Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:06,000
To turn on 116, we're going to continue talking about the dress up menu.
2
00:00:06,000 --> 00:00:11,000
And here we're going to talk about the area fill and arrow.
3
00:00:11,000 --> 00:00:18,000
So the area fill contains two options, area fill creation and area fill modification.
4
00:00:18,000 --> 00:00:21,000
And then we're going to use the arrow.
5
00:00:21,000 --> 00:00:29,000
All you can reach them from the right toolbox, dress up menu, toolbox,
6
00:00:29,000 --> 00:00:42,000
create on area fill creation and select the automatic protection and select the area where you want to make your hatching lines.
7
00:00:42,000 --> 00:00:51,000
For example, for some purposes to indicate that surface or having some kind of cut or whatever.
8
00:00:51,000 --> 00:00:54,000
So let's select this profile.
9
00:00:54,000 --> 00:01:01,000
Let's again, activate and choose the profile.
10
00:01:01,000 --> 00:01:09,000
So you have your hatching lines.
11
00:01:09,000 --> 00:01:12,000
Now let's go to the arrow.
12
00:01:12,000 --> 00:01:21,000
You can select the arrow to create an arrow for between two areas.
13
00:01:21,000 --> 00:01:26,000
So let's for example make an arrow to the edge and that is second edge.
14
00:01:26,000 --> 00:01:29,000
So you are creating an arrow.
15
00:01:29,000 --> 00:01:39,000
I'm going to delete this arrow and this fillet area because there is no need for them in this drawing.
16
00:01:39,000 --> 00:01:52,000
But you have an idea how to use them.
1615
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.