Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:01:37,280 --> 00:01:40,079
hey guys welcome to the stream all right
2
00:01:40,079 --> 00:01:42,400
we are gonna play with a new toy tonight
3
00:01:42,400 --> 00:01:45,520
so we're going from 3d printer to laser
4
00:01:45,520 --> 00:01:48,000
engraving machine so
5
00:01:48,000 --> 00:01:50,479
i'm kind of curious to what trouble
6
00:01:50,479 --> 00:01:53,040
we'll get in tonight in all honesty i
7
00:01:53,040 --> 00:01:55,119
doubt i'm going to fire it up tonight
8
00:01:55,119 --> 00:01:56,240
but
9
00:01:56,240 --> 00:01:57,439
we're definitely going to put it
10
00:01:57,439 --> 00:01:58,640
together
11
00:01:58,640 --> 00:02:02,000
this is the wanalux jl7
12
00:02:02,000 --> 00:02:04,399
so pretty neat machine
13
00:02:04,399 --> 00:02:06,159
uh
14
00:02:06,159 --> 00:02:08,080
have not had experience with these i'm
15
00:02:08,080 --> 00:02:10,319
kind of curious to play with it
16
00:02:10,319 --> 00:02:12,800
and uh you know kind of just have a good
17
00:02:12,800 --> 00:02:14,959
time put it together see what all the
18
00:02:14,959 --> 00:02:16,640
bits and pieces are
19
00:02:16,640 --> 00:02:18,720
and kind of just
20
00:02:18,720 --> 00:02:20,400
take a look at the machine so this was
21
00:02:20,400 --> 00:02:22,319
sponsored by them this is they sent me
22
00:02:22,319 --> 00:02:23,520
the machine
23
00:02:23,520 --> 00:02:25,120
for the video and stream that we're
24
00:02:25,120 --> 00:02:26,560
gonna see
25
00:02:26,560 --> 00:02:27,840
so
26
00:02:27,840 --> 00:02:29,040
let's start getting this thing out of
27
00:02:29,040 --> 00:02:35,350
the box and start having some fun
28
00:02:35,360 --> 00:02:37,760
so opening up the box
29
00:02:37,760 --> 00:02:40,080
there are some cardboard pieces they
30
00:02:40,080 --> 00:02:41,840
sent a piece of wood
31
00:02:41,840 --> 00:02:43,840
for the test model
32
00:02:43,840 --> 00:02:44,720
so
33
00:02:44,720 --> 00:02:47,040
we'll set those off to the side here so
34
00:02:47,040 --> 00:02:48,560
we start to kind of dig in and take a
35
00:02:48,560 --> 00:02:52,160
look at what else is in the box so foam
36
00:02:52,160 --> 00:02:53,840
you guys know what i say about this foam
37
00:02:53,840 --> 00:02:55,280
it's handy to keep around you can do
38
00:02:55,280 --> 00:02:57,040
modeling with it all kinds of fun stuff
39
00:02:57,040 --> 00:03:00,640
so definitely something to keep in mind
40
00:03:00,640 --> 00:03:02,239
all right
41
00:03:02,239 --> 00:03:03,360
so
42
00:03:03,360 --> 00:03:05,760
first thing i'm gonna go for
43
00:03:05,760 --> 00:03:08,400
that's the laser itself right there so
44
00:03:08,400 --> 00:03:10,000
we've got the laser
45
00:03:10,000 --> 00:03:12,239
nice crinkly bag
46
00:03:12,239 --> 00:03:14,879
it's got a nice fan on it
47
00:03:14,879 --> 00:03:17,360
let's go ahead and hear that
48
00:03:17,360 --> 00:03:20,879
so there's the visible laser so avoid
49
00:03:20,879 --> 00:03:22,560
direct exposure to eyes yeah we're going
50
00:03:22,560 --> 00:03:24,640
to do that but we can kind of take a
51
00:03:24,640 --> 00:03:26,720
look around with it a little bit
52
00:03:26,720 --> 00:03:28,640
to kind of get a feel of what we're
53
00:03:28,640 --> 00:03:30,319
dealing with here
54
