Original subtitles

Welcome back in this tutorial we will create Kotter Pin 3D model using Rep command.

So let's start.

So you want to create Kotter Pin using this drawing.

So click on start, mechanical design, part design.

Okay.

Then at first we will have to create a path curve.

So and I want to create a vertical Kotter Pin.

So for a sketch click on sketch and select the vertical plane.

Then at first we will create this circle of radius 5 and these two horizontal lines.

So circle, center point, constraint, give the diameter of 10.

Zoom it and draw two vertical lines.

And I want to actually this vertical line symmetric around axis.

So I will take one axis from the center and select this line, press control and select

line and axis.

Then click on constraint, define in dialogue box and click on symmetry.

Okay.

Then we will give the gap between these two lines.

So click on constraint and we want the gap of 2.5.

So double click and give 2.5.

And next thing we want is the length of the line.

So length of the line from the center is 100.

So we will give constraint from this edge.

We want the end point at the distance of 100.

And same is the case with this 100.

Then we will need a fillet here, fillet of radius 10.

So using this corner tool we will create one fillet corner.

Click on this line, this curve and click there.

Actually, we don't want to train this circle.

So we will just undo it and click on the corner.

And from here we will say that no trim.

We don't want to trim anything.

Select this option.

Then select on the circle and the line and give the point.

Then double click this and give the radius of 10.

Then I want the same on the other side.

I can mirror it.

So select mirror.

Click this object and this axis.

So it will be mirror around that axis.

Then unwanted need to be trimmed.

So click on this quick trim and remove the unwanted object.

Just double click so that trim will continue to work.

We don't have to click it again and again.

Then click on jump fit.

So in this way this profile curve is ready.

Check that it is properly trimmed.

Then click on exit workbench.

Zoom fit.

Then we will have to create one plane here at the bottom.

So click on plane.

Select this line and this point.

Okay.

Then click on sketch.

Select the plane.

Now here we want.

We want to create this section.

Now we want to create it from the upper side.

So we will make it normal again.

Click on normal view.

So it will be a plane.

Okay.

So we will create one circle.

So circle radius is 2.5.

So click on constraint.

Give the diameter of 5.

Then there is one horizontal line at 3.5.

So we will create one horizontal line.

And we will give the constraint dimension.

From this circle to this line, it is 3.5.

Then we will quickly trim double-click on quick trim and remove all the unwanted shape.

So we want curve like this.

Okay.

Then actually we want to coincidence this line.

Okay.

Undo it.

This escape actually.

Undo.

Okay.

Then we want to coincidence the click on this line.

Control this point.

And then click on constraint-definite dialogue box.

Coincidence.

Okay.

So we have kept that line aligned with this end point of this line.

And we kept the shape on the upper side.

So that it will sweep like this.

Then exit workbench.

Zoom fit.

Okay.

The shape is already selected.

Then click on rip.

As the shape was selected, it got selected automatically.

Click on the center curve.

This one.

And click on the view.

And okay.

And zoom fit.

So in this way, this cutter pin is ready.

Zoom fit.

So in this way, you can create the cutter pin.

So as per drawing, we have created this property.

So thanks for watching.

If you want to view next tutorial, we can visit here.

If you want to see the next saw exercises, we can visit here.

If you want to view the complete cut here tutorials, you can visit this playlist.

Or you can from here, you can subscribe.

So we stop here.

Thank you.