Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:01,320
Hello people and welcome to
2
00:00:01,320 --> 00:00:03,630
this new class in where
we're going to see
3
00:00:03,630 --> 00:00:07,500
what is the current workflow
with tax in a sketch,
4
00:00:07,500 --> 00:00:11,090
because SketchUp has its own way
5
00:00:11,085 --> 00:00:14,075
for doing this and it
is not very logical.
6
00:00:14,070 --> 00:00:16,000
I have to say e.g.
7
00:00:16,004 --> 00:00:19,114
as I mentioned at the
end of the last episode,
8
00:00:19,110 --> 00:00:23,250
here we have a complicated
situation with this cylinder.
9
00:00:23,250 --> 00:00:24,840
It has a dashed line.
10
00:00:24,840 --> 00:00:28,680
When if we check the kind
of line of this tack,
11
00:00:28,680 --> 00:00:30,470
it is at a fault line.
12
00:00:30,465 --> 00:00:33,825
It means that it has to
be a continuous line.
13
00:00:33,825 --> 00:00:35,385
What is the reason there?
14
00:00:35,385 --> 00:00:39,035
Well, the reason is
that this cylinder was
15
00:00:39,030 --> 00:00:42,790
drawn beginning in
this untapped tag.
16
00:00:42,785 --> 00:00:47,275
So all the geometry was
placed inside that tag.
17
00:00:47,270 --> 00:00:50,180
Then we made a
selection like that
18
00:00:50,180 --> 00:00:53,540
and we move all the
entities to the cylinder.
19
00:00:53,539 --> 00:00:58,959
But we selected all the phases
and all the visible edges.
20
00:00:58,960 --> 00:01:00,680
This is a cylinder,
21
00:01:00,680 --> 00:01:06,160
so it has a lot of hidden
geometry, hidden edges.
22
00:01:06,155 --> 00:01:08,155
If I go over view,
23
00:01:08,150 --> 00:01:12,740
hidden geometry will see all
of these hidden geometry,
24
00:01:12,740 --> 00:01:16,150
these lines which were
not selected and they
25
00:01:16,145 --> 00:01:20,075
remained inside this
untapped layer,
26
00:01:20,075 --> 00:01:22,285
which has this dashed line.
27
00:01:22,280 --> 00:01:23,720
That is the reason.
28
00:01:23,720 --> 00:01:26,920
So this explanation connects
29
00:01:26,915 --> 00:01:29,605
with what I'm going
to explain now.
30
00:01:29,600 --> 00:01:32,000
What is the best
workflow when we
31
00:01:32,000 --> 00:01:34,400
are using the tax in a sketch?
32
00:01:34,400 --> 00:01:37,900
So imagine that
my current layer,
33
00:01:37,895 --> 00:01:39,835
Let's say that it is
34
00:01:39,830 --> 00:01:43,480
this untapped layer as
it comes by default.
35
00:01:43,475 --> 00:01:47,815
But when I am drawing and I
have organized these tasks
36
00:01:47,810 --> 00:01:52,780
menu using different layers
as cube, cylinder, sphere.
37
00:01:52,775 --> 00:01:57,905
Then I decided to draw something
inside this cube duck.
38
00:01:57,905 --> 00:02:01,505
Then my logic could be to
change the current layer.
39
00:02:01,505 --> 00:02:03,445
So one-click, hear,
one-click here.
40
00:02:03,440 --> 00:02:05,320
Now the currently it is
41
00:02:05,315 --> 00:02:08,585
cubed and then I
draw something, e.g.
42
00:02:08,585 --> 00:02:11,825
this rectangle, then I want
to draw something else.
43
00:02:11,825 --> 00:02:14,745
This time. I know
that this geometry,
44
00:02:14,749 --> 00:02:18,099
I want to be inside
the cylinder duck,
45
00:02:18,095 --> 00:02:20,785
then my logic could
be changed again,
46
00:02:20,780 --> 00:02:24,700
my current layer, unselect
the cylinder duck.
47
00:02:24,695 --> 00:02:28,825
So one-click, one-click
and I draw another entity.
48
00:02:28,820 --> 00:02:33,860
This geometry I know is
placed inside this cylinder.
