Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:08,760
Welcome back in this tutorial we will create one object based on what we learn in previous
2
00:00:08,760 --> 00:00:09,760
tutorial.
3
00:00:09,760 --> 00:00:12,480
So we will be creating this object.
4
00:00:12,480 --> 00:00:15,160
So let's start.
5
00:00:15,160 --> 00:00:23,480
Click on start mechanical design, part design.
6
00:00:23,480 --> 00:00:28,280
Then at first we will create this base plate of 300 by 150.
7
00:00:28,280 --> 00:00:30,520
So it is horizontal.
8
00:00:30,520 --> 00:00:33,920
Therefore we will take horizontal plane for sketch.
9
00:00:33,920 --> 00:00:43,440
So click on sketch, select the horizontal plane and create one rectangle from center with
10
00:00:43,440 --> 00:00:45,440
respect to center.
11
00:00:45,440 --> 00:01:00,440
Create center rectangle when give the constraint 300.
12
00:01:00,440 --> 00:01:14,280
Then it is 250.
13
00:01:14,280 --> 00:01:15,560
Make the pad of it.
14
00:01:15,560 --> 00:01:20,400
So the thickness of pad is 32.
15
00:01:20,400 --> 00:01:30,920
So pad, select this rectangle, thickness is 32.
16
00:01:30,920 --> 00:01:36,000
And next we want to cut this shape.
17
00:01:36,000 --> 00:01:45,920
So sketch, select this surface, then create it is around center axis.
18
00:01:45,920 --> 00:01:58,120
So we will create one axis from the middle point.
19
00:01:58,120 --> 00:02:04,400
Then we will create one rectangle.
20
00:02:04,400 --> 00:02:08,360
So we want this rectangle to be symmetric around this axis.
21
00:02:08,360 --> 00:02:13,320
So we will select this line, control this line and this axis.
22
00:02:13,320 --> 00:02:19,600
Then click on constraint defined in dialog box and symmetry.
23
00:02:19,600 --> 00:02:25,920
Then select this line, control this line, constraint defined in dialog box.
24
00:02:25,920 --> 00:02:28,760
Go ahead and see this.
25
00:02:28,760 --> 00:02:37,359
Create one circle from the intersection or middle point.
26
00:02:37,360 --> 00:02:46,560
Then click frame, double click and remove the unwanted shape.
27
00:02:46,560 --> 00:02:53,960
Then give the parameter constraint.
28
00:02:53,960 --> 00:03:02,000
The vertical length is 30 and depth is 35.
29
00:03:02,000 --> 00:03:11,560
So this is 30, then select this line and this circle, constraint defined in dialog box,
30
00:03:11,560 --> 00:03:12,880
click on tangency.
31
00:03:12,880 --> 00:03:17,360
So it will remain tangent.
32
00:03:17,360 --> 00:03:25,400
Then constraint this line, it is of 35.
33
00:03:25,400 --> 00:03:35,080
So it is ready, then exit workbench, click on exit workbench, zoom fit and pocket.
34
00:03:35,080 --> 00:03:38,280
To cut it, click on pocket.
35
00:03:38,280 --> 00:03:44,640
And we want through pocket, so click on up to last.
36
00:03:44,640 --> 00:03:45,640
Okay.
37
00:03:45,640 --> 00:03:49,040
So in this way, this pocket is created.
38
00:03:49,040 --> 00:03:53,120
Then we want this pocket on the opposite of this.
39
00:03:53,120 --> 00:04:01,120
So again, we will click the plus before the part body and click on this pocket and click
40
00:04:01,120 --> 00:04:03,720
on mirror.
41
00:04:03,720 --> 00:04:06,960
Then select this middle plane.
42
00:04:06,960 --> 00:04:09,160
Okay.
43
00:04:09,160 --> 00:04:11,480
Click on isometric.
44
00:04:11,480 --> 00:04:13,280
So it is ready.
45
00:04:13,280 --> 00:04:21,560
Then next we want to create this whole four roles of DIA 20.
46
00:04:21,560 --> 00:04:25,280
So using whole tool, we will create it whole.
47
00:04:25,280 --> 00:04:27,960
Select this surface.
48
00:04:27,960 --> 00:04:34,360
Then position sketch, define the constraint.
49
00:04:34,360 --> 00:04:38,640
From this axis, how much we want?
50
00:04:38,640 --> 00:04:41,200
So from both sides, it is 25, 25.
51
00:04:41,200 --> 00:04:45,400
So you give 25.
52
00:04:45,400 --> 00:04:52,560
Then extend this point and horizontal line 25.
53
00:04:52,560 --> 00:04:59,640
Then exit workbench, then diameter is 20.
54
00:04:59,640 --> 00:05:02,400
And we want it up to last.
