Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:06,150 --> 00:00:15,180
OK so on rather 3 this network and this network are not directly connected this network and this network
2
00:00:15,570 --> 00:00:17,180
are directly connected.
3
00:00:17,570 --> 00:00:30,660
So ip route Destination Network is 1 9 2 1 6 8 1.0 subnet mask is this or destination prefix mosque.
4
00:00:30,900 --> 00:00:34,740
Mosque used is 2 5 5 2 4 5 2 4 5 0.
5
00:00:34,740 --> 00:00:42,420
Next Top is 1 9 2 1 6 8 3 dot 1 from right a 3 point of view when sending traffic to this network.
6
00:00:42,480 --> 00:00:56,270
This is the next hop IP rock 1 9 2 1 6 8 2 dot Zero Mosque Next Top is 1 on 2 1 6 8 3 dot 1 so now show
7
00:00:56,270 --> 00:01:04,250
IP brought on brought a 3 we can see two static results have been added to the writing table and now
8
00:01:04,280 --> 00:01:15,440
when we do a trace from router 1 to the DNS server notice the trace succeeds this router camping the
9
00:01:15,440 --> 00:01:29,290
DNS server some P.S. 1 IP address of PCI is thus default gateway is right a one can we ping the DNS
10
00:01:29,290 --> 00:01:40,450
server 170 60 in 1 to 2 Yes we can if we trace 2 that we can see that the traffic goes to brought a
11
00:01:40,450 --> 00:01:54,310
1 router 2 rather 3 and then the DNS server if I open up a web browser can the P.C. connect to Cisco
12
00:01:54,310 --> 00:01:56,870
dot com yes it can.
13
00:01:57,070 --> 00:02:04,750
So we can connect to the packet trace of Cisco dot com server and we can do that using the DNS name
14
00:02:05,770 --> 00:02:16,280
in other words the name has been resolved by the DNS of a and we can ping Cisco dot com and we can trace
15
00:02:17,270 --> 00:02:29,010
to Cisco to come What about on P.C. to can P.C. to connect to Cisco dot com yes it can we can browse
16
00:02:29,010 --> 00:02:37,860
to the Cisco Web site and we can ping Cisco dot com so we've successfully configured static grants on
17
00:02:37,950 --> 00:02:43,680
these routers show IP round shows us the IP routing table.
18
00:02:43,930 --> 00:02:44,390
Right.
19
00:02:44,380 --> 00:02:53,960
One has two static rods configured both with the next top of a right to write a two as two static drafts
20
00:02:53,960 --> 00:03:04,340
configured one pointing two broad to three one pointing to write a one and rather 3 has two static rafts
21
00:03:04,340 --> 00:03:10,140
configured both pointing back to Roger too.
22
00:03:10,170 --> 00:03:18,360
In other words the next top for both of these static drafts is rather to write a three should as an
23
00:03:18,360 --> 00:03:26,520
example be able to ping write a one and draw a three should be able to ping the IP addresses of the
24
00:03:26,520 --> 00:03:28,960
pieces of which it can.
25
00:03:29,130 --> 00:03:37,710
So as an example on P.S. two we can see that piece he too has this IP address and Roger three is able
26
00:03:37,710 --> 00:03:47,170
to ping that IP address in this lab but we also told to make sure that switch one can ping the DNS server.
27
00:03:47,370 --> 00:03:51,500
In other words the switch in needs to be able to ping the DNS server
28
00:03:56,070 --> 00:03:59,210
the switches configured with this IP address
29
00:04:02,150 --> 00:04:13,340
1 9 2 1 6 8 1 2 5 3 show IP wrong shows us that the default gateway is not sent and the routing table
30
00:04:13,340 --> 00:04:17,570
has the statement ICMP redirect caches empty.
31
00:04:17,750 --> 00:04:25,010
That means that IP writing is not enabled on the broader which means that we need to configure a default
32
00:04:25,280 --> 00:04:31,490
gateway on the switch pointing to broader one.
33
00:04:31,490 --> 00:04:38,630
So we need to configure the switch with that a default gateway so should IP right now displays that
34
00:04:38,690 --> 00:04:42,770
the default gateway is rather one.
35
00:04:42,800 --> 00:04:50,860
So we should be able to paying the DNS server took it a while but it's not working and we should be
36
00:04:50,860 --> 00:05:05,080
able to ping Cisco to come if we can figure a name server so IP names of 1 7 2 16 1 or 2 IP domain look
37
00:05:05,080 --> 00:05:06,810
up.
38
00:05:07,810 --> 00:05:16,640
Let's see if we can ping Cisco dot com notice of the domain name has been translated and we have IP
39
00:05:16,640 --> 00:05:19,470
connectivity to Cisco dot com.
40
00:05:19,670 --> 00:05:28,160
So I've successfully completed the slab I've configured static rots on these three routers I'll save
41
00:05:28,280 --> 00:05:38,440
the configuration as a lost step one more thing I'll do is fix this switch name should be host to switch
42
00:05:38,440 --> 00:05:50,490
to and on VLAN 1 I'll set to the IP address to use DCP to show IP interface brief we can see now that
43
00:05:50,490 --> 00:05:58,390
to this host has this IP address in other words an IP address has been allocated by the DHB server in
44
00:05:58,390 --> 00:06:08,100
the right subnet it DHB server is configured on this server How did you do.
45
00:06:08,100 --> 00:06:10,680
Were you able to complete the lab.
46
00:06:10,890 --> 00:06:16,890
It's important that you know how to configure or verify and troubleshoot static grants for the CCMA
47
00:06:16,890 --> 00:06:17,430
exam.
5443
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.