Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:01,440
Hello guys and welcome to
2
00:00:01,440 --> 00:00:03,800
this new class in where
we're going to start
3
00:00:03,795 --> 00:00:06,965
a new section where
we will focus on
4
00:00:06,960 --> 00:00:10,440
the different traits
that SketchUp offers us.
5
00:00:10,440 --> 00:00:12,890
Here we can see
the Default tray.
6
00:00:12,885 --> 00:00:14,615
In this Default tray,
7
00:00:14,610 --> 00:00:19,680
we have different traits
depending on your own settings.
8
00:00:19,680 --> 00:00:23,840
I mean, if I go over
window the full tray here,
9
00:00:23,835 --> 00:00:26,655
you can adjust the trace that
10
00:00:26,655 --> 00:00:29,555
will appear here in
your Default tray.
11
00:00:29,550 --> 00:00:33,600
In this class, we'll start
with the entity Info tray.
12
00:00:33,600 --> 00:00:35,490
Actually, we have
been learning about
13
00:00:35,490 --> 00:00:38,620
this tray from almost the
beginning of the course.
14
00:00:38,620 --> 00:00:41,280
In this class, we will review
15
00:00:41,284 --> 00:00:44,124
the different possibilities
that we can find here.
16
00:00:44,120 --> 00:00:46,460
So firstly, it will depend on
17
00:00:46,460 --> 00:00:51,130
the element that we have
selected before, e.g.
18
00:00:51,125 --> 00:00:54,395
here. If I select this element,
19
00:00:54,395 --> 00:00:57,445
then in the entity Info tray,
20
00:00:57,440 --> 00:01:00,820
I can check everything
about this geometry.
21
00:01:00,815 --> 00:01:02,875
First of all, it
is said that it is
22
00:01:02,870 --> 00:01:05,140
a component and it
is set as well,
23
00:01:05,135 --> 00:01:08,015
that we have just one in model.
24
00:01:08,015 --> 00:01:10,075
At the same time,
we can check in
25
00:01:10,070 --> 00:01:12,980
what duck is placed
this element,
26
00:01:12,980 --> 00:01:18,410
we can enter here a name for
this component definition.
27
00:01:18,410 --> 00:01:22,430
And here we have four
different options.
28
00:01:22,429 --> 00:01:26,569
First one will allow us
to hide the component.
29
00:01:26,570 --> 00:01:28,610
If we wanted to unhide it,
30
00:01:28,610 --> 00:01:32,480
we should go over
edit and height last,
31
00:01:32,480 --> 00:01:34,450
as we usually do.
32
00:01:34,445 --> 00:01:36,715
We can lock this
component as well.
33
00:01:36,710 --> 00:01:38,710
Then the color becomes read.
34
00:01:38,705 --> 00:01:41,605
This lock option is
the same as if I
35
00:01:41,600 --> 00:01:44,690
click the right button,
lock or unlock.
36
00:01:44,690 --> 00:01:47,900
And then we have this last
two options which are
37
00:01:47,900 --> 00:01:52,270
related with another
tray called saddles.
38
00:01:52,265 --> 00:01:55,595
This santos tray, we will learn
39
00:01:55,595 --> 00:01:59,215
about the south Australia
in a specific episode.
40
00:01:59,210 --> 00:02:00,950
So this is not the
correct moment
41
00:02:00,950 --> 00:02:03,410
for talking about
these two options.
42
00:02:03,410 --> 00:02:07,580
However, if we select a line
instead of a component,
43
00:02:07,580 --> 00:02:09,880
the entity Info
will be different.
44
00:02:09,875 --> 00:02:12,095
We can change that here easily,
45
00:02:12,095 --> 00:02:15,785
take into account that we have
another tray called docs.
46
00:02:15,785 --> 00:02:19,525
There will be another
specific episode about that.
47
00:02:19,520 --> 00:02:23,140
Now we have just one
tag called an dark.
48
00:02:23,135 --> 00:02:25,885
So here there are
no more options.
