Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:02,070
Hello people and welcome
to this new class.
2
00:00:02,070 --> 00:00:05,010
In where we're going to
see the offset tool.
3
00:00:05,010 --> 00:00:08,460
We will find this tool
here under this icon and
4
00:00:08,460 --> 00:00:12,630
the description says offset
selected edges in a plane.
5
00:00:12,630 --> 00:00:13,790
Let's see how it works.
6
00:00:13,785 --> 00:00:16,035
It is a pretty
straightforward tool,
7
00:00:16,035 --> 00:00:18,485
but it has some
different features and
8
00:00:18,480 --> 00:00:21,000
functions that it is
convenient to know.
9
00:00:21,000 --> 00:00:24,060
Let's start with
this square in 2D.
10
00:00:24,060 --> 00:00:27,500
And as it happens with a
lot of tools in SketchUp,
11
00:00:27,495 --> 00:00:30,665
you can pre-select geometry
or you can actively
12
00:00:30,660 --> 00:00:34,290
hover over the geometry
and choose it for offset.
13
00:00:34,285 --> 00:00:37,435
Let's start with this
second option, letter F.
14
00:00:37,430 --> 00:00:39,650
For the shortcut,
we hit the tool and
15
00:00:39,650 --> 00:00:42,320
then if I hover
over the geometry,
16
00:00:42,320 --> 00:00:44,840
we can see how this
face lights up.
17
00:00:44,840 --> 00:00:47,330
And at the same
time, one red spot
18
00:00:47,330 --> 00:00:50,810
appear on the edge of
our surface, right?
19
00:00:50,810 --> 00:00:55,760
That red spot is kind of
reference for our offset.
20
00:00:55,760 --> 00:00:57,530
So one-click e.g.
21
00:00:57,530 --> 00:01:00,880
here, and then you can see how
this tool is going to pull
22
00:01:00,875 --> 00:01:04,345
out an outline of the
face I have on here.
23
00:01:04,340 --> 00:01:06,800
We can create a
negative offset when we
24
00:01:06,800 --> 00:01:09,440
are like pulling that
offset into the phase
25
00:01:09,440 --> 00:01:10,780
where we can create
26
00:01:10,775 --> 00:01:12,955
a positive offset if we move
27
00:01:12,950 --> 00:01:15,220
the mouse outside of the face.
28
00:01:15,215 --> 00:01:18,125
Furthermore, like a lot of
other tools in SketchUp,
29
00:01:18,125 --> 00:01:21,955
you can type in an exact
measure in the measurement bar,
30
00:01:21,950 --> 00:01:26,410
Let's say e.g. 0.5 m Enter.
31
00:01:26,405 --> 00:01:28,055
Here we have the result.
32
00:01:28,055 --> 00:01:30,005
We have this new perimeter at
33
00:01:30,005 --> 00:01:33,535
that exact distance
from the original one.
34
00:01:33,530 --> 00:01:38,170
And a SketchUp creates as well
the surface in this area,
35
00:01:38,165 --> 00:01:40,895
as it happens with
a boost pool tool.
36
00:01:40,895 --> 00:01:44,285
If I hover over this new phase
and I click twice rapidly,
37
00:01:44,285 --> 00:01:47,405
we will repeat the same
command at the same distance,
38
00:01:47,405 --> 00:01:50,515
and we could do it
over and over again.
39
00:01:50,510 --> 00:01:54,490
However, we can work not
just with the surfaces,
40
00:01:54,485 --> 00:01:56,065
but with the edges.
41
00:01:56,060 --> 00:01:59,260
This time, instead of
hover over our surface,
42
00:01:59,255 --> 00:02:03,665
I will pre-select the
geometry one and second ads.
43
00:02:03,665 --> 00:02:06,635
Then I go over offset,
one-click here,
44
00:02:06,635 --> 00:02:09,565
that red point
will pop up and we
45
00:02:09,560 --> 00:02:13,550
can exactly says where we
want that reference to be.
