Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:53,206 --> 00:00:56,551
Narrator: in the american
Wild west, the gun ruled,
2
00:00:56,655 --> 00:00:59,551
And that gun was usually
A six-shooter revolver.
3
00:00:59,655 --> 00:01:01,931
Today, replicas
Of those revolvers
4
00:01:02,034 --> 00:01:03,965
Can take you back to dodge city,
5
00:01:04,068 --> 00:01:06,758
And they do
At cowboy shooting competitions.
6
00:01:06,862 --> 00:01:08,344
It's a chance to engage
7
00:01:08,448 --> 00:01:11,827
In a little old-fashion
Gunslinging for old time's sake.
8
00:01:16,896 --> 00:01:18,137
With its six-shot cylinder
9
00:01:18,241 --> 00:01:20,379
And innovative
Cocking mechanism,
10
00:01:20,482 --> 00:01:24,724
The 1873 colt was carried
By the likes of jesse james.
11
00:01:27,965 --> 00:01:30,379
They start
These automatic replicas
12
00:01:30,482 --> 00:01:33,000
By shaping and machining
The gun's frame.
13
00:01:37,551 --> 00:01:40,517
A computerized blade
Carves the cylinder.
14
00:01:40,620 --> 00:01:42,793
It cuts slots
For the ammunition
15
00:01:42,896 --> 00:01:46,620
And notches for rotating the
Cylinder after a shot is fired.
16
00:01:50,344 --> 00:01:53,517
A technician
Files down rough edges
17
00:01:53,620 --> 00:01:57,793
So the parts
Will fit together perfectly.
18
00:01:57,896 --> 00:02:01,103
He then screws the curved grip
And the trigger guard
19
00:02:01,206 --> 00:02:03,000
To the frame.
20
00:02:07,379 --> 00:02:10,655
He assembles the wooden grip
Casing to the metal back strap
21
00:02:10,758 --> 00:02:14,068
And attaches them to the grip.
22
00:02:14,172 --> 00:02:16,551
Once he confirms
It's a good fit,
23
00:02:16,655 --> 00:02:21,275
He removes the casing the writes
The gun's serial number inside.
24
00:02:21,379 --> 00:02:24,965
He stamps a matching number
Onto the grip
25
00:02:25,068 --> 00:02:28,448
And polishes it and the gun's
Frame to a glossy finish.
26
00:02:35,344 --> 00:02:37,310
He now rolls the model number
27
00:02:37,413 --> 00:02:39,344
And other
Identifying information
28
00:02:39,448 --> 00:02:41,793
Onto the gun's barrel.
29
00:02:44,206 --> 00:02:46,206
To add a bit of flourish,
30
00:02:46,310 --> 00:02:48,034
An artist engraves designs
31
00:02:48,137 --> 00:02:51,310
Copying the artwork
On an original colt.
32
00:02:57,068 --> 00:03:01,724
Another worker now dips
The parts in hot salts,
33
00:03:01,827 --> 00:03:04,724
Then in cold water.
34
00:03:04,827 --> 00:03:06,758
A reaction occurs
35
00:03:06,862 --> 00:03:09,517
That both hardens the parts
A bit and tints them.
36
00:03:09,620 --> 00:03:11,896
In this case,
They turn a bronze color.
37
00:03:12,000 --> 00:03:14,482
This is called
Color case hardening.
38
00:03:14,586 --> 00:03:16,241
The grip and trigger guard
39
00:03:16,344 --> 00:03:19,827
Have been removed from
The gun frame for color casing.
40
00:03:19,931 --> 00:03:22,000
This makes it easier
For the technician
41
00:03:22,103 --> 00:03:26,206
To install the cartridge
Loading gate on the frame.
42
00:03:26,310 --> 00:03:29,275
He files down the mechanism
For rotating the cylinder
43
00:03:29,379 --> 00:03:31,758
To make the dimensions perfect.
44
00:03:31,862 --> 00:03:34,206
He then inserts a bushing
And a pin
45
00:03:34,310 --> 00:03:36,620
In the cylinder's center.
