Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:07,200
This is tutorial number 53 and it covers how to do a basic multi-section solid within
2
00:00:07,200 --> 00:00:08,200
KTav5.
3
00:00:08,200 --> 00:00:12,800
To start off, open up a new KTav5 part file.
4
00:00:12,800 --> 00:00:18,640
Once you've done that, the multi-section solid tool is right here.
5
00:00:18,640 --> 00:00:21,600
So what we're going to be doing in this tutorial is we're going to do just a basic one to start
6
00:00:21,600 --> 00:00:22,600
out with.
7
00:00:22,600 --> 00:00:27,400
And then the next tutorial, we're going to be doing multiple ones and the one after that
8
00:00:27,400 --> 00:00:31,000
we're going to be doing advanced multi-sections.
9
00:00:31,000 --> 00:00:36,300
So what we're going to do is we're going to take a plane, create an offset plane from
10
00:00:36,300 --> 00:00:37,300
it.
11
00:00:37,300 --> 00:00:43,080
So we have two planes, create two sketches, and then use this tool to bring them together.
12
00:00:43,080 --> 00:00:48,080
So in the last tutorial, I showed you how to create the offset planes.
13
00:00:48,080 --> 00:00:54,080
So let's click a plane and let's go to the shape design, the generative shape design,
14
00:00:54,080 --> 00:00:55,879
and let's offset a plane.
15
00:00:55,880 --> 00:01:02,960
So let's click the XY and let's offset a plane that's 200 millimeters away.
16
00:01:02,960 --> 00:01:03,960
Click OK.
17
00:01:03,960 --> 00:01:08,120
And if you zoom out, you can see that we have the offset plane.
18
00:01:08,120 --> 00:01:10,640
So what we're going to do is we're going to create a sketch on there and we're also
19
00:01:10,640 --> 00:01:16,200
going to create a sketch on here and then we're going to bring the two together.
20
00:01:16,200 --> 00:01:22,280
So let's go back to the mechanical design, go to the part design.
21
00:01:22,280 --> 00:01:26,960
And what we're going to do is start making our sketches so let's click on this plane
22
00:01:26,960 --> 00:01:31,800
here, click sketch, and let's draw a circle right in the middle.
23
00:01:31,800 --> 00:01:36,280
So we're just going to do a nice easy basic one at first.
24
00:01:36,280 --> 00:01:40,240
And let's make the first circle 200 millimeters in diameter.
25
00:01:40,240 --> 00:01:42,320
Now we'll go out.
26
00:01:42,320 --> 00:01:50,440
We'll choose the other plane, click sketch.
27
00:01:50,440 --> 00:01:55,560
And we'll make this circle in the center again.
28
00:01:55,560 --> 00:01:59,800
But this time we'll only make it 20 millimeters in diameter.
29
00:01:59,800 --> 00:02:01,880
And we'll go back.
30
00:02:01,880 --> 00:02:06,840
So now we have our two sketches that are offset from one another.
31
00:02:06,840 --> 00:02:09,479
So we're going to bring them together to make a solid.
32
00:02:09,479 --> 00:02:12,240
So let's click the multi-section solid.
33
00:02:12,240 --> 00:02:15,280
We'll click one sketch.
34
00:02:15,280 --> 00:02:17,840
And then we'll click the other sketch.
35
00:02:17,840 --> 00:02:20,600
Click the preview to see if it works.
36
00:02:20,600 --> 00:02:22,800
And you can see the preview works.
37
00:02:22,800 --> 00:02:26,720
Now when you're doing this, sometimes you're going to have to flip these arrows to get a
38
00:02:26,720 --> 00:02:27,720
good result.
39
00:02:27,720 --> 00:02:28,720
Now I just flipped one.
40
00:02:28,720 --> 00:02:31,520
I'm going to click preview and there's a problem.
41
00:02:31,520 --> 00:02:35,000
And it's going to show you that everything kind of collapses on itself.
42
00:02:35,000 --> 00:02:39,160
So you're going to have to flip the arrow.
43
00:02:39,160 --> 00:02:44,320
You're going to have to flip the arrow on one of them if you can find it.
44
00:02:44,320 --> 00:02:46,240
I think I've lost my arrow.
45
00:02:46,240 --> 00:02:48,240
So there it is.
46
00:02:48,240 --> 00:02:51,800
I'm going to click on that arrow to flip it, click preview, and now it's going to work.
47
00:02:51,800 --> 00:02:55,480
So if you ever run into problems with it, you're going to have to play around, toggle with
48
00:02:55,480 --> 00:02:58,520
the arrows until everything goes the right way.
49
00:02:58,520 --> 00:03:00,400
Now let's click OK.
50
00:03:00,400 --> 00:03:02,720
And we've got our part.
51
00:03:02,720 --> 00:03:05,400
Now let's play around with some of these sketches.
52
00:03:05,400 --> 00:03:09,880
So let's open up the multi-section there.
53
00:03:09,880 --> 00:03:13,560
And let's click sketch two.
54
00:03:13,560 --> 00:03:16,960
Let's delete the sketch here and let's move it around a little bit.
55
00:03:16,960 --> 00:03:26,960
So let's draw the circle up here and just drag it down a little bit and make it 20 millimeters
56
00:03:26,960 --> 00:03:29,040
again.
57
00:03:29,040 --> 00:03:32,360
So make it 10 radius, 20 millimeter diameter.
58
00:03:32,360 --> 00:03:33,880
Go back out.
59
00:03:33,880 --> 00:03:38,120
And now you can see that it's kind of offset to the side there.
60
00:03:38,120 --> 00:03:42,840
So with the multi-section, what you have to do is create just in the basic one that we're
61
00:03:42,840 --> 00:03:48,320
doing right now, just create those two reference planes, create sketches on each of those planes,
62
00:03:48,320 --> 00:03:52,360
and then select them, make sure that you have those arrows go in the right way, and then
63
00:03:52,360 --> 00:03:57,920
you're able to create an extrude or a multi-section body.
64
00:03:57,920 --> 00:04:00,800
Now let's just delete this one and let's do one with squares.
65
00:04:00,800 --> 00:04:05,040
So let's delete it.
66
00:04:05,040 --> 00:04:12,800
And let's click this plane here, click sketch, and let's draw in.
67
00:04:12,800 --> 00:04:18,880
Just a quick sketch, one that looks like a square, and we'll go out.
68
00:04:18,880 --> 00:04:27,240
And on the offset plane to that, so the xy, let's click sketch, and let's just draw a thinner
69
00:04:27,240 --> 00:04:29,920
one, so like a rectangle.
70
00:04:29,920 --> 00:04:32,920
So once you have that, go out.
71
00:04:32,920 --> 00:04:35,800
And let's do this multi-section again.
72
00:04:35,800 --> 00:04:41,680
Click the two sketch profiles, click preview to see what it looks like, and you got them
73
00:04:41,680 --> 00:04:44,280
sweeping together to create a solid.
74
00:04:44,280 --> 00:04:48,040
Click OK, and you have your part.
75
00:04:48,040 --> 00:04:53,200
So for the basic multi-section solid body, what you have to do, like I said, make those
76
00:04:53,200 --> 00:04:59,920
two reference planes, and then create those two sketches to bring them together.
77
00:04:59,920 --> 00:05:04,040
And that concludes our tutorial on how to use the basic multi-section solid within KT
78
00:05:04,040 --> 00:05:19,040
of E5.
7241
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.