00:03:30,319 --> 00:03:33,120
so definitely pretty look to it so i'm
55
00:03:33,120 --> 00:03:34,720
going to set that gently off to the side
56
00:03:34,720 --> 00:03:38,470
here
57
00:03:38,480 --> 00:03:40,560
here's the safety glasses
58
00:03:40,560 --> 00:03:52,390
let's take those out and take a look
59
00:03:52,400 --> 00:03:54,959
all right so we've got the nice green
60
00:03:54,959 --> 00:03:56,560
tint
61
00:03:56,560 --> 00:03:58,560
i know this camera is not really showing
62
00:03:58,560 --> 00:04:01,360
it very well but it is the green tinted
63
00:04:01,360 --> 00:04:02,640
safety glasses you can kind of get a
64
00:04:02,640 --> 00:04:04,560
view of it there looking over the white
65
00:04:04,560 --> 00:04:06,239
however this camera you guys can
66
00:04:06,239 --> 00:04:08,560
definitely get a view of it so
67
00:04:08,560 --> 00:04:10,720
set those off to the side let's take a
68
00:04:10,720 --> 00:04:12,720
look at this box i have a feeling this
69
00:04:12,720 --> 00:04:15,120
is our bits box
70
00:04:15,120 --> 00:04:16,799
with all of our
71
00:04:16,799 --> 00:04:25,350
screws and whatnot probably
72
00:04:25,360 --> 00:04:27,199
yep we got a cleaning brush looks like a
73
00:04:27,199 --> 00:04:28,479
usb cable
74
00:04:28,479 --> 00:04:30,000
thumb drive
75
00:04:30,000 --> 00:04:32,479
some zip ties some bolts so we'll dig
76
00:04:32,479 --> 00:04:33,840
into that here
77
00:04:33,840 --> 00:04:36,390
shortly
78
00:04:36,400 --> 00:04:40,560
we got the all-important power cord
79
00:04:40,560 --> 00:04:42,880
so that's usa standard
80
00:04:42,880 --> 00:04:45,280
and we got a nice ac adapter all right
81
00:04:45,280 --> 00:04:47,199
so i'm gonna set that over here
82
00:04:47,199 --> 00:04:48,400
out of the way
83
00:04:48,400 --> 00:04:50,160
we'll get rid of that box now we're
84
00:04:50,160 --> 00:04:52,160
getting actually into the actual machine
85
00:04:52,160 --> 00:04:54,400
itself
86
00:04:54,400 --> 00:04:55,280
so
87
00:04:55,280 --> 00:04:57,759
very nice very smooth metal
88
00:04:57,759 --> 00:04:59,199
um
89
00:04:59,199 --> 00:05:01,040
i like that there's a lot of grooves to
90
00:05:01,040 --> 00:05:03,520
intersect with this looks like the main
91
00:05:03,520 --> 00:05:05,040
rolling piece where the laser is going
92
00:05:05,040 --> 00:05:06,080
to roll
93
00:05:06,080 --> 00:05:08,560
so we got a nice stepper motor that's a
94
00:05:08,560 --> 00:05:10,240
higher quality one than what i usually
95
00:05:10,240 --> 00:05:12,320
see so that's definitely good the belt
96
00:05:12,320 --> 00:05:14,240
in there looks good nice kind of a
97
00:05:14,240 --> 00:05:16,000
little bit loose not
98
00:05:16,000 --> 00:05:18,720
taunt taunt but that's
99
00:05:18,720 --> 00:05:20,320
adjustable and that's what the screw
100
00:05:20,320 --> 00:05:22,160
right here is for
101
00:05:22,160 --> 00:05:25,280
to adjust that tightness
102
00:05:25,280 --> 00:05:26,240
so
103
00:05:26,240 --> 00:05:28,560
i'm gonna set that just out of view
104
00:05:28,560 --> 00:05:30,160
and we're gonna
105
00:05:30,160 --> 00:05:31,680
pick up this foam and get down to the
106
00:05:31,680 --> 00:05:34,230
rest of it
107
00:05:34,240 --> 00:05:36,160
all right so
108
00:05:36,160 --> 00:05:38,639
here's one of the outer arms
109
