All language subtitles for 05_EN.

This is the tutorial number 5.

We already talked in the last tutorial about the utangle tools and line profile.

And now this time to talk about an important tool, the dimension,

which is required in all of your sketch.

So now let's choose the dimensions, add some dimensions to this profile.

You can do constraint defined in this dialog box.

Here you can see the constraint which are found.

And at the dimension, we can just choose.

The constraint tool.

Here as you can see, you can add dimensions.

You can change it to 180.

And again, to the constraint add diameter, or radius for this circle.

It's 50.

If you notice on the profile here, you can see the edge, which is a relation to this line,

means the line is horizontal.

So now let's continue adding more dimensions.

Let's add, let me show you this arc.

Let's make it 40.

Also we can add some angles.

Let's choose the constraint, or the activated.

Let's choose this line.

And this line, add some angle.

Double click on it.

And we already made a dimension for this arc.

Let's try to make another dimension here and see what's happened.

You notice the arc turned into purple.

That means there is no need for this dimension.

Or the profile is over defined.

So it's got an area, if you change the dimension, it's not applied to the profile.

Also we just delete this dimension, right click and delete.