46
00:03:36,724 --> 00:03:40,896
He uses that pin to install
The cylinder in the gun frame.
47
00:03:41,000 --> 00:03:43,586
The pin will also serve
As the axis
48
00:03:43,689 --> 00:03:46,379
For the cylinder
To revolve on.
49
00:03:46,482 --> 00:03:49,068
He slides a couple of test slugs
Into the chambers
50
00:03:49,172 --> 00:03:52,206
To confirm the gap between
The cylinder and gun frame
51
00:03:52,310 --> 00:03:55,724
Is spot on.
52
00:03:55,827 --> 00:03:58,206
He then fits the gun barrel
To the frame.
53
00:03:58,310 --> 00:04:00,655
And, using
A special measuring rod,
54
00:04:00,758 --> 00:04:03,620
He checks the alignment
Of the cylinder and barrel.
55
00:04:08,620 --> 00:04:11,379
He tightens the barrel
To the gun frame,
56
00:04:11,482 --> 00:04:13,620
Using a stick as a lever.
57
00:04:18,655 --> 00:04:21,551
The technician aims
The assembled gun
58
00:04:21,655 --> 00:04:24,586
And eyeballs the alignment
Of the barrel to the frame.
59
00:04:24,689 --> 00:04:25,724
Once he's certain
60
00:04:25,827 --> 00:04:27,931
The configuration
Is right on target,
61
00:04:28,034 --> 00:04:30,551
He installs the gun's hammer
And trigger.
62
00:04:36,655 --> 00:04:39,137
He pops the cylinder
Back into the gun frame
63
00:04:39,241 --> 00:04:42,931
And inserts the rod
For ejecting spent ammunition.
64
00:04:45,000 --> 00:04:47,724
He screws a spring
Into the side of the hammer
65
00:04:47,827 --> 00:04:50,827
And cocks it
In its three different positions
66
00:04:50,931 --> 00:04:53,551
To verify that it's
In working order.
67
00:04:53,655 --> 00:04:57,068
He then reattaches the grip
And trigger guard.
68
00:05:01,241 --> 00:05:03,965
He assembles a flat spring
To the curved grip.
69
00:05:04,068 --> 00:05:05,517
This is the main spring.
70
00:05:05,620 --> 00:05:08,655
It transfers energy
From the trigger to the hammer
71
00:05:08,758 --> 00:05:10,931
To cause the revolver to fire.
72
00:05:15,068 --> 00:05:17,551
Then it's over
To a government testing facility
73
00:05:17,655 --> 00:05:19,551
Called the proof house.
74
00:05:19,655 --> 00:05:21,275
Behind bulletproof glass,
75
00:05:21,379 --> 00:05:23,517
Special equipment
Fires ammunition
76
00:05:23,620 --> 00:05:26,241
At three times
The usual operating pressure.
77
00:05:26,344 --> 00:05:30,034
If the gun can handle this,
It's deemed safe to operate.
78
00:05:32,551 --> 00:05:34,620
After a few more parts
Have been color cased,
79
00:05:34,724 --> 00:05:39,310
This revolver replica is ready
For its target market.
80
00:05:41,310 --> 00:05:43,551
And that would be history buffs
81
00:05:43,655 --> 00:05:47,379
Who are interested
In a real blast from the past.
82
00:06:02,206 --> 00:06:04,862
Narrator: arc trainers can
Give you a full-body workout.
83
00:06:04,965 --> 00:06:07,034
They provide a number
Of exercise programs
84
00:06:07,137 --> 00:06:08,241
To choose from,
85
00:06:08,344 --> 00:06:11,068
Like strength training,
Weight loss, and cardio.
86
00:06:11,172 --> 00:06:12,586
They monitor such things
87
00:06:12,689 --> 00:06:14,896
As heart rate
And calories burned.
88
00:06:15,000 --> 00:06:17,379
Like any piece
Of exercise equipment,
89
00:06:17,482 --> 00:06:21,172
Using one properly is the key
To a safe and healthy workout.