49
00:02:33,860 --> 00:02:37,600
Let's repeat the process
with this sphere.
50
00:02:37,595 --> 00:02:40,375
Duck, I change the
current layer.
51
00:02:40,370 --> 00:02:44,360
Once the sphere, that
is the current layer,
52
00:02:44,360 --> 00:02:47,330
I draw another rectangle.
53
00:02:47,330 --> 00:02:49,160
Cool, but this is not
54
00:02:49,160 --> 00:02:51,700
the correct way for using
the tax in this case.
55
00:02:51,695 --> 00:02:53,515
Look that if I want to hide,
56
00:02:53,510 --> 00:02:55,580
let's say this cube duck,
57
00:02:55,580 --> 00:02:57,470
one click on the little eye.
58
00:02:57,470 --> 00:02:59,930
Something strange happens here.
59
00:02:59,930 --> 00:03:03,230
The line seems to
not be complete.
60
00:03:03,229 --> 00:03:05,889
If I hide the cylinder dark,
61
00:03:05,885 --> 00:03:06,965
it is more clear.
62
00:03:06,965 --> 00:03:08,635
We don't have this EDS and
63
00:03:08,630 --> 00:03:10,700
something again is
not complete here.
64
00:03:10,700 --> 00:03:12,340
If I hide this fear,
65
00:03:12,335 --> 00:03:13,835
that one click on here,
66
00:03:13,835 --> 00:03:15,755
then this window pops up.
67
00:03:15,755 --> 00:03:18,395
You cannot hide
the current duck.
68
00:03:18,395 --> 00:03:21,215
Okay, so I will change
the current tag.
69
00:03:21,215 --> 00:03:24,085
Let's say the current tag
is the tag tag again,
70
00:03:24,080 --> 00:03:26,360
then I hide this sphere dark.
71
00:03:26,360 --> 00:03:29,350
And again, this is missing.
72
00:03:29,345 --> 00:03:30,515
Two big more clearer.
73
00:03:30,515 --> 00:03:32,695
Let's hide this cube dark.
74
00:03:32,690 --> 00:03:33,980
This is fear tab.
75
00:03:33,980 --> 00:03:36,620
I'll select this
rectangle and I will
76
00:03:36,620 --> 00:03:39,640
move it a little bit
along the green axis.
77
00:03:39,635 --> 00:03:43,945
Then when I unhide the cube
and this fear that look,
78
00:03:43,940 --> 00:03:46,240
what happened, that you imagery
79
00:03:46,235 --> 00:03:49,285
was modify it because
of my movement.
80
00:03:49,280 --> 00:03:54,140
So everything becomes a mess
and y is happening this,
81
00:03:54,140 --> 00:03:55,240
what is the reason?
82
00:03:55,235 --> 00:03:57,575
The reason is because
our logic says
83
00:03:57,575 --> 00:04:00,295
that if we are using
different ducks,
84
00:04:00,290 --> 00:04:03,950
it is like if our
geometry is isolated
85
00:04:03,950 --> 00:04:09,510
inside those tags and cannot
be glue with other geometry,
86
00:04:09,514 --> 00:04:11,074
that is our logic.
87
00:04:11,075 --> 00:04:13,015
It's not the logic of a sketch.
88
00:04:13,010 --> 00:04:14,660
For a SketchUp, ducks
89
00:04:14,660 --> 00:04:17,050
don't work like that
under the symmetry,
90
00:04:17,045 --> 00:04:20,075
can be blue even
when the geometry
91
00:04:20,075 --> 00:04:23,405
is placed inside
different ducts.
92
00:04:23,405 --> 00:04:27,805
So what is the good workflow
for drawing in a schizo?
93
00:04:27,800 --> 00:04:31,060
Don't never change the current.
94
00:04:31,055 --> 00:04:33,625
The current tag by default is
95
00:04:33,620 --> 00:04:38,050
this untapped, dark and you
don't have to change that.
96
00:04:38,045 --> 00:04:41,505
So if I repeat the same
drawing correctly,
97
00:04:41,509 --> 00:04:43,789
I would start my drawing with
98
00:04:43,790 --> 00:04:46,760
this untapped dark
as the current tag,
99
00:04:46,760 --> 00:04:49,910
I will draw my first rectangle.
