Original subtitles

[Laughter]

hey what is going on everyone it's me Mr

Mario and I'm going to be showing you

all here if you have a PlayStation 3

console how you can install PS3 hin on

it now the nice thing is this works

right off the bat here with all models

of the PS3 meaning this will work on the

fat system The Slim system and even the

Super Slim system so none of these

console models are left behind

thankfully now what exactly is PS3 hin

PS3 h is well a PlayStation 3 Homebrew

enabler and it does just that it enables

your console to run Homebrew so Homebrew

means you'll be able to of course play

your backup games and have fun with that

but you'll also get access to other

pieces of Home RW such as monog guns

here which is a backup loader on here

for your games you got something like

Apollo save tool which allows you to

modify manipulate saves and do so much

more on the system right here we have

the PS2 Classics placeholder which

allows you to play encrypted PS2 games

from isos on your PS3 which will be

required if you are doing it like that

for PS3 H and it allows you to do so

much more now this doesn't give you the

full capability of your system like a

full custom firmware with a jailbreak W

however as I said the main benefit with

this is that unlike a custom firmware

that only works on fat models and some

of the slim models of the PS3 PS3 hin

will work on every single model of the

PS3 and while it does not allow you to

do everything a fully-fledged custom

firmware would allow you to do I'd say

it does pretty much most of what anybody

who wants a modified PlayStation 3 wants

to do with their system so PS3 hen will

work just fine for most people right out

the gate now in order to get started

here we're going to need a few things

first of all we're going to of course

need our PS3 up and running and working

you'll also need an original OEM Sony

PlayStation 3 controller as well as a

mini USB cable so we can boot up into

safe mode to do a couple of firmware

installs on top of that we're also going

to need a USB flash drive we're going to

need internet on our PS3 and on a

computer nearby because we're going to

need the computer to download a few

files transfer them over to the USB

flash drive and then run what we need to

on our PS3 with those prerequisites out

of the way let's go ahead and change a

few settings that we're going to need

here on the PS3 before we get started so

what you can do is come over here go

over to your settings and we're going to

go over to the system settings now once

you're inside of your system settings

one of the first things that you should

do is disable automatic update that way

your system in the future does not

automatically update the firmware and

you accidentally lose your PS3 H install

it is also recommended to change display

what's new to off and finally one thing

you can also check here to make sure

your PS3 is currently compatible is go

down to the system information section

to check the firmware now once you're

here check check the system software

version and make sure that the version

number is the same or a lower number

than what the title is of this video

because if this is the same number or

lower that means you'll be able to

follow along with this video and we'll

get you up to date if it is a higher

version unfortunately you're going to

have to wait until PS3 hin has been

updated for your firmware version and if

you're on a lower firmware version than

what the title of this video shows do

not worry about it because again we are

going to get upd ated to the point where

we need to be here I also want to take

some time out to talk about future

firmware updates because you might be

watching this video in the future where

there is a newer firmware than the

firmware that I am recording this video

on right now and that is because really

the install method is going to be the

same on here however if you want to be

safe you can always check the PS3

exploit site which will be linked Down

Below in the description and you can

come over here to recommended firmware

now as you can see we can look at PS3

hin and at the time of recording the

highest support firmware is

4.91 meaning that if you have a system

running firmware 4.91 or lower you can

run PS3 H successfully however in the

future there will be higher firmware

versions that are out and typically

these tools are updated pretty fast

thanks to the dedication of the team

here and another nice thing is the

install method itself for PS3 hin really

does not change so in the future with

newer firmware updates if the install

method is going to be the same here but

it's on a higher firmware I plan to

update the metadata and the title of

this video to show that higher firmware

supported version because again that

will mean that it is supported and the

process is going to be the same but that

is just to let you all know in case the

numbers you're seeing on your screen are

different than the ones in the video no

need to panic that just means the

process is going to be same on a newer

firmware now with all that out of the

way you should be ready to get started

here so at this point if you are all

good to go make sure you grab a USB

flash drive take it over to your

computer and get ready to download a few

files the first site you'll need to go

to is the official PS3 exploit site

which will be linked Down Below in the