90
00:06:25,862 --> 00:06:27,724
Arc trainers are made
To give you
91
00:06:27,827 --> 00:06:30,172
A wide range of incline
And resistance levels
92
00:06:30,275 --> 00:06:33,551
To let you train as easy
Or as hard as you like.
93
00:06:36,586 --> 00:06:38,551
To start, a tube laser
94
00:06:38,655 --> 00:06:41,413
Machine-cuts and profiles
The steel tubing
95
00:06:41,517 --> 00:06:44,206
That will make
The arc trainer's side frame.
96
00:06:52,241 --> 00:06:55,275
A worker cleans the steel tubes,
Then runs them
97
00:06:55,379 --> 00:06:58,586
Through a computer-controlled
Roll-forming machine.
98
00:06:58,689 --> 00:07:01,517
This machine shapes
All the steel
99
00:07:01,620 --> 00:07:04,241
Used to build
The arc trainer's frame.
100
00:07:10,068 --> 00:07:12,793
They use a robot to weld
All the parts together
101
00:07:12,896 --> 00:07:15,931
Because robotic welding
Is more consistent and accurate
102
00:07:16,034 --> 00:07:17,586
Than hand-welding.
103
00:07:25,137 --> 00:07:27,827
The completed frames
Then get a surface preparation,
104
00:07:27,931 --> 00:07:30,965
Giving the steel
A uniform finish
105
00:07:31,068 --> 00:07:33,586
That is now ready
For powder painting.
106
00:07:37,310 --> 00:07:39,344
Workers then paint the frames
107
00:07:39,448 --> 00:07:42,103
Using an electrostatic
Paint process.
108
00:07:42,206 --> 00:07:45,310
These guns spray electrically
Charged paint particles
109
00:07:45,413 --> 00:07:47,344
That are drawn
To the grounded frames
110
00:07:47,448 --> 00:07:49,793
In a smooth and even coat.
111
00:07:53,758 --> 00:07:56,586
The frames then bake in an oven
For 40 minutes
112
00:07:56,689 --> 00:07:58,655
To cure the paint.
113
00:08:04,137 --> 00:08:06,724
Next come the handlebars.
114
00:08:06,827 --> 00:08:10,172
A worker then makes them
By lubricating a rubber tube
115
00:08:10,275 --> 00:08:12,793
And sliding it
Onto an assembly frame.
116
00:08:12,896 --> 00:08:17,517
He then locks
A preformed metal tube in place
117
00:08:17,620 --> 00:08:20,068
And lubricates it, as well.
118
00:08:23,862 --> 00:08:25,413
He turns a handwheel,
119
00:08:25,517 --> 00:08:27,793
Which brings
The two tubes together,
120
00:08:27,896 --> 00:08:30,379
Forming the handgrip.
121
00:08:30,482 --> 00:08:33,724
He completes the assembly
By screwing on an end cap.
122
00:08:40,620 --> 00:08:43,344
Meanwhile, a worker assembles
The control panel
123
00:08:43,448 --> 00:08:46,689
By putting on the overlays
For the user interface.
124
00:08:50,000 --> 00:08:51,655
She then hooks up
The printed circuit board
125
00:08:51,758 --> 00:08:53,862
That controls the unit.
126
00:08:57,586 --> 00:08:59,241
She closes the housing
127
00:08:59,344 --> 00:09:01,275
But leaves
The connectors exposed
128
00:09:01,379 --> 00:09:04,000
For connection
To the mainframe later.
129
00:09:06,275 --> 00:09:11,241
A worker then attaches a steel
Support fixture onto the frame.
130
00:09:11,344 --> 00:09:13,275
Next comes
This drive-wheel assembly,
131
00:09:13,379 --> 00:09:16,724
Which he bolts
Onto the support fixture.
132
00:09:19,275 --> 00:09:22,206
He puts a drive belt
Around a pulley
133
00:09:22,310 --> 00:09:24,586
That provides various
Resistance levels for the user
134
00:09:24,689 --> 00:09:27,206
And rolls the belt
Onto the drive wheel.