100
00:04:49,910 --> 00:04:52,800
I will make a group.
101
00:04:53,620 --> 00:04:58,150
If I want that geometry
to be isolated.
102
00:04:58,145 --> 00:04:59,885
I mean, we don't want
103
00:04:59,885 --> 00:05:02,885
that geometry to glue
with anything else.
104
00:05:02,885 --> 00:05:06,145
I will draw my second rectangle.
105
00:05:06,140 --> 00:05:08,240
I will make a groove again.
106
00:05:08,240 --> 00:05:12,680
Then if I want this rectangle
to be in another layer,
107
00:05:12,680 --> 00:05:16,810
I select the group and I
move it to my desire, duck,
108
00:05:16,805 --> 00:05:19,085
I will repeat the same operation
109
00:05:19,085 --> 00:05:20,915
with this, another entity.
110
00:05:20,915 --> 00:05:25,175
I select it and I move it
to my desired new tag,
111
00:05:25,175 --> 00:05:26,705
this time sitting there,
112
00:05:26,705 --> 00:05:28,385
Let's do it for the last time.
113
00:05:28,385 --> 00:05:30,425
I draw my geometry,
114
00:05:30,425 --> 00:05:35,315
I make a group and I change
the tag this time sphere.
115
00:05:35,315 --> 00:05:39,145
So now what is happening
is that the group,
116
00:05:39,140 --> 00:05:42,530
the box is placed
in my cube duck,
117
00:05:42,530 --> 00:05:45,880
but the interior of the
box, the fried geometry,
118
00:05:45,875 --> 00:05:47,545
as we use to name it,
119
00:05:47,540 --> 00:05:52,120
it is inside this untapped
dark all the time.
120
00:05:52,115 --> 00:05:53,885
That is the reason
because we have
121
00:05:53,885 --> 00:05:56,915
this does line on the edges.
122
00:05:56,915 --> 00:05:58,925
If we wanted to change that,
123
00:05:58,925 --> 00:06:01,175
we should go over here.
124
00:06:01,175 --> 00:06:02,945
One-click default.
125
00:06:02,945 --> 00:06:05,215
So this way I can hide,
126
00:06:05,210 --> 00:06:09,020
for instance, this cube tag
and everything goes normal.
127
00:06:09,020 --> 00:06:13,420
I can hide this cylinder
tag, everything goes normal.
128
00:06:13,415 --> 00:06:16,955
I could hide the
cube and this fear.
129
00:06:16,955 --> 00:06:22,995
Select this rectangle, move
it along the green axis.
130
00:06:22,999 --> 00:06:26,469
And when I unhide
the previous DAX,
131
00:06:26,465 --> 00:06:29,905
my drawing hasn't
changed at all.
132
00:06:29,900 --> 00:06:33,580
It has sent became a mess here.
133
00:06:33,575 --> 00:06:37,745
And I have all the
control of my entities.
134
00:06:37,745 --> 00:06:39,295
So I give you a reminder,
135
00:06:39,290 --> 00:06:41,560
don't change the current duck.
136
00:06:41,555 --> 00:06:42,715
And when you draw,
137
00:06:42,710 --> 00:06:47,480
make groups or components in
order to isolate geometry,
138
00:06:47,480 --> 00:06:49,520
if you don't want that geometry
139
00:06:49,520 --> 00:06:51,010
to glue with something else.
140
00:06:51,005 --> 00:06:54,385
And then afterwards is
the correct moment for
141
00:06:54,380 --> 00:06:56,710
moving the entities to
142
00:06:56,705 --> 00:06:59,225
another layer in
case that you want.
143
00:06:59,225 --> 00:07:01,495
I hope it is clear now,
144
00:07:01,490 --> 00:07:03,520
in case that you have any doubt,
145
00:07:03,515 --> 00:07:05,315
don't hesitate to ask me.
146
00:07:05,315 --> 00:07:07,165
In the next episode,
147
00:07:07,160 --> 00:07:08,900
we will see another tray.
148
00:07:08,900 --> 00:07:14,050
This time, we'll see the tray
goal since this tray here.
149
00:07:14,045 --> 00:07:18,275
So be ready and see you
in the next episode.
10589
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.