description of this video again right

here you can see the firmware version

which is supported for PS3 H and you can

download the latest hfw from here which

will be the modified firmware we will

need in order to continue on with this

now I will have a separate link to the

hfw download and typically it is from a

release page similar to this or a form

post now it does change up a little bit

from time to time here but as you can

see you can find the link for this right

here which you can go ahead click this

and download it however you might run

into something like that if they are

just linking the direct pup file so if

you cannot get the page to load or a

download to start successfully you might

just have to rightclick this and click

on save link as and then save the file

somewhere you can easily find it but

keep this page on hand because we are

going to need the md5 hash for later in

case the firmware is in an archive file

such as a zip or a 7zip or a raw archive

then you might need something such as

szip if it is you can download whichever

version of the software works for your

operating system and then install it

it's easy it's free and it should get

the job done I did mention it md5 hash

and we are going to need to check it so

I am going to have an md5 hashing tool

linked Down Below in the description now

you could use your own application if

you want to but I'm using this online

one here which seems to work well enough

we will have to also format our USB

drive to make sure it works specifically

on the PS3 and an easy way of doing that

here is using rofus you can come to this

page scroll down here and download the

latest build of this typically I

download the portable version here just

because I don't need to install it

however if you choose to install it the

64-bit version is here or the 32bit or

x86 version is right here depending on

which setup of Windows you have the last

download you'll need here is some

Homebrew because well this is a Homebrew

enabler so typically the starter home

brew that I do recommend is going to be

multim man you can go to the link Down

Below in the description click on multim

man right here and for this there's

going to be a few versions but I

recommend getting the hin specific

version now some people get worried

because it says 4.84 and you do not have

to worry about the version number here

working on a lower firmware it's still

going to work on a higher firmware

thankfully but it would be recommended

to get the unofficial hin version

because this one is a bit more stable

for PS3 hin users again just download

this and save it somewhere you can

easily find it and with that all of our

downloads should be complete with our

downloads completed it should look

something like this you should have

Rufus you should have your hfw and

whatever home brew that you want if you

want to download and install more home

RW feel free to however this is going to

be at minimum what we're going to be

installing here so let's format the USB

drive first in order to do this plug

your USB drive into your computer and

double click on rofus when this pops up

say yes and if you want to allow it to

check for updates you can now Rufus

should look like this and as you can see

I have a 16 GB USB drive that I've

Plugged In which should work just fine

you're going to want to select your USB

drive right here and if for some reason

your drive is not showing you might need

to go to show Advanced Drive properties

and list USB hard drives however this is

working just fine here so for our USB

flash drive it is showing up we can

continue on for boot selection you're

going to select non- bootable and here's

the two options that are going to be

most important the first one is

partition scheme must be MBR if it is

GPT it will not work on your PS3 you

have to have it be MBR secondly the file

system must be fat 32 as long as it is

MBR and fat 32 it will work if you do

not have these two set up properly this

will not work for your PS3 you can set

the volume label to whatever you want to

but once you're ready to go we can go

ahead and format our drive now do keep

in mind right right here this is going

to erase all the data that we care about

on this drive so if there's any data

that is important to you go into your

drive back it up to your computer and

then format it just keep that in mind

you are going to be warned but once

you're ready to format we can close out

of any Windows like this click on start

as long as you understand the warning

you can click on okay and then wait a

few seconds for this to complete and

once this completed you can click on the

close button because we're done with

Rufus now you should be able to check

your USB drive if you right click it go

to the properties and look at file

system it should now show up as fat 32

and at this point we can now work on

getting all the files copied over so we

can go into our USB drive directly and

we're going to first make a new folder

we're going to right click create a new

folder and we're going to call it PS3

all uppercase all one word inside of the

PS3 folder we must make a new folder and

we're going to call this one all

uppercase all one word update now inside

of the update folder you need to grab

your hfw right click and copy this and

then paste it inside of the update

folder give it a few seconds to copy

over now to check the file name if