135
00:09:30,275 --> 00:09:33,482
He then uses a pneumatic tool
To tighten down the pulley,
136
00:09:33,586 --> 00:09:35,206
Which stretches the drive belt
137
00:09:35,310 --> 00:09:37,620
And sets it
To the appropriate tension.
138
00:09:41,137 --> 00:09:43,655
Next, he attaches
The computer board
139
00:09:43,758 --> 00:09:46,275
That controls
The various fitness programs.
140
00:09:48,827 --> 00:09:51,137
A worker then installs
The leg bars
141
00:09:51,241 --> 00:09:52,965
Onto the arc trainer's frame
142
00:09:53,068 --> 00:09:56,000
And attaches a foot pedal
Onto each leg bar.
143
00:10:01,000 --> 00:10:05,034
He installs linkage bars
Onto the drive-wheel assembly.
144
00:10:11,000 --> 00:10:13,689
Then he aligns the drive wheel
145
00:10:13,793 --> 00:10:17,517
And puts on
The molded front housing...
146
00:10:17,620 --> 00:10:20,931
Followed by
The protective side covers.
147
00:10:23,793 --> 00:10:25,689
He connects a linkage bar
148
00:10:25,793 --> 00:10:30,034
That extends from each leg bar
To the drive wheel,
149
00:10:30,137 --> 00:10:33,379
Then connects one linkage bar
To each arm handle.
150
00:10:38,241 --> 00:10:41,724
He makes sure all the linkage
Bars are working properly.
151
00:10:44,068 --> 00:10:45,827
Finally, he tests
152
00:10:45,931 --> 00:10:49,137
The free-floating foot pedals
And the dual-action arms,
153
00:10:49,241 --> 00:10:51,965
As well as all the other
Functions and features.
154
00:10:52,068 --> 00:10:55,482
These arc trainers are
High-tech exercise machines.
155
00:10:55,586 --> 00:10:58,896
Some models even come
With a tv.
156
00:11:10,724 --> 00:11:13,310
Narrator:
Used-oil furnaces generate heat
157
00:11:13,413 --> 00:11:16,379
By burning used oil
Without having to refine it.
158
00:11:16,482 --> 00:11:19,275
These furnaces are found
In automobile shops,
159
00:11:19,379 --> 00:11:22,103
Maintenance facilities,
And construction sites.
160
00:11:22,206 --> 00:11:25,172
Transport fleets and trucking
Companies also use them
161
00:11:25,275 --> 00:11:27,275
To turn the used oil
They produce
162
00:11:27,379 --> 00:11:29,655
Into heat for their facilities.
163
00:11:34,517 --> 00:11:39,689
It takes a special furnace
To burn used oil.
164
00:11:39,793 --> 00:11:41,482
Used oil is thick and dirty
165
00:11:41,586 --> 00:11:43,724
Compared
To residential fuel oil
166
00:11:43,827 --> 00:11:46,000
And must be turned
Into a fine mist
167
00:11:46,103 --> 00:11:47,413
To burn properly.
168
00:11:50,448 --> 00:11:53,517
It all starts with
A computer-controlled laser
169
00:11:53,620 --> 00:11:56,344
Making what's called
The front and rear flue plates
170
00:11:56,448 --> 00:11:58,758
Out of steel.
171
00:11:58,862 --> 00:12:00,793
The plates
For this hot-air furnace
172
00:12:00,896 --> 00:12:03,137
Are made of stainless
Or hot-rolled steel
173
00:12:03,241 --> 00:12:05,172
Depending on the size
Of the unit.
174
00:12:08,241 --> 00:12:11,344
A worker then makes what's
Known as the heat exchanger
175
00:12:11,448 --> 00:12:13,551
By joining
The flue plates together
176
00:12:13,655 --> 00:12:15,862
With steel tubes
Called flue tubes.
177
00:12:22,379 --> 00:12:25,551
This device is called
A swagger machine.
