Original subtitles

Hello to the tutorial number 3 and in this tutorial we are going to deal with the most used

workbench which are the sketch workbench or sketch workbench.

We knew how to start a new part.

Let's just start a part and here we have the part 1 and here is the 3.

So now let's go to the sketch workbench.

To start sketching from this icon sketch and choose the plane where you want to make your

sketch or hover over the sketches here and you can see them on the 3 as well.

So let's choose the XY plane and here we are in the sketch workbench.

So now I am going to start choosing the rectangle tool and if you hover or press on the

arrow under you can see this take here.

You have the rectangle and the oriented rectangle.

Then we are going to use the type of rectangles.

The point coordinates.

Let's draw our rectangle.

If you notice here the sketch tool you can see the second point with the height of this rectangle.

You can simply leave.

Press the lead after selecting.

Now let's choose the oriented rectangle.

You need 3.123.

Now you created the rectangle with 3 points.

So let's choose the again and here we have our rectangle.

Let's go to the third type.

The parallel logram.

Choose 3.123.

And here we have.

Now the center point rectangle is an important type.

You can choose the center point with the rectangle and third one.

Let's choose point.

Somewhere just press.

So this is quick tutorial about how to use the rectangles and to start the sketcher.

You use it from your sketch after editing.