Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:07,000
This is tutorial number 107 and it's an intro to assemblies within Katia V5.
2
00:00:07,000 --> 00:00:12,000
So what we're going to do is I'm just going to give you a brief intro to the assemblies.
3
00:00:12,000 --> 00:00:18,000
To start off, to open a new assembly, what you have to do is click File, click New,
4
00:00:18,000 --> 00:00:21,000
and you have to select Product. Click OK.
5
00:00:21,000 --> 00:00:25,000
So as we know, products are the assemblies within Katia.
6
00:00:25,000 --> 00:00:28,000
Now we're going to go back to the guitar.
7
00:00:28,000 --> 00:00:38,000
And as you can see in the guitar, you have the assembly and then underneath it you have each of the individual components.
8
00:00:38,000 --> 00:00:50,000
So, so far in Katia, what we've done is we've gone over sketching, well, first setting it up, sketching, and then part creation.
9
00:00:50,000 --> 00:01:01,000
So, assemblies is the next step after we've configured our Katia, learned how to create the sketches and manipulate them how we want,
10
00:01:01,000 --> 00:01:04,000
how to create the parts and manipulate them how we want.
11
00:01:04,000 --> 00:01:07,000
Now we have to bring everything together to create an assembly.
12
00:01:07,000 --> 00:01:11,000
So this is what we're going to be doing in our next set of tutorials.
13
00:01:11,000 --> 00:01:14,000
We're going to be going over how to create assemblies.
14
00:01:14,000 --> 00:01:21,000
And what we're going to be doing is we're going to be creating these assemblies.
15
00:01:21,000 --> 00:01:28,000
So, we're going to be creating this guitar and we're going to assemble within Katia.
16
00:01:28,000 --> 00:01:55,000
And that concludes our tutorial on the intro to assemblies within Katia V5.
1880
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.