178
00:12:25,655 --> 00:12:29,068
It expands just the ends
Of the flue tubes,
179
00:12:29,172 --> 00:12:32,068
Binding them in place
With the flue plate.
180
00:12:39,241 --> 00:12:42,517
Next, he assembles the section
In which hot gases collect
181
00:12:42,620 --> 00:12:44,793
After passing
Through the flue tubes
182
00:12:44,896 --> 00:12:47,000
On their way
Out of the furnace.
183
00:12:52,206 --> 00:12:54,241
He then sets
A combustion chamber
184
00:12:54,344 --> 00:12:56,344
On the top
Of the heat exchanger
185
00:12:56,448 --> 00:12:58,344
And welds them together.
186
00:13:01,034 --> 00:13:03,517
He completes
The heat-exchanger assembly
187
00:13:03,620 --> 00:13:07,344
By welding on a base equipped
With two air-deflector plates.
188
00:13:07,448 --> 00:13:10,689
These square plates
Help direct the ambient air
189
00:13:10,793 --> 00:13:12,275
As it enters the furnace
190
00:13:12,379 --> 00:13:15,241
And circulates
Around the combustion chamber.
191
00:13:21,206 --> 00:13:23,827
Meanwhile, an electrostatic
Powder-coating machine
192
00:13:23,931 --> 00:13:27,000
Paints the outside covers
For the furnace.
193
00:13:30,655 --> 00:13:33,206
Next, they put
On inner air deflectors,
194
00:13:33,310 --> 00:13:35,000
Then assemble the cabinet.
195
00:13:39,827 --> 00:13:44,000
They bolt everything in place,
Then put on an insulated door.
196
00:13:51,896 --> 00:13:54,413
Now he hooks up
A blower control box.
197
00:13:54,517 --> 00:13:56,344
This electrical box regulates
198
00:13:56,448 --> 00:13:58,620
When hot air
Is sent into a room.
199
00:14:02,551 --> 00:14:04,965
A worker then connects
A tester box
200
00:14:05,068 --> 00:14:06,827
To the temperature controls
201
00:14:06,931 --> 00:14:11,758
That measure the temperature
Inside the furnace.
202
00:14:11,862 --> 00:14:14,103
He runs a number of tests
203
00:14:14,206 --> 00:14:16,310
To confirm that both the blower
And the burner
204
00:14:16,413 --> 00:14:18,551
Will turn on or off
When they're supposed to.
205
00:14:21,448 --> 00:14:25,241
He verifies the operation
Of the door
206
00:14:25,344 --> 00:14:27,655
That allows
For cleaning out ash residue.
207
00:14:30,931 --> 00:14:34,586
A technician installs
A 100-watt pencil heater
208
00:14:34,689 --> 00:14:36,689
Inside a brass nozzle adaptor,
209
00:14:36,793 --> 00:14:39,275
Then threads a thermostat
Into it.
210
00:14:39,379 --> 00:14:42,275
This nozzle adaptor
Heats the oil
211
00:14:42,379 --> 00:14:46,655
And turns it into a fine mist
So it burns properly.
212
00:14:49,862 --> 00:14:53,689
She then attaches assembly
Fittings to the adaptor
213
00:14:53,793 --> 00:14:58,310
So she can later mount it
Inside a burner housing.
214
00:15:04,551 --> 00:15:07,034
She checks these fittings
With a leveling tool
215
00:15:07,137 --> 00:15:11,241
To ensure the adaptor will go
On straight inside the housing.
216
00:15:11,344 --> 00:15:14,379
She also installs an assembly
That controls
217
00:15:14,482 --> 00:15:17,689
Oil flow, temperature,
And air pressure.
218
00:15:23,344 --> 00:15:25,482
Then she mounts
The nozzle adaptor
219
00:15:25,586 --> 00:15:27,758
And covers it
With a retention head
220
00:15:27,862 --> 00:15:30,137
That shapes the flame
For optimal heat,
221
00:15:30,241 --> 00:15:33,103
Completing the burner assembly.
