Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:01,410
Hello guys. And we'll go into
2
00:00:01,410 --> 00:00:03,240
this new class where we will
3
00:00:03,240 --> 00:00:06,840
see specific to
call preferences.
4
00:00:06,840 --> 00:00:11,380
We will find it if we move
over Window Preferences.
5
00:00:11,384 --> 00:00:12,824
One click on here,
6
00:00:12,825 --> 00:00:15,485
and then this window pops up in
7
00:00:15,480 --> 00:00:18,180
where we find different options.
8
00:00:18,180 --> 00:00:19,350
As you can see here,
9
00:00:19,350 --> 00:00:22,220
we have a list of
different categories.
10
00:00:22,215 --> 00:00:24,425
Now, template is marked,
11
00:00:24,420 --> 00:00:26,990
but if we start
from the beginning
12
00:00:26,985 --> 00:00:29,795
and we select accessibility from
13
00:00:29,790 --> 00:00:33,830
this menu will be able to
change the default colors
14
00:00:33,825 --> 00:00:35,825
used by a SketchUp in
15
00:00:35,820 --> 00:00:38,550
order to represent
different things.
16
00:00:38,545 --> 00:00:41,125
The red axis, the green axis,
17
00:00:41,120 --> 00:00:42,370
or the blue axis.
18
00:00:42,365 --> 00:00:45,275
We are talking about
this general axis,
19
00:00:45,275 --> 00:00:48,595
which actually is super
important because it will
20
00:00:48,590 --> 00:00:52,480
be our main reference all
the time in Scripture.
21
00:00:52,475 --> 00:00:55,805
So we can change the colors
of this general axes.
22
00:00:55,805 --> 00:00:59,305
We can change other colors
as the parallel and
23
00:00:59,300 --> 00:01:03,290
perpendicular lines or
even the tangent lines.
24
00:01:03,290 --> 00:01:06,020
In case that we don't want
to apply those changes,
25
00:01:06,020 --> 00:01:09,620
we can reset all the
next three options.
26
00:01:09,620 --> 00:01:13,280
Applications, compatibility
and rowing, in my opinion,
27
00:01:13,280 --> 00:01:15,170
are not very important
28
00:01:15,170 --> 00:01:17,950
because the default
settings are quite good.
29
00:01:17,945 --> 00:01:19,915
But taking mine that you can
30
00:01:19,910 --> 00:01:22,420
change the default image editor.
31
00:01:22,415 --> 00:01:24,295
You can say it e.g. as well,
32
00:01:24,290 --> 00:01:27,320
the mouse wheel
style and inverted.
33
00:01:27,320 --> 00:01:29,990
You can play with a
clicker style and
34
00:01:29,990 --> 00:01:32,900
some different
options as this one
35
00:01:32,900 --> 00:01:35,870
called Disabled pick
on push-pull tool.
36
00:01:35,870 --> 00:01:37,990
You would understand it when we
37
00:01:37,985 --> 00:01:40,195
arrive to this tool, push pull.
38
00:01:40,190 --> 00:01:41,900
But as I told you before,
39
00:01:41,900 --> 00:01:44,230
the settings are
already quite good.
40
00:01:44,225 --> 00:01:47,615
So we can jump to the
next option called files.
41
00:01:47,615 --> 00:01:49,685
Here we can read file location.
42
00:01:49,685 --> 00:01:52,375
So this menu is quite
good because we
43
00:01:52,370 --> 00:01:55,150
can easily know
where it's placed.
44
00:01:55,145 --> 00:01:57,145
Everything in a
sketch, the models,
45
00:01:57,140 --> 00:01:58,700
the components, the materials,
46
00:01:58,700 --> 00:02:00,230
the styles, the texture,
47
00:02:00,230 --> 00:02:02,330
images, the watermarked images,
48
00:02:02,330 --> 00:02:05,730
the export, the classifications,
and the templates.
49
00:02:05,734 --> 00:02:10,174
We can even change that
file location preference,
50
00:02:10,175 --> 00:02:12,065
or we can open that
51
00:02:12,065 --> 00:02:15,875
a specific folder and then use
that file for any purpose.
52
00:02:15,875 --> 00:02:18,365
The next option is
called generalise.
53
00:02:18,365 --> 00:02:20,075
This first category is saving
54
00:02:20,075 --> 00:02:21,835
is quite important because he's
55
00:02:21,830 --> 00:02:25,700
talking about the backups of
our files and the autosave,
56
00:02:25,700 --> 00:02:29,270
I recommend you to set the
auto save every 5 min.
57
00:02:29,270 --> 00:02:32,130
So in case that you're
a SketchUp crust,
58
00:02:32,134 --> 00:02:34,464
you would be able to
recover your file
59
00:02:34,460 --> 00:02:37,120
and you just lose 5 min of work.
60
00:02:37,115 --> 00:02:39,625
Here, I would like
to make a break.
61
00:02:39,620 --> 00:02:42,710
Let's focus now on this
folder in where we
62
00:02:42,710 --> 00:02:45,770
can find these two
different files.
63
00:02:45,770 --> 00:02:48,050
One is an a SketchUp file,
64
00:02:48,050 --> 00:02:52,930
which means that the extension
or the format is S k,
65
00:02:52,925 --> 00:02:54,925
p. And the other one has an,
66
00:02:54,920 --> 00:02:57,770
a strange extension as it is,
67
00:02:57,770 --> 00:03:02,030
S k be this S KB is the backup.
68
00:03:02,030 --> 00:03:04,240
As far as in our preferences.
69
00:03:04,235 --> 00:03:06,295
We said that we want to make
70
00:03:06,290 --> 00:03:08,590
an auto save every five-minutes.
