Original subtitles

‫You guys, welcome back to yet another video and this we do want to learn how to use the move tool.

‫And we also want to learn how to create multiple copies or areas using them all to sort of activate

‫the move tool.

‫You can click on the movie icon in your drawing toolbar, or you can press em on your keyboard to activate

‫the Move tool.

‫So as soon as you activate the module, you can click on the group you want to move.

‫Make sure you click on a group and not any face or page you can Morpheus in image.

‫Which I will show to you shortly.

‫So the more group you simply need to click and then you can either move it the Red X's green axis or

‫even in the blue axis.

‫So I'm just going to move it this way.

‫So go ahead and try using the more tool to move stuff around.

‫Now, if you want to move it locked to the right axis, you can click once to move this and then you

‫can snap it to the right axis by pressing the right Haruki.

‫And now it snaps to that axis.

‫So even if I tried holding over this site and always an obstacle that axis.

‫You can also moved by a particular distance.

‫So as you can see in the bottom right corner, the distance changes and I'm going to type in 25 feet

‫and press enter.

‫So it's moved by 25 feet.

‫Now, if you want to make a copy in SketchUp, you can select the group, press em on the keyboard to

‫activate the Move tool, and now you can press the control key once.

‫Make sure to not press and hold, press and release, and it adds that plus icon to your movie-going.

‫And now you can click once more along the green axis.

‫You can lock into the green axis as well and place it at around 25 feet.

‫So that makes a copy.

‫I'm going to show it to you again.

‫Select the group.

‫Press emoji keyboard, activate the module and then press control on your keyboard.

‫So now you can click and make a copy.

‫Now, if you want to make multiple copies and sketch up or multiply it 10 times, all you need to do

‫is press him to activate the module again.

‫Press control, make sure to press and release and not press and hold, and then click once.

‫Click on the second point to place it and then type in your value, so one entitlement x and then press

‫10 and then press enter.

‫So that's copied it by 10 times.

‫Now, let's say you want to copy it only five times now without pressing anywhere, not even the escape

‫rule or anything in redaction, I'm going to press X five and enter so you can always switch.

‫If you given the wrong value.

‫So that's the copy.

‫10 times.

‫No, let's say you want to copy it to a certain distance and divide that distance equally by five or

‫10 times.

‫So I'm going to select this group.

‫Press him, then press control.

‫I'm going to place it here, another type and divide by a six.

‫And then press enter.

‫It divides the distance from this edge to this edge by six and equally spaces over your group.

‫So that is a quick dip into using the groups.

‫Now you can see that I'm orbiting.

‫It sort of flips this plane, and I'm sure a lot of students are going to face this problem.

‫So the best way to resolve this is by simply going to camera and switching to prospector mode.

‫So if you switch to Prospector mode, you're going to avoid that clipping problem in sketch up.

‫Finally, if you want to edit the group and move or lead this part of the face, you can enter the group

‫and you need to select only this part of the group.

‫So I've selected only that edge for edges and the face.

‫Now I'm going to select the move to click once and I'm going to drag it by, say, two feet.

‫And increased that distance by two feet.

‫So that is a quick tutorial into the tool and how you can copy and make areas or multiple copies and

‫sketch up.

‫We will be using it a lot in the course and in the main course.

‫I don't get used to it, and it'll definitely help you in your workflow.

‫Now the next video going to learn how to use some particular shortcuts, which I personally use in my

‫own workflow.

‫That would definitely help you out since you guys next.

‫VIDEO Just.