00:05:38,639 --> 00:05:40,320
i'm going to kind of pull the box over a
110
00:05:40,320 --> 00:05:41,759
little bit so we can start setting this
111
00:05:41,759 --> 00:05:46,310
on the bench
112
00:05:46,320 --> 00:05:47,199
so
113
00:05:47,199 --> 00:05:48,800
that looks like a lot of our control
114
00:05:48,800 --> 00:05:50,639
board
115
00:05:50,639 --> 00:05:52,720
a lot of our motor cords and stuff like
116
00:05:52,720 --> 00:05:57,029
that are all coming out of right here
117
00:05:57,039 --> 00:06:01,909
which is interesting because i don't see
118
00:06:01,919 --> 00:06:04,000
a power adapter so
119
00:06:04,000 --> 00:06:05,520
somehow this is connecting somewhere
120
00:06:05,520 --> 00:06:11,909
else to get the power
121
00:06:11,919 --> 00:06:13,840
i apologize about sound guys someone's
122
00:06:13,840 --> 00:06:16,400
driving by
123
00:06:16,400 --> 00:06:18,160
beating out
124
00:06:18,160 --> 00:06:19,360
just
125
00:06:19,360 --> 00:06:22,639
listening to all their heart content so
126
00:06:22,639 --> 00:06:26,400
all right let's keep going so we got
127
00:06:26,400 --> 00:06:28,479
side pieces
128
00:06:28,479 --> 00:06:30,479
and it looks like we've got the other
129
00:06:30,479 --> 00:06:31,600
rail
130
00:06:31,600 --> 00:06:34,560
that well with the stepper motor and the
131
00:06:34,560 --> 00:06:37,600
belts in it as well for moving
132
00:06:37,600 --> 00:06:42,550
the other axis
133
00:06:42,560 --> 00:06:44,639
and that looks like that is all to the
134
00:06:44,639 --> 00:06:48,000
machine so let's get the book
135
00:06:48,000 --> 00:06:54,150
now let's start putting this together
136
00:06:54,160 --> 00:06:56,160
so probably sitting there going mike why
137
00:06:56,160 --> 00:06:57,280
are you putting one of these together
138
00:06:57,280 --> 00:06:58,880
you do 3d printing
139
00:06:58,880 --> 00:07:01,280
well this actually plays into the ball
140
00:07:01,280 --> 00:07:02,800
game here
141
00:07:02,800 --> 00:07:05,039
it uses a lot of the same technologies
142
00:07:05,039 --> 00:07:07,280
uses a laser
143
00:07:07,280 --> 00:07:09,520
oh i just couldn't see it so usb port
144
00:07:09,520 --> 00:07:11,759
usb-c that's cool
145
00:07:11,759 --> 00:07:17,909
power cord and ac adapter awesome
146
00:07:17,919 --> 00:07:20,160
all right now
147
00:07:20,160 --> 00:07:22,000
the most important thing anytime you're
148
00:07:22,000 --> 00:07:25,589
building one of these machines
149
00:07:25,599 --> 00:07:27,520
dos book
150
00:07:27,520 --> 00:07:33,670
all right
151
00:07:33,680 --> 00:07:35,520
so it doesn't look very complex got a
152
00:07:35,520 --> 00:07:37,840
very nice square frame i like the square
153
00:07:37,840 --> 00:07:39,280
frame
154
00:07:39,280 --> 00:07:40,960
um
155
00:07:40,960 --> 00:07:43,909
over the
156
00:07:43,919 --> 00:07:45,680
t frame version because the square frame
157
00:07:45,680 --> 00:07:47,360
kind of gives
158
00:07:47,360 --> 00:07:49,840
a little bit of workability
159
00:07:49,840 --> 00:07:56,070
that we don't normally see
160
00:07:56,080 --> 00:07:58,080
sorry about the zoom guys it's doing its
161
00:07:58,080 --> 00:08:04,230
own thing here
162
00:08:04,240 --> 00:08:07,840
trying to see if i can
163
00:08:07,840 --> 00:08:12,150
get it to obey
164