222
00:15:35,655 --> 00:15:37,068
A worker then hooks up
223
00:15:37,172 --> 00:15:39,586
The used-oil
And compressed-air lines
224
00:15:39,689 --> 00:15:42,827
To begin testing the burner.
225
00:15:42,931 --> 00:15:47,413
He turns on the oil,
Ignites the burner,
226
00:15:47,517 --> 00:15:49,172
And looks through
An observation port
227
00:15:49,275 --> 00:15:53,241
To verify the burner
Is working properly.
228
00:15:56,241 --> 00:15:59,827
A closer look shows the flame
Is at the right intensity
229
00:15:59,931 --> 00:16:03,172
For optimal heat
With minimal emissions.
230
00:16:03,275 --> 00:16:07,862
The furnace is now ready to turn
Used oil into useful heat.
231
00:16:19,862 --> 00:16:23,172
Narrator: top-of-the-line pizza
Cutters and vegetable peelers
232
00:16:23,275 --> 00:16:24,655
Can be a pleasure to use.
233
00:16:24,758 --> 00:16:27,551
They make preparing and serving
Your favorite foods
234
00:16:27,655 --> 00:16:29,034
Quicker and easier
235
00:16:29,137 --> 00:16:32,931
And are ergonomically designed
For style and comfort.
236
00:16:33,034 --> 00:16:37,551
They are also easy to clean
And guaranteed for life.
237
00:16:42,896 --> 00:16:46,551
Vegetable peelers and pizza
Cutters work like a charm,
238
00:16:46,655 --> 00:16:48,310
Making straight cuts
239
00:16:48,413 --> 00:16:52,000
Without damaging your pans
Or your fingers.
240
00:16:54,068 --> 00:16:55,620
Quality pizza cutters start
241
00:16:55,724 --> 00:16:58,517
With cutlery-grade,
High-carbon stainless steel
242
00:16:58,620 --> 00:17:02,448
From which a stamping press
Punches the cutter blades.
243
00:17:07,655 --> 00:17:08,896
The blades go
244
00:17:09,000 --> 00:17:11,689
Through a three-step
Heat-treating process.
245
00:17:11,793 --> 00:17:17,206
First, they enter
A high-temperature furnace.
246
00:17:17,310 --> 00:17:19,448
Then it's into a deep freezer
247
00:17:19,551 --> 00:17:24,034
To maximize hardness
And corrosion resistance.
248
00:17:24,137 --> 00:17:26,517
Finally, they go
Into a tempering oven,
249
00:17:26,620 --> 00:17:31,344
Which increases the durability
Of the metal.
250
00:17:31,448 --> 00:17:34,172
A polishing machine
With two buffing heads
251
00:17:34,275 --> 00:17:36,827
Then polishes both sides
Of the blade,
252
00:17:36,931 --> 00:17:39,793
Giving it a protective
And cosmetic finish.
253
00:17:45,655 --> 00:17:49,655
A worker than loads the blade
Onto a bevel-grinding machine
254
00:17:49,758 --> 00:17:52,551
That thins out the edge
Of the blade.
255
00:17:56,068 --> 00:18:00,517
It grinds a beveled edge
That is thin enough to cut pizza
256
00:18:00,620 --> 00:18:02,241
But not sharp enough
257
00:18:02,344 --> 00:18:05,310
To cut your finger
Or damage a cutting surface.
258
00:18:08,551 --> 00:18:10,758
A worker puts
A steel-bar insert
259
00:18:10,862 --> 00:18:13,172
Into an injection
Molding machine
260
00:18:13,275 --> 00:18:17,931
That makes
The soft-polymer handle.
261
00:18:18,034 --> 00:18:20,965
He then cools it down in water.
262
00:18:25,551 --> 00:18:28,103
He puts the handles
On an extraction fixture
263
00:18:28,206 --> 00:18:29,793
Which removes the inserts,
264
00:18:29,896 --> 00:18:32,344
Making the handles
Ready for assembly
265
00:18:32,448 --> 00:18:35,000
Along with all
The other molded parts.