55
00:05:02,400 --> 00:05:03,640
Okay.
56
00:05:03,640 --> 00:05:08,479
So this hole is created.
57
00:05:08,479 --> 00:05:11,479
Then we want to repeat it at four position.
58
00:05:11,480 --> 00:05:15,880
So for that, we will use rectangular pattern.
59
00:05:15,880 --> 00:05:23,400
So first select this whole one and click on this rectangular pattern.
60
00:05:23,400 --> 00:05:29,840
Then give the number of master says to spacing is here 250.
61
00:05:29,840 --> 00:05:33,520
So we will give it 250.
62
00:05:33,520 --> 00:05:36,000
And reference direction is this horizontal line.
63
00:05:36,000 --> 00:05:37,000
Click on that.
64
00:05:37,000 --> 00:05:44,680
So it is created, then in second direction, instances required are two.
65
00:05:44,680 --> 00:05:51,920
Then spacing is, this direction is 100.
66
00:05:51,920 --> 00:05:56,400
Then reference direction, this line.
67
00:05:56,400 --> 00:05:59,240
And we want it reverse, so click on reverse.
68
00:05:59,240 --> 00:06:00,240
Okay.
69
00:06:00,240 --> 00:06:03,760
So this is ready.
70
00:06:03,760 --> 00:06:12,120
And next is, this pad is there of 68 and 75 radius.
71
00:06:12,120 --> 00:06:23,440
So we will create again sketch, this surface circle and constraint.
72
00:06:23,440 --> 00:06:29,560
It is 150 diameter.
73
00:06:29,560 --> 00:06:36,360
It workbench, then pad, so pad height is 60.
74
00:06:36,360 --> 00:06:39,160
So we will give 60 here.
75
00:06:39,160 --> 00:06:40,160
Okay.
76
00:06:40,160 --> 00:06:43,080
So fit.
77
00:06:43,080 --> 00:06:47,920
When next is to create this hole, one of the hole.
78
00:06:47,920 --> 00:06:58,520
Again for that suppose we will use hole to hole, click on this surface, then position sketch.
79
00:06:58,520 --> 00:07:02,359
Just drag this point here.
80
00:07:02,359 --> 00:07:08,479
So we want it to be select this point and this edge using control.
81
00:07:08,479 --> 00:07:11,560
Click on constant, different end of the dialogue box, click on coincidence.
82
00:07:11,560 --> 00:07:14,039
So it will be in line with that.
83
00:07:14,039 --> 00:07:16,880
Then we need to give this gap.
84
00:07:16,880 --> 00:07:19,320
So Fcd is 106.
85
00:07:19,320 --> 00:07:21,680
That is 53.
86
00:07:21,680 --> 00:07:26,680
So using constraint, we can give this gap.
87
00:07:26,680 --> 00:07:31,080
It is 53.
88
00:07:31,080 --> 00:07:37,080
Exit workbench, then circle, it also die of 15.
89
00:07:37,080 --> 00:07:42,280
So we will give diameter of 15 up to last is already selected.
90
00:07:42,280 --> 00:07:44,880
We want the through hole.
91
00:07:44,880 --> 00:07:46,360
Okay.
92
00:07:46,360 --> 00:07:48,120
And again select this whole tool.
93
00:07:48,120 --> 00:07:52,280
Now we want to repeat it using circular pattern.
94
00:07:52,280 --> 00:07:58,200
So click on the arrow below the rectangular pattern and click on circular pattern.
95
00:07:58,200 --> 00:08:00,080
Then defend the number of instances.
96
00:08:00,080 --> 00:08:03,080
We need it 8 atoms.
97
00:08:03,080 --> 00:08:07,359
So we will give it 8.
98
00:08:07,359 --> 00:08:12,200
Then we want it in complete crown, 360 degree complete.
99
00:08:12,200 --> 00:08:15,799
Then reference direction select this cylinder.
100
00:08:15,799 --> 00:08:18,080
So it is created.
101
00:08:18,080 --> 00:08:23,159
And click on okay.
102
00:08:23,159 --> 00:08:28,440
As a matter, zoom fit.
103
00:08:28,440 --> 00:08:32,120
So in this way, this object is created.
104
00:08:32,120 --> 00:08:38,159
If you want to view the next lecture, visit this video.
105
00:08:38,159 --> 00:08:41,840
If you want to view the next exercise visit here.
106
00:08:41,840 --> 00:08:49,640
And if you want to view the complete Katia tutorials playlist visit here and you can subscribe.
107
00:08:49,640 --> 00:08:52,040
Subscribe this channel from here.
108
00:08:52,040 --> 00:08:53,040
So that's all.
109
00:08:53,040 --> 00:08:55,800
We will stop here.
110
00:08:55,800 --> 00:09:21,280
So thanks for watching.
8678
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.