00:08:12,160 --> 00:08:17,029
white balancing
165
00:08:17,039 --> 00:08:21,510
let's see if it'll behave itself now
166
00:08:21,520 --> 00:08:22,879
all right so we're going to work on
167
00:08:22,879 --> 00:08:30,390
we're going to assemble the frame here
168
00:08:30,400 --> 00:08:32,560
so
169
00:08:32,560 --> 00:08:36,560
got a few wires got a few supports
170
00:08:36,560 --> 00:08:47,030
we got to get in the goody bag here
171
00:08:47,040 --> 00:08:48,720
all right
172
00:08:48,720 --> 00:08:51,120
so we got the s2s
173
00:08:51,120 --> 00:08:53,200
we got the s ones
174
00:08:53,200 --> 00:08:54,800
got a zip lock bag that's always good to
175
00:08:54,800 --> 00:08:56,720
keep around guys always keep them around
176
00:08:56,720 --> 00:09:00,550
we got some zip ties
177
00:09:00,560 --> 00:09:03,120
we've got the sd card
178
00:09:03,120 --> 00:09:05,360
and we've got
179
00:09:05,360 --> 00:09:08,160
a piece of metal i wonder if this is for
180
00:09:08,160 --> 00:09:09,680
testing the engravement on metal but
181
00:09:09,680 --> 00:09:17,910
we'll find out later
182
00:09:17,920 --> 00:09:25,350
all right so we got a cleaning
183
00:09:25,360 --> 00:09:30,150
so we've got a usb to usbc cable
184
00:09:30,160 --> 00:09:32,640
a couple more zip ties
185
00:09:32,640 --> 00:09:34,160
and we've got a very nice little
186
00:09:34,160 --> 00:09:36,800
phillips screwdriver couple out
187
00:09:36,800 --> 00:09:39,279
turnkeys and a few little wrenches all
188
00:09:39,279 --> 00:09:41,600
right
189
00:09:41,600 --> 00:09:43,360
we got all our parts now let's start
190
00:09:43,360 --> 00:09:45,519
putting this guy together shall we
191
00:09:45,519 --> 00:09:46,480
so
192
00:09:46,480 --> 00:09:48,160
again thank you to one lux for sending
193
00:09:48,160 --> 00:09:50,320
this it looks like a beautiful machine
194
00:09:50,320 --> 00:09:52,000
the material is very nice it's not
195
00:09:52,000 --> 00:09:54,560
flimsy it's very strong
196
00:09:54,560 --> 00:09:56,080
so and that's very important thing when
197
00:09:56,080 --> 00:09:58,000
you're working with tools
198
00:09:58,000 --> 00:10:02,310
you want strong materials so
199
00:10:02,320 --> 00:10:05,600
all right so s1s go on each side of this
200
00:10:05,600 --> 00:10:16,389
guy
201
00:10:16,399 --> 00:10:24,150
all right
202
00:10:24,160 --> 00:10:25,600
easy enough
203
00:10:25,600 --> 00:10:37,509
the y-axis module
204
00:10:37,519 --> 00:10:40,399
okay so you're gonna go over here
205
00:10:40,399 --> 00:10:43,200
your motor is gonna slide
206
00:10:43,200 --> 00:10:45,360
nicely inside and be hidden which is
207
00:10:45,360 --> 00:10:46,480
very
208
00:10:46,480 --> 00:10:49,750
very wise design
209
00:10:49,760 --> 00:10:53,440
and we're going to see the same thing
210
00:10:53,440 --> 00:10:56,389
with this side
211
00:10:56,399 --> 00:10:58,000
so the stepper motors are going to slip
212
00:10:58,000 --> 00:10:59,279
inside
213
00:10:59,279 --> 00:11:02,399
nice and heidi heidi
214
00:11:02,399 --> 00:11:04,160
you guys can kind of get the scope of
215
00:11:04,160 --> 00:11:07,200
the size of this machine this is a 24
216
00:11:07,200 --> 00:11:08,880
inch mat
217
00:11:08,880 --> 00:11:11,680
and so basically we've got a 24 by i
218
00:11:11,680 --> 00:11:13,279
believe 24.