you're on Windows you'll have to go to

view and show file name extensions and

should be a pup file if it is not it

might be an archive depending on what is

uploaded if it is a zip or a 7z or a r

file so if it's one of those you might

have to just use 7zip to rightclick and

extract it out however we do not need to

do that if we have a pup file right here

but we do have to rename this file so we

are just going to click on this and

we're going to rename it so it should

look exactly like this ps3updat.pup

click here and it should be renamed

successfully so that is the structure

that we need again it must be a pup file

which is why it's important to make sure

you have your file name extensions

enabled the final step for our firmware

file is to double check and make sure

that it downloaded properly so we need

to check the md5 check sum on here for

this here we can use the online md5 file

check sum in which you can either drag

the file from your usb drive here or

click on drop file here for this you

must navigate specifically to your USB

drive go into the PS3 folder update

folder and grab the ps3updat.pup

file then give it a few seconds to Hash

once it's been completed it should give

you a hash value like this what you'll

need to do is find the hash value

associated with that firmware download

and check it right here now you are

going to have to use your eyes to check

this here and do keep in mind it is all

capital letters here while over on the

online tool the letters will be

lowercase but keep in mind this is not

case sensitive you just have to make

sure the letters and the numbers match

between here and between the official

download and once you have verified the

md5 hash is matching then you can

continue on thankfully the next copy is

going to to be much easier you're going

to need to get your Homebrew file and

it's going to be a PKG file with

whichever Homebrew you downloaded in my

example I'm going to be using multim man

for this all you need to do is

rightclick and copy multim man then go

to your USB drive and in the root of

your USB drive next to the PS3 folder

right click and paste and give it a few

seconds to copy once that's done it

should look exactly like this you should

have your PS3 folder and you should have

any packages that you want to install

outside the PS3 folder again Homebrew is

going to go here and your update should

be in ps3 update and it should be

renamed to ps3updat.pup

after it has been verified of course

once that's all done we can come back

out here right click inject our USB

drive and now take it to the PS3 most of

the work is now going to be there with

our USB drive set up properly make sure

it is plugged into the PS3 and you can

navigate over to the video tab or even

the music tab any of these others and

look for your USB device as long as it

is showing up here that means that you

have successfully set up your USB drive

now we need to work on updating our

firmware to hfw you have to do this on

any firmware even if you are on the same

firmware version and it is recommended

to do it twice so the first time here we

can try it through the xmb now what you

need to do is make sure your USB drive

is plugged in navigate over to settings

go all the way to the top to system

update and inside a system update go

down to update via storage media and

once it finds your hfw that means you

should be good to continue on tap okay

please wait a bit and it should load in

the terms of service now once you read

through the terms of service and you're

okay with everything here navigate over

hit accept go down to start tap X and

give it a few moments to copy over it's

now going to copy the update to your PS3

console and then reboot the system and

then update now once your system does a

soft reboot it should bring you to the

system update screen from here you can

press the PlayStation button on your

controller and it should begin

installing all you have to do here is

wait now if it does something where it

gets through the install and then all of

the sudden it jumps to 100% And reboots

that means that the firmware has been

installed successfully there's no need

to panic that is expected behavior and

secondly if you try to update through

the xmb and you get an error saying that

you're on the same version or it is not

able to install the update don't worry

the second method is going to be for you

which will be installing through safe

mode I'm going to cover that next now

here we go once your system reboots it's

going to look the exact same as before

and that is to be expected nothing is

going to appear differently on here

however if you've installed the firmware

successfully one time you're now going

to need to do it a second time this time

through safe mode this is where you're

going to need a PlayStation 3 controller

a mini USB cable plug the cable and

controller into the console and from

here you're going to need to turn off

the PS3 and then turn it on in a

specific way what you'll need to do is

physically go over to the PS3 and hold

down the power button on the console

it's going to power on but keep it held

down until the console turns

off once it turns off do the exact same

thing by holding down the power button

but this time around you're going to

wait until you hear two quick beeps as

soon as you hear two quick beeps let go

of the power

button if you see the screen you should

