Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00.05 --> 00:00:04.02
- So now let's talk about the Polyline tool.
2
00:00:04.02 --> 00:00:07.05
So the Polyline tool is in your documents
3
00:00:07.05 --> 00:00:10.08
in your toolbar and it's right here.
4
00:00:10.08 --> 00:00:12.08
So we have the pipeline tool.
5
00:00:12.08 --> 00:00:15.05
And if I double-click that I can open up
6
00:00:15.05 --> 00:00:16.07
some of the settings
7
00:00:16.07 --> 00:00:21.06
and I can make some adjustments that type of line.
8
00:00:21.06 --> 00:00:25.04
So you see right here, there is the option to
9
00:00:25.04 --> 00:00:29.08
have a continuous line or dash lines by segment.
10
00:00:29.08 --> 00:00:33.03
And so right now this is unavailable to us,
11
00:00:33.03 --> 00:00:35.09
but if we add like a dash line,
12
00:00:35.09 --> 00:00:37.09
this becomes available to us.
13
00:00:37.09 --> 00:00:39.09
And so let's look at the difference
14
00:00:39.09 --> 00:00:42.06
of these two options here.
15
00:00:42.06 --> 00:00:45.02
And let's quickly look at that.
16
00:00:45.02 --> 00:00:47.08
So with this,
17
00:00:47.08 --> 00:00:53.00
let's make a box with a Polyline tool
18
00:00:53.00 --> 00:00:58.01
and let's look at these edges a little bit more closely.
19
00:00:58.01 --> 00:01:00.04
So with this pipeline tool
20
00:01:00.04 --> 00:01:05.07
we now have an option to adjust where those corners are
21
00:01:05.07 --> 00:01:08.00
and how they look.
22
00:01:08.00 --> 00:01:10.06
So this one is showing that the corners
23
00:01:10.06 --> 00:01:15.09
are not evenly distributed necessarily
24
00:01:15.09 --> 00:01:19.02
on the edge or on the corner itself.
25
00:01:19.02 --> 00:01:23.09
But if we push this, then we get this clean
26
00:01:23.09 --> 00:01:29.01
consistent length on all four corners.
27
00:01:29.01 --> 00:01:33.07
So this works with basically any of the Polylines settings.
28
00:01:33.07 --> 00:01:35.03
I'm just going to observe the properties
29
00:01:35.03 --> 00:01:38.02
and show you another example really quickly.
30
00:01:38.02 --> 00:01:43.08
And so what we get do change
31
00:01:43.08 --> 00:01:46.02
the geometry type.
32
00:01:46.02 --> 00:01:49.05
So we're going to do a polygon all.
33
00:01:49.05 --> 00:01:53.05
So let me just click a few here.
34
00:01:53.05 --> 00:01:57.01
And so you can see those corners
35
00:01:57.01 --> 00:02:04.01
look pretty consistent
36
00:02:04.01 --> 00:02:07.08
and let's just change it and see what it looks like.
37
00:02:07.08 --> 00:02:11.09
So now it looks at the corners are hitting the edge
38
00:02:11.09 --> 00:02:16.00
and they're basically starting from that edge point
39
00:02:16.00 --> 00:02:21.00
instead of having kind of the body of that line
40
00:02:21.00 --> 00:02:23.07
at the edge.
41
00:02:23.07 --> 00:02:24.07
All right.
42
00:02:24.07 --> 00:02:26.07
So that's one feature.
43
00:02:26.07 --> 00:02:28.03
So, you know,
44
00:02:28.03 --> 00:02:29.01
the difference
45
00:02:29.01 --> 00:02:34.04
between a polygon line and a simple line
46
00:02:34.04 --> 00:02:37.00
is that the polygon is going to be altogether.
47
00:02:37.00 --> 00:02:38.09
Once you create it.
48
00:02:38.09 --> 00:02:45.06
And it is kind of one component versus a line tool
49
00:02:45.06 --> 00:02:51.04
which creates different components
50
00:02:51.04 --> 00:02:55.00
that are potentially grouped.
51
00:02:55.00 --> 00:02:59.01
And so these are grouped individual lines.
52
00:02:59.01 --> 00:03:03.02
And so you don't have the option to manipulate the kind
53
00:03:03.02 --> 00:03:05.04
of condition at the corners.
54
00:03:05.04 --> 00:03:07.00
So let's look at a few other settings.
55
00:03:07.00 --> 00:03:08.05
So I'm just going to go up here
56
00:03:08.05 --> 00:03:11.05
to the settings dialogue
57
00:03:11.05 --> 00:03:13.00
and open that up.
58
00:03:13.00 --> 00:03:15.02
And we have different types
59
00:03:15.02 --> 00:03:17.03
of line if it's the category of line.
60
00:03:17.03 --> 00:03:20.08
So we have this property area and we can adjust this.
61
00:03:20.08 --> 00:03:25.00
So if it's a cut line or a skin separator or just drafting
62
00:03:25.00 --> 00:03:27.09
we can also adjust the renovation status
63
00:03:27.09 --> 00:03:31.00
so existing to be demolished and new
64
00:03:31.00 --> 00:03:34.05
depending on what your renovation filters are.
65
00:03:34.05 --> 00:03:41.07
And then we can also adjust which filters it shows up on.
66
00:03:41.07 --> 00:03:45.01
And of course we can adjust the line type.
67
00:03:45.01 --> 00:03:49.01
We can adjust if it has a Arrowhead
68
00:03:49.01 --> 00:03:52.05
and what type of Arrowhead that might be
69
00:03:52.05 --> 00:03:59.02
and we can adjust the pin weight for the head itself.
70
00:03:59.02 --> 00:04:02.02
And of course, layers
71
00:04:02.02 --> 00:04:05.01
we can adjust these layers accordingly.
72
00:04:05.01 --> 00:04:09.07
So I'm actually really excited about this pipeline tool.
73
00:04:09.07 --> 00:04:11.03
And the reason is
74
00:04:11.03 --> 00:04:14.07
is it does give you a lot more capabilities
75
00:04:14.07 --> 00:04:19.09
in how your line work looks.
76
00:04:19.09 --> 00:04:23.00
And this is a pretty unique feature among kind
77
00:04:23.00 --> 00:04:25.07
of offering softwares to be able to control the line
78
00:04:25.07 --> 00:04:29.08
in that minute or granular kind of level.
79
00:04:29.08 --> 00:04:32.02
And so that's the Polyline tool.
80
00:04:32.02 --> 00:04:34.09
And if you need more information about it
81
00:04:34.09 --> 00:04:36.09
you can always go to your help
82
00:04:36.09 --> 00:04:39.06
and do a little bit more research,
83
00:04:39.06 --> 00:04:41.02
but pretty straightforward.
84
00:04:41.02 --> 00:04:43.03
And I think you'll enjoy kind
85
00:04:43.03 --> 00:04:46.03
of the new capabilities that it provides.
6559
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.