46
00:02:13,550 --> 00:02:15,230
Let's say here, one-click,
47
00:02:15,230 --> 00:02:16,450
then we move the mouse.
48
00:02:16,445 --> 00:02:18,035
You can see how we are
49
00:02:18,035 --> 00:02:21,365
creating that offset
of those two lines.
50
00:02:21,365 --> 00:02:22,985
That could be very useful.
51
00:02:22,985 --> 00:02:24,925
We can again type in
52
00:02:24,920 --> 00:02:26,840
the exact measure or doing
53
00:02:26,840 --> 00:02:29,320
graphically just
by another click.
54
00:02:29,315 --> 00:02:32,185
Take into account that
this tool will not
55
00:02:32,180 --> 00:02:35,560
work if we try to
offset just one.
56
00:02:35,555 --> 00:02:38,255
Let's check it here in
this another example,
57
00:02:38,254 --> 00:02:41,944
I will select this
line letter F,
58
00:02:41,945 --> 00:02:43,855
and then the tool
doesn't allow me
59
00:02:43,850 --> 00:02:45,850
to continue with the offset.
60
00:02:45,845 --> 00:02:49,775
I have to select at least
two SDS, Then letter F.
61
00:02:49,775 --> 00:02:53,915
And this time I can use the
tool without any problem.
62
00:02:53,915 --> 00:02:55,645
Of course I could use it as
63
00:02:55,640 --> 00:02:57,820
well with more than two edges.
64
00:02:57,815 --> 00:03:00,755
Let's select everything
here, letter S.
65
00:03:00,755 --> 00:03:02,725
Now I have two precise where I
66
00:03:02,720 --> 00:03:05,870
want to be that red
point here, e.g.
67
00:03:05,870 --> 00:03:09,500
I. Move my mouse and let's
type in how long we want
68
00:03:09,500 --> 00:03:14,480
to pull out that new
outline, e.g. 0.5.
69
00:03:14,480 --> 00:03:17,440
Let's jump now into a 3D model.
70
00:03:17,435 --> 00:03:18,725
As I told you before,
71
00:03:18,725 --> 00:03:20,485
this is a 2D tool.
72
00:03:20,480 --> 00:03:23,560
You can use it just in
one plane at a time.
73
00:03:23,555 --> 00:03:26,365
So in this case, if I
hit the tool letter F
74
00:03:26,360 --> 00:03:29,690
and I hover over this
phase, one-click e.g.
75
00:03:29,689 --> 00:03:31,369
here, then I move the mouse.
76
00:03:31,370 --> 00:03:33,710
I will be able to work just
77
00:03:33,710 --> 00:03:36,280
in this surface
as we saw before,
78
00:03:36,275 --> 00:03:39,815
this offset can be
negative or positive.
79
00:03:39,815 --> 00:03:42,065
This time, I will
pull this offset
80
00:03:42,065 --> 00:03:45,005
into the face to create
a kind of frame.
81
00:03:45,005 --> 00:03:46,765
And then I could use
82
00:03:46,760 --> 00:03:49,960
these postpone tool in
order to create a whole,
83
00:03:49,955 --> 00:03:52,145
the combination of
these two tools,
84
00:03:52,145 --> 00:03:53,455
they postpone tool and
85
00:03:53,450 --> 00:03:56,440
the offset tool is
very, very powerful.
86
00:03:56,435 --> 00:03:59,575
Remember that when you
are working in SketchUp,
87
00:03:59,570 --> 00:04:03,170
the normal geometry and
the hidden geometry.
88
00:04:03,170 --> 00:04:06,010
If I go to View Hidden geometry,
89
00:04:06,005 --> 00:04:09,055
we could even use this
offset tool taking
90
00:04:09,050 --> 00:04:12,920
that hidden geometry
as a reference, e.g.
91
00:04:12,920 --> 00:04:15,080
here, I will hit the tool again.