be in safe mode and just like it says

connect your controller using USB cable

then press the PS button once you're in

safe mode go down to the option for

system update and tap the x button to

continue it's going to ask for your

firmware so make sure your USB drive is

still plugged in and then press the

start and select buttons at the same

time it will now begin checking your USB

drive for that hfw file once it's

verified the file it's there it's now

going to begin the process of preparing

to update just go ahead let it do its

thing and wait for the next step just

like before it's going to bring you to a

system update page where you can press

the PS button it's going to check for

the update file yet again and from here

make sure you understand you've read

through the user agreement once that's

been done you can accept it if you so

choose to and then tap the x button to

begin the update process it's now going

to install this firmware update again

now just like before if it installs it

part way and then it jumps to 100% And

reboots that is to be expected nothing

is wrong there that means it's been

applied successfully now the other thing

to keep in mind is you must do two

installs of this firmware now it doesn't

matter which way you do them you can do

one through the xmb and one through safe

mode or you can do both of them through

the xmb if you're able to or you can do

both of them through safe mode if you

want to it does not matter but it is

most recommended to have two good

installs completed of hfw this is mainly

recommended to minimize any possible

install errors and mainly so we can get

Ros 0 and ros1 on the internal firmware

matching once your safe mode

installation is complete your system

should reboot and it will bring you to

this screen here you're going to have to

just adjust your audio video output so

from here you can turn on your

controller and say yes and as long as

you can see everything on screen here

once the resolution changes you can say

Yes again and now continue on with our

video output settings now dialed in you

should have completed two successful

installs of hfw now again the system is

not going to look any differently but if

you've done those two installs you

should be ready to continue on now with

that make sure your PS3 is connected to

the internet now this step here is

optional but if you want to make use of

PS3 henss on the Fly licensing or

relicensing capabilities for any type of

PSN based packages that you might

install you do need to activate your

console on PSN so there's a couple ways

of doing this here if you want to do it

now you can go to the PlayStation

Network column you can go ahead and sign

into your PSN account and from here you

can step through the process of

activating your console once it has been

activated you should be good to go

however if you do not want to sign into

PSN or if you cannot for whatever reason

don't worry you could also do this later

on once you have PS3 hin installed using

the Apollo save tool I'm not going to go

into details with that here but I do

have a video dedicated to that if you

want to activate your system offline but

you can use whichever method will work

best for you because we're now going to

go through the process of finally

installing PS3 H for this here you can

navigate over to the network column and

open up the internet browser and there's

going to be some prerequisite work that

we need to complete when this comes up

tap the triangle button go up to tools

and inside of here we're going to need

to change a few things go to confirm

browser close and we're going to change

this to off next go back into your tools

and change the homepage to use blank

page then hit okay we go to tools once

again and this time around we're now

going to clean up the browser by

deleting cookies we now need to delete

search

history we need to delete cache and

finally we can delete authentication

information with all that deleted tap

the circle button to exit out and the

browser should now close without a

prompt once that's been closed out the

browser has been cleaned up essentially

so we can now open up the internet

browser and we're going to start the

process of loading up the web exploit

when you get your blank page tap the

start button and we're going to erase

this here and this is the website we're

going to go to it should look exactly

like this here it will be

HTTP PS3 exploit. me it will look

exactly like this it is spelled exactly

like this and keep in mind the word

exploit does not have an e in it so once

you have this address here you're going

to go down to start or enter and wait

for the page to load now when it loads

in you're probably going to get a new

type of message of the day here

essentially you can read it and tap okay

and the first thing you should do once

you tap through that is hit the select

button on your controller and add this

page to your bookmarks we can close out

of there so that way we can always

access this later on now let's go ahead

and install PS3 hin for this you can

come up here go to PS3 hin and the exact

page that we're going to be looking for

is going to be the hen autoinstaller

this is the newer one here and this is

the one that is most recommended because

it seems to work quite well and it does

a lot of the heavy lifting for you for

this you can tap X on here and it should

open up in a new tab and there's going