49
00:02:25,880 --> 00:02:28,210
We have the length of that line,
50
00:02:28,205 --> 00:02:29,365
which could be very,
51
00:02:29,360 --> 00:02:33,680
very useful and we can soft
or smooth that line we
52
00:02:33,680 --> 00:02:35,530
did on a specific class about
53
00:02:35,525 --> 00:02:38,165
these options so we
know how to use it.
54
00:02:38,165 --> 00:02:41,725
And then in these toggles
option, we can hide,
55
00:02:41,720 --> 00:02:43,790
but we can't look,
56
00:02:43,790 --> 00:02:48,330
we can't use this third option
about receives settles.
57
00:02:48,325 --> 00:02:50,065
We can use the fourth one.
58
00:02:50,060 --> 00:02:52,670
This is because of the
nature of this entity.
59
00:02:52,670 --> 00:02:53,570
It is aligned.
60
00:02:53,570 --> 00:02:56,230
And then we have some
options available,
61
00:02:56,225 --> 00:02:58,105
but not all of them.
62
00:02:58,100 --> 00:03:00,730
If I move on to the next entity
63
00:03:00,725 --> 00:03:02,815
or surface, and I select it.
64
00:03:02,810 --> 00:03:05,650
And then we can take here
that we have two colors.
65
00:03:05,645 --> 00:03:08,395
These two colors
are talking about
66
00:03:08,390 --> 00:03:11,440
the front color and
the color of the face.
67
00:03:11,435 --> 00:03:14,045
If those colors are
the default colors,
68
00:03:14,045 --> 00:03:16,505
then here we don't
have any difference.
69
00:03:16,504 --> 00:03:18,754
But if I apply e.g.
70
00:03:18,755 --> 00:03:20,965
this pink here,
you will see that
71
00:03:20,960 --> 00:03:24,550
this first thumbnail is
talking about the front color.
72
00:03:24,545 --> 00:03:28,105
This second thumbnail is
talking about the back color.
73
00:03:28,100 --> 00:03:31,070
Apart of that, it is
remarkable that here we
74
00:03:31,070 --> 00:03:34,270
can measure the area
of that surface.
75
00:03:34,265 --> 00:03:36,725
This piece of information
could be very,
76
00:03:36,725 --> 00:03:39,895
very interesting if we need e.g.
77
00:03:39,890 --> 00:03:44,020
to have specific data
about our projects.
78
00:03:44,015 --> 00:03:45,995
Again, hearing the
toggles option,
79
00:03:45,995 --> 00:03:48,805
we have some features available,
80
00:03:48,800 --> 00:03:50,440
but not all of them.
81
00:03:50,435 --> 00:03:53,275
We can't e.g. look a surface.
82
00:03:53,270 --> 00:03:55,580
Next entity here is a cycle.
83
00:03:55,580 --> 00:03:56,320
Looked at.
84
00:03:56,315 --> 00:03:58,265
This text is just
85
00:03:58,265 --> 00:04:00,565
in the middle of the
screen. I will delete it.
86
00:04:00,560 --> 00:04:02,150
It was placed apart,
87
00:04:02,150 --> 00:04:04,220
but as it moves
through the camera,
88
00:04:04,220 --> 00:04:07,730
it became a little
bit annoying cycle.
89
00:04:07,730 --> 00:04:09,740
The good thing
about this is that
90
00:04:09,740 --> 00:04:11,710
once the circle is drawn,
91
00:04:11,705 --> 00:04:15,385
we can change the
radius, let's say three.
92
00:04:15,380 --> 00:04:17,210
And we can change the number of
93
00:04:17,210 --> 00:04:20,080
segments of that conference.
94
00:04:20,075 --> 00:04:24,115
We can know that it can have
a very polygonal aspect.
95
00:04:24,110 --> 00:04:28,100
So usually will need to increase
the number of segments.
96
00:04:28,100 --> 00:04:31,790
If we forgot to do it
before, draw the cycle,
97
00:04:31,790 --> 00:04:34,760
we can do it
afterwards from here,
98
00:04:34,760 --> 00:04:37,550
let's say 100, enter this.