92
00:04:15,080 --> 00:04:17,170
And as you can check
here on the screen,
93
00:04:17,165 --> 00:04:19,355
when I hover over these faces,
94
00:04:19,355 --> 00:04:22,445
the tool is recognizing
the LTS as the perimeter,
95
00:04:22,445 --> 00:04:26,195
even when that edges are
part of hidden geometry,
96
00:04:26,195 --> 00:04:28,175
one-click and I move the mouse
97
00:04:28,175 --> 00:04:30,445
and I could create this frame,
98
00:04:30,440 --> 00:04:33,070
which maybe I could
repeat by clicking
99
00:04:33,065 --> 00:04:36,355
twice on every side
of this cylinder.
100
00:04:36,350 --> 00:04:38,300
Then using the push-pull tool,
101
00:04:38,300 --> 00:04:40,960
I could create unique sex
102
00:04:40,955 --> 00:04:44,005
like this one you are
watching right now.
103
00:04:44,000 --> 00:04:46,930
Finally, this tool
has another feature.
104
00:04:46,925 --> 00:04:51,305
If we focus on these strange
shape and we make an offset,
105
00:04:51,305 --> 00:04:55,435
I hit the tool, I hover over
the surface which slides up,
106
00:04:55,430 --> 00:04:57,730
then one click and
I move my mouse,
107
00:04:57,725 --> 00:04:59,905
you will see how depending on
108
00:04:59,900 --> 00:05:02,390
the distance with
the outer line,
109
00:05:02,390 --> 00:05:05,090
different saves with
appeared and when they
110
00:05:05,090 --> 00:05:07,940
are very close to each
other, in one point,
111
00:05:07,940 --> 00:05:09,460
they will merge and
112
00:05:09,455 --> 00:05:11,705
a continuous figure will
113
00:05:11,705 --> 00:05:13,655
appear right here
we are working,
114
00:05:13,655 --> 00:05:16,115
let's say with a normal
mode of the two,
115
00:05:16,115 --> 00:05:18,355
but we can toggle
it to another mode,
116
00:05:18,350 --> 00:05:20,840
tapping Alt key in your Windows,
117
00:05:20,840 --> 00:05:25,580
then a new icon will appear
next to our offset symbol.
118
00:05:25,580 --> 00:05:28,180
And now block that
if I move my mouse,
119
00:05:28,175 --> 00:05:31,145
these two figures will
lap over each other,
120
00:05:31,145 --> 00:05:33,335
creating a unique shape.
121
00:05:33,335 --> 00:05:36,565
It is not something super
relevant in my opinion,
122
00:05:36,560 --> 00:05:39,730
but I would like you to know
because the tool has this,
123
00:05:39,725 --> 00:05:42,425
another possibility,
another click here,
124
00:05:42,425 --> 00:05:43,585
and we are done.
125
00:05:43,580 --> 00:05:45,880
Maybe now we can put pool
126
00:05:45,875 --> 00:05:48,635
these new saves
creating this figure.
127
00:05:48,635 --> 00:05:50,395
So this is all about this tool.
128
00:05:50,390 --> 00:05:54,400
It is a very straightforward
tool you see useful.
129
00:05:54,395 --> 00:05:56,305
And in the next episode,
130
00:05:56,300 --> 00:06:00,760
we'll learn about how to work
in SketchUp with solids.
131
00:06:00,755 --> 00:06:04,495
We will have to switch on a
new toolbar going up here,
132
00:06:04,490 --> 00:06:07,540
right bottom and solid
tools, one-click.
133
00:06:07,535 --> 00:06:10,135
These new toolbar will
appear solid tools.
134
00:06:10,130 --> 00:06:11,360
And thanks to it,
135
00:06:11,360 --> 00:06:14,240
our geometry will work not
136
00:06:14,240 --> 00:06:17,890
as different surfaces
connected altogether,
137
00:06:17,885 --> 00:06:19,715
but as solid objects,
138
00:06:19,715 --> 00:06:22,405
which will open us a
lot of possibilities
139
00:06:22,400 --> 00:06:25,120
to draw new kind of geometries,
140
00:06:25,115 --> 00:06:27,875
impossible to get without it.
10228
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.