to be a file that will automatically

start downloading once it downloads we

can hit back and that's all done it is

worth noting here before we continue on

with the PS3 install as it shows in Big

Red Letters on the front of the PS3

exploit page for PS3 hin do not enable

FSM factory service mode with PS3 hin do

not install CC API with PS3 hin these

are two big warnings here that are put

here on purpose because you can cause

damage to your system if you do either

one of these now thankfully this is

nothing that you can do accidentally but

you'll be surprised with people getting

their consoles into factory service mode

or installing CC API on PS3 H you've

been warned at this point now at this

point I recommend you hit the select

button on the PS3 hin Auto installer add

this to your bookmarks close out of here

and for the best rate of success go

ahead and now close out of the browser

it should bring you back here but now we

can open up the browser yet again and we

can make use of those bookmarks once

we're here tap the select button go to

the PS3 hen Auto installer and load it

up now it is going to ask you to

download this file again so we can

overwrite and save give it a few moments

to download and once it's been completed

hit the back button and at this point

here it is pretty self-explanatory you

just have to tap X on autoinstall hin so

hit that there and it should now give

you a message saying Auto hin installer

has been completed successfully so now

it's going to work on the process of

installing hin and as you can see it was

able to set up the initial stages of hin

here but now it's going to download a

package file so just wait for this

package to download don't touch the

controller Now do keep in mind it's not

always going to be as seamless as what I

showed right there occasionally you

might have to try a few times and it

might even give you an air sometimes

saying that you have to reboot the

console and try again if that happens

reboot the console try again open up

that bookmark directly and it should

hopefully work for you and once this

download is complete we can now hit back

and we're going to wait it now needs to

install this package so again just give

it a few moments to do so now once

that's been installed as you can see

it's going to prepare for reboot so

don't touch your controller and let your

console automatically reboot so here we

go your system should now be rebooted it

should boot up a little differently and

in the game column there should be a new

Option here that says enable H well at

this point now your system has been

modified but we need to actually make

use of it so go ahead and tap the option

here to enable H and give it a few

moments it's going to open up your

browser you don't have to touch anything

here but it's going to go through this

process of running the necessary

payloads and then enabling PS3 H now you

should have your package manager right

here if you do that means that you've

successfully installed and activated PS3

H do keep in mind there's times where

you might enable hin and the package

manager does not come up if that happens

just try to enable hin again and if that

still doesn't work reboot your system

completely make sure you turn on your

system again and then try to enable H

and you can tell that it's been enabled

properly because the package manager

will show up now the package manager is

so important because not only it shows

that hin is is working in the background

but you are able to well install

packages from here so make sure your USB

drive is still plugged in now go to your

package manager go to install package

files go to standard and you can pick

any of the home brew packages that

you've put on the root of your USB drive

hopefully you should have multim man

here so if you're ready to install it

tap the x button on this and give it a

few moments it's now going to install it

directly from your usb drive to the

internal storage of the console and this

is how any type of home rout

installations are going to work so once

that's done go back and you should now

have a new Option here or a new

application called multim man with h

enabled go ahead tap multim man and Boot

It Up Now if this is your first time

using multim man you will have to go

through the agreement here make sure you

understand this and once you are all

okay with that it will take some time to

install the mmcm data to the internal

drive and it's going to do a little bit

of a reboot here once the standard theme

is applied check this out we are now in

multim man congratulations you should

hopefully be running your first piece of

PS3 Homebrew on here now I do have a few

games that are showing up because these

are games that I had installed prior

when I had PS3 hin on this system before

I'm not going to be covering game

installation here however if you need a

full rundown and tutorial over multim

man itself I will have one linked Down

Below in the description but one thing

you can do while you're here which I

always recommend is go over to settings

go all the way down to one specific

setting here it's going to be theme

audio and I recommend just changing that

to disabled and once that's all done you

should be good to continue on here from

here you can back up your own PS1 PS2

PS3 games if you're ripping PS2 games

from dis you can use this section here

the Retro section to encrypt them as PS2