219
00:11:13,279 --> 00:11:15,040
the machine's two foot by two foot which
220
00:11:15,040 --> 00:11:16,880
is not bad at all
221
00:11:16,880 --> 00:11:19,360
it's more than enough to put a laptop in
222
00:11:19,360 --> 00:11:21,200
definitely kind of an easy way to kind
223
00:11:21,200 --> 00:11:23,519
of work on stuff
224
00:11:23,519 --> 00:11:25,600
then you've got this last backer piece
225
00:11:25,600 --> 00:11:27,600
that
226
00:11:27,600 --> 00:11:31,269
well
227
00:11:31,279 --> 00:11:37,509
if i move stuff
228
00:11:37,519 --> 00:11:39,600
we'll go back here
229
00:11:39,600 --> 00:11:41,440
so a nice square frame we're going to
230
00:11:41,440 --> 00:11:43,040
start getting that put together with the
231
00:11:43,040 --> 00:11:46,790
s1s
232
00:11:46,800 --> 00:11:47,839
then we're going to do some of the
233
00:11:47,839 --> 00:11:49,680
wiring and we're going to
234
00:11:49,680 --> 00:12:01,829
take a very good close look at this guy
235
00:12:01,839 --> 00:12:10,150
so
236
00:12:10,160 --> 00:12:12,079
i know it's off the camera guys just the
237
00:12:12,079 --> 00:12:13,760
size of the
238
00:12:13,760 --> 00:12:15,760
of the machine there's three on each
239
00:12:15,760 --> 00:12:17,920
side that just go right in the front the
240
00:12:17,920 --> 00:12:19,839
stepper motor should be inside the frame
241
00:12:19,839 --> 00:12:20,880
here
242
00:12:20,880 --> 00:12:23,360
um it fits together really well i really
243
00:12:23,360 --> 00:12:25,040
like how that fits together
244
00:12:25,040 --> 00:12:25,920
and
245
00:12:25,920 --> 00:12:36,629
hides the motors from view
246
00:12:36,639 --> 00:12:38,320
and if we get done with this and we
247
00:12:38,320 --> 00:12:40,399
haven't hit an hour i am going to paint
248
00:12:40,399 --> 00:12:54,870
on the madcat so hey
249
00:12:54,880 --> 00:12:56,880
got one just kind of not wanting to play
250
00:12:56,880 --> 00:12:59,430
ball
251
00:12:59,440 --> 00:13:02,320
there's always one
252
00:13:02,320 --> 00:13:04,959
that's what the allen wrench is for
253
00:13:04,959 --> 00:13:06,320
and normally i'd have my little screw
254
00:13:06,320 --> 00:13:08,720
gun with my hex head bits but
255
00:13:08,720 --> 00:13:09,600
um
256
00:13:09,600 --> 00:13:11,600
i ran the battery out on that earlier
257
00:13:11,600 --> 00:13:13,120
today so
258
00:13:13,120 --> 00:13:15,839
it's up on the charger so
259
00:13:15,839 --> 00:13:17,440
um if you guys enjoy this content make
260
00:13:17,440 --> 00:13:18,720
sure you hit that subscribe button and
261
00:13:18,720 --> 00:13:20,880
that like button too because
262
00:13:20,880 --> 00:13:22,320
i think we're gonna have a lot of fun
263
00:13:22,320 --> 00:13:24,560
with this especially if we figure out
264
00:13:24,560 --> 00:13:26,880
how to if we're making like specialized
265
00:13:26,880 --> 00:13:27,839
armor
266
00:13:27,839 --> 00:13:29,519
for cosplay or something like that where
267
00:13:29,519 --> 00:13:31,279
we can print the armor and then come in
268
00:13:31,279 --> 00:13:33,120
here with
269
00:13:33,120 --> 00:13:34,720
the laser engraver for laser cut
270
00:13:34,720 --> 00:13:36,079
materials
271
00:13:36,079 --> 00:13:38,079
along with the cricut for dressing it up
272
00:13:38,079 --> 00:13:39,760
we can do a lot of cool stuff i think
273
00:13:39,760 --> 00:13:40,800
with this
274
00:13:40,800 --> 00:13:46,069
so
275
00:13:46,079 --> 00:13:47,440
that and just kind of one of those
