Original subtitles

Welcome back in this tutorial we will create one object based on what we learn in previous

tutorial.

So we will be creating this object.

So let's start.

Click on start mechanical design, part design.

Then at first we will create this base plate of 300 by 150.

So it is horizontal.

Therefore we will take horizontal plane for sketch.

So click on sketch, select the horizontal plane and create one rectangle from center with

respect to center.

Then give the constraint 300 and it is 250.

Then make the pad of it.

So the thickness of pad is 32.

So pad select this rectangle, thickness is 32.

Okay.

Next we want to cut this shape.

So sketch, select this surface, then create it is around center axis.

So we will create one axis from the middle point.

Then we will create one rectangle.

So we want this rectangle to be symmetry around this axis.

So we will select this line, control this line and this axis.

Then click on constraint defined in dialog box and symmetry.

Then select this line, control this line, constraint defined in dialog box.

Go ahead and see this.

Create one circle from the intersection or middle point.

Then click trim.

Double click and remove the unwanted shape.

Then give the parameter constraint.

The vertical length is 30 and depth is 35.

So this is 30.

Then select this line and this circle, constraint defined in dialog box, click on tangency.

So it will remain tangent.

Then constraint this line, it is of 35.

So it is ready.

Then exit workbench, click on exit workbench, zoom fit and pocket.

Look at it, click on pocket and we want through pocket.

So click on up to last.

Okay.

So in this way this pocket is created.

Then we want this pocket on the opposite of this.

So again we will click the plus before the part body and click on this pocket and click

on mirror.

Then select this middle plane.

Okay.

Click on isometric.

So it is ready.

Then next we want to create this whole four roles of DIA 20.

So using whole tool we will create it whole.

Then click this surface, then position sketch, define the constraint.

From this axis how much we want.

So from both sides it is 25.

So give 25.

Constraint this point and horizontal line 25.

Then exit workbench, then diameter is 20.

And we want it up to last.

Okay.

So this hole is created.

Then we want to repeat it at four position.

So for that we will use rectangular pattern.

So first select this whole one and click on this rectangular pattern.

Then give the number of instances to spacing is here 250.

So we will give it 250.

And reference direction is this horizontal line.

Click on that.

So it is created.

Then in second direction instances required are two.

In spacing is this direction is 100.

Then reference direction this line.

And we want it reverse.

So click on reverse.

Okay.

So this is ready.

Then next is this pad is there of 68 and 75 radius.

So we will create again sketch this surface circle and constraint it is 150 diameter.

Exit workbench, then pad.

So pad height is 60.

So we will be 60 here.

Okay.

So fit.

When next is to create this hole, one of the hole.

Again for that suppose we will use hole tool hole.

Click on this surface.

Then position sketch.

So just drag this point here.

So we want it to be select this point and this edge using control.

Click on constant defend end of the dialogue box click on coincidence.

So it will be in line with that.

Then we need to give this gap.

So Fcd is 106.

That is 53.

So using constraint we can give this gap.

It is 53.

Exit workbench, then circle it also of dia 15.

So we will give diameter of 15 up to last is already selected.

We want the through hole.

Okay.

Then again select this hole tool.

Now we want to repeat it using circular pattern.

So click on the arrow below the rectangular pattern and click on circular pattern.

Then defend the number of instances.

We need it 8 atoms.

So we will give it 8.

Then we want it in complete crown 360 degree complete.

Then reference direction select this cylinder.

So it is created.

Then click on.

Okay.

So in this way this object is created.

If you want to view the next lecture visit this video.

If you want to view the next exercise visit here.

And if you want to view the complete cut here tutorials playlist visit here and you can

subscribe this channel from here.

So that's all.

We will stop here.

So thanks for watching.