classic so they would actually run on

PS3 H and you can also use FTP

capabilities meaning that you can hook

up your system to your local area

network and then transfer files from

your computer to the console using your

network it's a pretty nice application

that allows you to do all that however

we're not going to be covering that here

I really just wanted to show you all how

you can download and install and run a

piece of Homebrew so with that at least

completed we can now come here bring up

the xmb and we're going to quit out of

multim man once you exit out of multim

man it is going to change its name on

your xmb to mmcm and don't worry about

that that is to be expected however as

you can see you're pretty much good to

go here now I do want to cover some

basics of PS3 hin and just some general

usage for that I'm actually going to

restart the console here so I can show

you how this all looks from a fresh boot

up so for some of the basics of PS3 hin

first of all we no longer need our USB

flash drive so you are welcome to unplug

it now keep in mind every single time

you fully reboot your PS3 or if you

decide to play a PS2 game and then exit

out of it you are going to need to Reen

enable hin yet again and having hin

running is going to be necessary for any

type of Homebrew any type of utilities

any type of emulators or any type of

resigned games in order for them to boot

up if you try to open up anything that

you've installed through PS3 hin without

enabling hin you are going to get an air

message so one of the most iconic ones

I'll show you is let's try and run

multim man right off the bat as you can

see it will give you an 800 117 air

meaning that you did not activate PS3

hin so to fix that it's pretty easy you

just have to come up to enable hin tap

this option right here to enable it and

wait for hin to enable another nice

benefit as well too is that even though

you needed the internet to set up PS3

hin you no longer have to stay connected

to the internet so if you want to

disconnect your console from the

internet that is just fine you can still

enable hin even when you're offline and

here like I said the package manager

does show up and now if we try to boot

up multim man we can give this a shot

and as you can see look at that multim

man was able to boot up without any

issues so that is just an example right

there it seems to hang up a lot of

people but if you're getting an air like

that remember anytime you're trying to

run any of your backup games any home

brew emulators tools any of that you

have to make sure hin has been enabled

now let's go ahead and exit out of

multim man here and get back to the xmb

when you exit out of here the nice thing

is you do not have to keep enabling H in

fact fact enable hin ends up

disappearing just keep this in mind if

your package manager is showing up that

means that hin has been enabled the only

time you need to reenable hin is if your

PS3 completely Powers down and you turn

it back on or if you play a PS2 game and

you exit out of that PS2 game those are

the times you need to reenable H to run

any of the other games or applications

that are right here you also get a nice

new section right here in the network

column called PS3 exploit home there's

there's actually a couple of them here

but if you ever need to access the PS3

xit website immediately you can come

over to the PS3 exploit home option and

once this loads in here check this out

as long as you're connected to the

internet it should load up the PS3

exploit website so we can close out of

there one of the last things here is

going to be the hybrid firmware tools

and this will show up every time you

enable PS3 H so you can come in here and

you have a whole lot of options that you

can check through now I do recommend

don't go crazy here you are going to

want to at least read these and see what

they do because most of them will

probably not be for you but it's some

other nice options that you have

available here on your now modified PS3

console now if you've been able to

follow this tutorial successfully I do

want to give a shout out and a thank you

and I do recommend you also give your

thanks to the PS3 exploit Team without

them here this would not have been

possible and they've done a fantastic

job really just heading this for several

several years now at this point making

some really awesome tools developments

and not only that but even hosting them

and keeping them maintained for the

masses here so a big thank you and Shout

Out goes to them if you do support their

work and you like what they do they do

always take donations which are

available on their PS3 Expo site right

here so if you've gotten any type of

value out of their work I would always

recommend throwing a donation their way

they definitely deserve it anyways that

is about it for this video here

hopefully you should have taken your

stock PlayStation 3 and you should now

be running the latest version of PS3 h

on the latest firmware available it's a

pretty nice tool right here and you

should be able to hopefully have a lot

more fun with your PS3 and squeeze some

more power out of it anyways that is

about it for this video here as I always

say this Mr Mario signing off thank you

all for watching everyone if you enjoyed

this video a like would absolutely be

appreciated and if you didn't like it a

dislike is fine as well

too

[Music]