Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:05,800
In this tutorial we are going to show you how to use the weld tool.
2
00:00:05,800 --> 00:00:12,240
To get the weld tool to go to the insert annotation sample weld.
3
00:00:12,240 --> 00:00:17,840
You can also choose it from the right hand side here this icon.
4
00:00:17,840 --> 00:00:27,000
The weld and the weld is to show the technician the amount of material or the type of welding.
5
00:00:27,000 --> 00:00:32,680
The angle of the weld and so on.
6
00:00:32,680 --> 00:00:38,080
So let's try to select two edges where we want to weld.
7
00:00:38,080 --> 00:00:41,560
We said we want to weld this edge with this edge.
8
00:00:41,560 --> 00:00:43,440
So let's select this edge.
9
00:00:43,440 --> 00:00:48,200
In this edge and here you have the type of weld.
10
00:00:48,200 --> 00:00:56,480
For example here you can choose how which type of weldment you needed.
11
00:00:56,480 --> 00:01:01,879
Straight or excess saw.
12
00:01:01,879 --> 00:01:09,440
So if you are a weldment technician you would be familiar with all these types.
13
00:01:09,440 --> 00:01:12,720
So let's select this one.
14
00:01:12,720 --> 00:01:21,960
And here you can choose the thickness.
15
00:01:21,960 --> 00:01:23,840
Press OK.
16
00:01:23,840 --> 00:01:29,520
So we have this 5mm thickness weldment.
17
00:01:29,520 --> 00:01:59,479
And here we said we have our weldment degree.
1497
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.