266
00:18:36,689 --> 00:18:40,103
He then attaches what's called
A swing arm to the blade holder,
267
00:18:40,206 --> 00:18:42,586
And he secures it in place
With a screw.
268
00:18:48,965 --> 00:18:51,482
He dips the tip of the blade
Holder into lubricant
269
00:18:51,586 --> 00:18:54,068
And uses
A pneumatic-assembly fixture
270
00:18:54,172 --> 00:18:58,620
To insert the blade holder
Into the handle permanently.
271
00:19:03,482 --> 00:19:05,172
Using the swing arm,
272
00:19:05,275 --> 00:19:08,896
He snap-fits the blade
Onto the blade holder
273
00:19:09,000 --> 00:19:11,310
And hides the swing-arm screw
With a cover cap.
274
00:19:14,586 --> 00:19:18,827
Finally, he ensures the blade
Rolls properly and safely
275
00:19:18,931 --> 00:19:22,137
So it will cut through pizza
With ease.
276
00:19:22,241 --> 00:19:23,758
The finest vegetable peelers
277
00:19:23,862 --> 00:19:27,344
Also do their job
Quickly and effectively.
278
00:19:30,862 --> 00:19:32,448
They also start
279
00:19:32,551 --> 00:19:35,068
With cutlery-grade
Stainless-steel blades
280
00:19:35,172 --> 00:19:36,482
That undergo tempering
281
00:19:36,586 --> 00:19:40,172
To ensure the metal is durable
And corrosion-resistant.
282
00:19:44,793 --> 00:19:46,448
After cleaning and polishing,
283
00:19:46,551 --> 00:19:48,275
The blades are dried
284
00:19:48,379 --> 00:19:50,689
In a vibrating medium
Of ground corncob,
285
00:19:50,793 --> 00:19:53,379
Then removed from the tub
By a magnet.
286
00:19:56,275 --> 00:19:59,172
The blades are now ready
For sharpening.
287
00:19:59,275 --> 00:20:01,586
A worker mounts
The peeler blades
288
00:20:01,689 --> 00:20:04,655
On a computer-controlled
Edge-grinding machine.
289
00:20:09,379 --> 00:20:13,896
The grinder sharpens one edge
Of each blade at a time.
290
00:20:17,551 --> 00:20:20,965
Once both sides of the peeler
Blades are fully sharpened,
291
00:20:21,068 --> 00:20:23,655
They're ready for assembly.
292
00:20:27,310 --> 00:20:30,482
Meanwhile,
An injection molding machine
293
00:20:30,586 --> 00:20:32,517
Makes the blade holders.
294
00:20:36,172 --> 00:20:40,620
A worker dips each blade holder
Into lubricant
295
00:20:40,724 --> 00:20:43,206
And inserts it into the molded
Soft-polymer handle,
296
00:20:43,310 --> 00:20:46,000
Joining them together
Permanently.
297
00:20:52,931 --> 00:20:55,655
Finally, he attaches the blade
298
00:20:55,758 --> 00:20:57,793
By deflecting the holder
Just enough
299
00:20:57,896 --> 00:21:01,000
To insert the tip of the blade
Into a tiny hole.
300
00:21:04,206 --> 00:21:06,310
These top-quality
Vegetable peelers
301
00:21:06,413 --> 00:21:09,068
Are sold individually
Or in combination
302
00:21:09,172 --> 00:21:11,172
With other kitchen utensils
Like pizza cutters,
303
00:21:11,275 --> 00:21:14,275
And they sure are handy
In the kitchen,
304
00:21:14,379 --> 00:21:15,862
Even if you're not.
305
00:21:15,965 --> 00:21:18,862
--captions by vitac--
Www.Vitac.Com
306
00:21:18,965 --> 00:21:21,931
Captions paid for by
Discovery communications
307
00:21:24,172 --> 00:21:26,551
If you have any comments
About the show,
308
00:21:26,655 --> 00:21:29,379
Or if you'd like to suggest
Topics for future shows,
309
00:21:29,482 --> 00:21:31,379
Drop us a line at...
24619
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.