Original subtitles

In this tutorial we will learn how to create remaining views.

At first we will open one part.

To take the trials we will take this plate open.

As a matter of view we click on start, mechanical design, drafting.

We will choose this option front top left and we will modify the sheet size to A2.

Then zoom fit, click and drag and place the views.

I don't need these views, remove it.

Then to display the center line and hidden lines right click on the view properties and

tick hidden lines center line axis.

Okay.

Now here we already have seen how to create front view and projection view.

This is auxiliary view, click on auxiliary view.

Then define one line, give the first point, give the second point.

OXRV view will be normal to this line, click the second point.

Then give the direction, you want to create view from this direction, take your cursor

to on that side.

Here it is showing the arrow direction.

When you take your cursor above, it is showing the arrow direction.

From that direction the view will be created.

Then give the position for the view, the auxiliary view is created in this direction.

If you want to remove the auxiliary view, select it and delete it.

It will be removed.

Then we are seeing our DDI symmetric view.

Then next is object section view, click on object section view.

Then give the first point of the section line and give the second point.

If second point is your last point, then double click there.

Then take your cursor below and click there.

It has created the section view for this AA section line.

To change the hatching double click on it, from here choose hatching and from here you

can control the pitch.

I will take 2.5, then add to that.

And click on.

Okay.

If I do section line with 2 points, you can defend the section line with multiple points

also.

Click on section object view.

Suppose I want to defend section line like this.

Give your first point, tag the point, give your first point, give your second point, then

give the third point, fourth point, take up.

And then double click to end the section line definition and give the position for the

view.

So it's for your section line that we will be created.

The section view A name will be added automatically.

You can drag the text and place it wherever you want it.

Then next is align section.

For align section view, we will need circular or cylindrical part.

We will open one more part.

We will take this flange open.

Then again click on window, click on triangle.

Then create one front view.

Click here and select front view.

Click on window, select flange.

Click one surface for front view.

I want to change the angle for these holes.

By using this arrow, you can change the angle and click outside.

Then to create align section view, click here.

Then give the first point of the line, take your cursor, give the second point, then give

the third point, drag this center point and give the third point.

And while giving third point, double click there, give the position for the view.

In the case of align section view, this line will be aligned with this vertical line.

And after that this view will be created.

Therefore if you project this circle, this circle is not here, but it is here.

But in section view, it is showing here.

Because it has been rotated, align with this first line.

And after that, this section view is created.

This section view is very useful for cylindrical or circular objects.

The next is object section cut.

In section cut, only the section lines will be shown.

Object band it will not be shown.

We will try this object section cut.

Suppose we will create one section cut here.

Then double click, take your cursor below and click there.

Now here only section object is shown and these lines are not shown.

In the case of section view, band lines will also be shown.

In the case of cut, band lines will not be shown.

Only the actual cut will be shown.

The next is detail view.

Click on detail view.

Then create one circle in the area where you want to show the detail view.

Suppose I want to create detail view for this cut.

Click inside it, take your cursor away and click there.

If I want to create detail view for this view, then I have to make this view active.

Now right now this view is active.

We will escape it.

To make the view active, click on the view right click and click on activate view.

Then again click on detail view.

Then give the center point, create one circle and click there and take your cursor away

and click there.

It will create the larger view for the selected portion.

And if you want to increase the scale of this view, right click on it and click select

properties.

And from here you can increase the scale if required.

You will have to change this first parameter.

Then click on okay.

In this way you can change the scale of the view.

And here arrow and the name of the view is shown.

If you select this and right click and properties.

And from here this shape can be indicated in three ways.

Now it is with later line.

If you want you can choose this and apply.

It will show the name of the view like this.

And if you choose this and apply, it will show like this.

Click on okay.

Then next is detail view profile.

Now we have created a detail view with circle.

You can also create a detail view with lines.

Suppose I want to create detail view here.

At first we will have to activate the view.

Then we will have to create detail view.

Again to activate this view select the view right click.

Then click on activate view.

Again click here for detail view profile.

Give the first point.

If the second point rate your shape for the last point, double click.

It will create the profile.

Then give the position for your detail view.

You just increase the size of the sheet.

Right click on the sheet.

Properties will take the event size.

Apply.

Then drag the views.

In this view this profile detail view is created.

And if you want to reposition this f, you can raise the first mouse button and drag

it and place it at comfortable position.

And if you want to change the size of this text, just select it.

But from here you can change it size.

You can make it bold.

You can change it font also.

Then next is clipping view.

To create a clipping view other view should not be there.

We will just delete these views.

Then click here and click on clipping view.

You can defend the clicking view by creating a circle.

Give the center point.

The center portion of this view is inside the circle that will be kept as it is.

Then give the radius point and remaining portion will be removed.

Same way you can create clipping view by a profile also.

Here is the clipping view profile.

Create your lines.

And for last point double click there.

And as far as that your clipping view will be created.

You cancel the clipping view right click on the view.

Click on front view and click on this and click.

It will cancel the clipping view.

The next view is broken view.

If you want to show break for the long object, I will open one more object.

Click on open.

I will take this shaft open.

Click on window.

Click on drawing one.

Then again create one front view.

Click on front view.

Click on window.

Click on shaft.

Then give the direction for front view.

I just want to make it vertical.

Click outside.

Just drag it and place it inside the sheet.

Click on broken view.

Give the first point for the break line.

Then define whether you want it vertical or horizontal.

Take your cursor on that side.

Then give the position.

Then give the second point.

The second point will define the portion to be removed.

The portion between these two lines will be removed.

Click there and click outside.

The inside portion has been removed.

If you want to change the line type, select the line types, right click, properties.

And from here you can define different line types.

Apply.

Okay.

If you want to cancel the broken view, right click on it.

Take your cursor to front view object and click on unbreak.

It will again bring back the original view.

Then next is breakout view.

I will just cancel this detail view.

And here I want to show the breakout view.

Again at first I will have to activate this view.

Select the view right click and click on activate.

Then click here and select breakout view.

Then create one shape around the portion where you want to create the breakout view.

Then double-click for the last point.

And give the position of the breakout.

Up to what position you want to break out.

Suppose I want to break out up to this position.

Click on okay.

Here the breakout view is created up to that tip.

It is very important if you want to show some hidden detail on this spot.

That's all.

Thanks for watching.

We will stop.