99
00:04:37,550 --> 00:04:39,050
Another option is talking about
100
00:04:39,050 --> 00:04:40,970
the length of that
side conference.
101
00:04:40,969 --> 00:04:42,429
It can be useful as well.
102
00:04:42,425 --> 00:04:45,575
And the same story
with the, here,
103
00:04:45,575 --> 00:04:48,595
I select this arc and
then we can change
104
00:04:48,590 --> 00:04:50,870
the radius segments and we
105
00:04:50,870 --> 00:04:53,650
have the length
of that arc here.
106
00:04:53,645 --> 00:04:57,355
Let's go with another
entity as a group.
107
00:04:57,350 --> 00:04:59,420
If I select a group box,
108
00:04:59,420 --> 00:05:03,160
then here we can read
solid group one in model,
109
00:05:03,155 --> 00:05:06,535
we have the duck, we can
enter a name for that group.
110
00:05:06,530 --> 00:05:08,920
This another option is
not very interesting,
111
00:05:08,915 --> 00:05:10,675
but look at this volume.
112
00:05:10,670 --> 00:05:14,570
We can measure the
volume of our 3D model.
113
00:05:14,570 --> 00:05:16,490
We'll need to make
a group and then
114
00:05:16,490 --> 00:05:19,450
just select it and go to entity.
115
00:05:19,445 --> 00:05:21,605
Then in toggles option,
116
00:05:21,605 --> 00:05:24,155
we have all the
features available.
117
00:05:24,155 --> 00:05:26,705
If we explored the group.
118
00:05:26,705 --> 00:05:29,975
Here, we'll find a
completely different aspect
119
00:05:29,975 --> 00:05:32,245
of this entity Info tray.
120
00:05:32,240 --> 00:05:35,610
It is said that we have
18 entity selected.
121
00:05:35,614 --> 00:05:37,614
We have lines and surfaces.
122
00:05:37,610 --> 00:05:40,100
We can just hide or unhide
123
00:05:40,100 --> 00:05:43,360
and change the dark in case
that we want to do it.
124
00:05:43,355 --> 00:05:46,475
Finally, we can use as
well the entity Info
125
00:05:46,475 --> 00:05:49,685
for editing our dimensions.
126
00:05:49,685 --> 00:05:51,415
We can change the color,
127
00:05:51,410 --> 00:05:53,120
the dark, the font.
128
00:05:53,120 --> 00:05:54,790
And if we expand this,
129
00:05:54,785 --> 00:05:58,585
Advanced attributes will
find here more options.
130
00:05:58,580 --> 00:06:01,180
We can change the
texts from here and
131
00:06:01,175 --> 00:06:04,385
even the alignment if
we have addressed,
132
00:06:04,385 --> 00:06:08,825
let's say text, enter
and we select it,
133
00:06:08,825 --> 00:06:11,075
go to Entity Info again.
134
00:06:11,075 --> 00:06:13,655
Here we'll find
different options
135
00:06:13,655 --> 00:06:15,995
in order to edit that text.
136
00:06:15,995 --> 00:06:20,215
As you can see, this tray
is super, super handy.
137
00:06:20,210 --> 00:06:24,680
I recommend you to use it
in a very regular basis.
138
00:06:24,679 --> 00:06:26,119
So don't forget about it
139
00:06:26,120 --> 00:06:28,220
when you are drawing
in SketchUp.
140
00:06:28,220 --> 00:06:30,770
I hope that you like the class.
141
00:06:30,770 --> 00:06:32,780
And in the next episode,
142
00:06:32,779 --> 00:06:37,339
we'll go to another different
tre, call materials.
143
00:06:37,340 --> 00:06:41,530
It is one of the most
important and dense ones here.
144
00:06:41,525 --> 00:06:45,725
So maybe I will have to split
that class into two parts.
145
00:06:45,725 --> 00:06:50,105
So we're ready and see
you in the next class.
10427
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.