71
00:03:08,585 --> 00:03:12,865
These both files are gonna
be saved every 5 min.
72
00:03:12,860 --> 00:03:15,500
And as far as we said in
73
00:03:15,500 --> 00:03:19,520
our preferences that we
want to create a backup,
74
00:03:19,520 --> 00:03:23,900
then we will always have
this strange file with
75
00:03:23,900 --> 00:03:26,570
this strange extension as
76
00:03:26,570 --> 00:03:30,260
KB as a backup of
our SketchUp file.
77
00:03:30,260 --> 00:03:33,310
In case that we lost this file,
78
00:03:33,305 --> 00:03:38,975
we can always recover our
information using the backup.
79
00:03:38,975 --> 00:03:41,365
We should select
it right button,
80
00:03:41,360 --> 00:03:44,050
go to Properties and then change
81
00:03:44,045 --> 00:03:48,745
that strange extension
and type in S, k,
82
00:03:48,740 --> 00:03:50,500
p, SketchUp,
83
00:03:50,495 --> 00:03:52,225
extensive change the name
84
00:03:52,220 --> 00:03:54,230
of the file in
order to don't have
85
00:03:54,230 --> 00:03:56,950
both files duplicate
it because then
86
00:03:56,945 --> 00:04:00,545
we will receive an
error and say accept.
87
00:04:00,545 --> 00:04:04,795
This window is asking us if
we are sure, we say yes.
88
00:04:04,790 --> 00:04:07,090
And then this backup is now
89
00:04:07,085 --> 00:04:09,685
available to be
used in SketchUp.
90
00:04:09,680 --> 00:04:12,410
The rest of the options
are not important.
91
00:04:12,410 --> 00:04:15,700
So let's go to the
next one, open D L.
92
00:04:15,695 --> 00:04:18,655
Here we are talking
about our graphic card.
93
00:04:18,650 --> 00:04:21,710
From here, we can adjust
this multi-sample
94
00:04:21,710 --> 00:04:23,390
anti-aliasing in order to
95
00:04:23,390 --> 00:04:26,000
avoid our image to be pixelated,
96
00:04:26,000 --> 00:04:27,550
this value is okay,
97
00:04:27,545 --> 00:04:31,805
and we can take the properties
of our graphic card.
98
00:04:31,805 --> 00:04:34,825
The next option called
shortcuts is one of
99
00:04:34,820 --> 00:04:37,880
the most important things
that we can set from here,
100
00:04:37,880 --> 00:04:40,840
we will learn how to do
it in a specific episode,
101
00:04:40,835 --> 00:04:42,065
because thanks to it,
102
00:04:42,065 --> 00:04:44,575
we will have a much
more better workflow.
103
00:04:44,570 --> 00:04:47,140
This template option is talking
104
00:04:47,135 --> 00:04:50,485
about the thing that we saw
in the previous episode.
105
00:04:50,480 --> 00:04:52,490
Templates. Here we will find
106
00:04:52,490 --> 00:04:55,460
the same templates as
in the word compete.
107
00:04:55,460 --> 00:04:59,530
But look because if I
select this template, e.g.
108
00:04:59,525 --> 00:05:01,675
this plan view and I click,
109
00:05:01,670 --> 00:05:04,660
Okay, my file is not
changing at all,
110
00:05:04,655 --> 00:05:08,345
just in case that I
go over File New,
111
00:05:08,345 --> 00:05:11,275
then the new file is going
to use that template.
112
00:05:11,270 --> 00:05:14,140
So again, Window Preferences.
113
00:05:14,135 --> 00:05:17,495
Let's go to the last
option workspace.
114
00:05:17,495 --> 00:05:21,085
Here we can change the
size of our main toolbar.
115
00:05:21,080 --> 00:05:23,440
I'm talking about
this one placed
116
00:05:23,435 --> 00:05:25,835
on the left side of our screen.
117
00:05:25,835 --> 00:05:28,375
So if I unclick this option
118
00:05:28,370 --> 00:05:31,240
called use large two
buttons and I say,
119
00:05:31,235 --> 00:05:32,665
Okay, you can check how
120
00:05:32,660 --> 00:05:35,020
this toolbar now
is smaller, right?
121
00:05:35,015 --> 00:05:38,675
So it is better to don't
unclick this Upsilon.
122
00:05:38,675 --> 00:05:42,355
And finally, thanks to
this reset workspace,
123
00:05:42,350 --> 00:05:45,320
we will undo all
the changes that we
124
00:05:45,320 --> 00:05:48,700
previously had done
in our interface.
125
00:05:48,695 --> 00:05:54,175
Imagine e.g. that I decide
to close these Default tray.
126
00:05:54,170 --> 00:05:56,990
If I go over Window Preferences,
127
00:05:56,990 --> 00:06:00,340
work space, and I
click Reset Workspace,
128
00:06:00,335 --> 00:06:03,145
that Default tray appears again,
129
00:06:03,140 --> 00:06:07,480
and my interface will be
again as it comes by default,
130
00:06:07,475 --> 00:06:10,715
I will lose all the
settings made by myself.
131
00:06:10,715 --> 00:06:12,605
So once we have an overview
132
00:06:12,605 --> 00:06:15,155
about these preferences panel,
133
00:06:15,155 --> 00:06:16,985
is time to say goodbye.
134
00:06:16,985 --> 00:06:18,815
And in the next episode,
135
00:06:18,815 --> 00:06:21,125
we will see another
important window,
136
00:06:21,125 --> 00:06:25,385
as it is, the model info window.
9779
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.