

or that or the missing side of that arc. And if you want to close it again, close arc.

So now we have two closed arcs. So now in the next tutorial we are going to start talking

about the transformation menu. So see you in the next tutorial.