Original subtitles

tutorial 11 in ktf4 beginners in this tutorial we going to talk about the

spline the first tool for advanced sketching and it is quite require some

attention while using the spline tool so let's start a sketch choose any plane

and to go to the spline or insert profile and spline you have two

talc of a spline spline and connect or you can reach it here from this menu

spline so let's choose a spline and the three points so now it's kind of

tricky to just press escape it's kind of tricky to get your accurate shape of

the spline so there are two ways to get your required shape of the spline you

might be a designer and you are drawing your sketches and you have a

scan picture for your drawing and you are following that drawing or by the

spline or you are an engineer and have your dimensions and equations to reach

the required spline so now here we have a spline and as you see contains many

points as you are choosing them and each point can be moved freely even you can

assign some dimensions between the points first the spline for example you can add

400 also the spline you can choose a point and right click choose close

the spline so you are closing your spline and you can also make a dimension

between this spline and just let's delete this one

you can make a distance between two splines with 114 t

here you can close some line to be intersecting with the spline now let's try to

use the second type of spline the connect to use the connect just first make two

lines first line and second line and let's choose the connect now we're going to

create a spline connecting these two lines