276
00:13:47,440 --> 00:13:49,519
things it's built on the 3d printing
277
00:13:49,519 --> 00:13:52,720
technology premise with the x y axis
278
00:13:52,720 --> 00:13:54,639
um the only thing this doesn't have is a
279
00:13:54,639 --> 00:13:57,519
z um kind of just looking it over i
280
00:13:57,519 --> 00:14:00,079
notice there's no like lifter extension
281
00:14:00,079 --> 00:14:02,079
lifts for the legs
282
00:14:02,079 --> 00:14:04,880
i'm sure they probably have a kit for it
283
00:14:04,880 --> 00:14:06,160
that way i could put something bigger
284
00:14:06,160 --> 00:14:08,949
underneath it
285
00:14:08,959 --> 00:14:11,120
but i'm sure i can come up with a 2x4
286
00:14:11,120 --> 00:14:12,880
lifting system and stuff like that for
287
00:14:12,880 --> 00:14:14,399
this out in the shop
288
00:14:14,399 --> 00:14:15,760
this is not something that's going to go
289
00:14:15,760 --> 00:14:17,279
up in the regular print shop this is
290
00:14:17,279 --> 00:14:19,199
going to go out
291
00:14:19,199 --> 00:14:20,639
it's going to go out in the garage for
292
00:14:20,639 --> 00:14:23,040
safety
293
00:14:23,040 --> 00:14:24,240
all right so i got to do the three
294
00:14:24,240 --> 00:14:25,680
pieces in the back and then we got to do
295
00:14:25,680 --> 00:14:26,959
the wiring
296
00:14:26,959 --> 00:14:30,320
so just to kind of show you guys on this
297
00:14:30,320 --> 00:14:32,880
side here's the three that i installed
298
00:14:32,880 --> 00:14:34,639
and on the other side it's the same
299
00:14:34,639 --> 00:14:36,720
thing three right there now i'm going to
300
00:14:36,720 --> 00:14:43,509
turn around and do the same on this side
301
00:14:43,519 --> 00:14:46,550
all right
302
00:14:46,560 --> 00:14:55,430
so we'll grab that piece
303
00:14:55,440 --> 00:14:57,360
and i'll get those in
304
00:14:57,360 --> 00:14:58,720
so hopefully everybody's having a good
305
00:14:58,720 --> 00:14:59,760
night
306
00:14:59,760 --> 00:15:02,000
enjoying themselves
307
00:15:02,000 --> 00:15:31,030
on this tuesday
308
00:15:31,040 --> 00:15:33,519
all right get these back bolts in kind
309
00:15:33,519 --> 00:15:35,120
of have this frame together and then we
310
00:15:35,120 --> 00:15:38,710
will be putting the
311
00:15:38,720 --> 00:15:41,360
x-axis together with the mounting the
312
00:15:41,360 --> 00:15:43,279
laser head which would be kind of fun i
313
00:15:43,279 --> 00:15:48,389
think
314
00:15:48,399 --> 00:15:49,759
so anybody out there been printing
315
00:15:49,759 --> 00:15:51,279
anything fun or doing anything
316
00:15:51,279 --> 00:15:54,000
interesting with their 3d printing
317
00:15:54,000 --> 00:15:55,759
definitely come on the chat and share
318
00:15:55,759 --> 00:16:11,749
guys
319
00:16:11,759 --> 00:16:27,910
so
320
00:16:27,920 --> 00:16:30,240
all right getting that bolt in there
321
00:16:30,240 --> 00:16:32,880
get this thing kind of
322
00:16:32,880 --> 00:16:38,629
framed up here
323
00:16:38,639 --> 00:16:40,880
usually once you get one the others fall
324
00:16:40,880 --> 00:16:48,829
in pretty pretty easy which is always
325
00:16:48,839 --> 00:16:51,360
good so looking at the machine and kind
326
00:16:51,360 --> 00:16:52,720
of judging what i'm seeing here
327
00:16:52,720 --> 00:16:54,880
initially it's very hardy
328
00:16:54,880 --> 00:16:56,959
very well constructed the construction
329
00:16:56,959 --> 00:17:00,160
is very well thought out
330
00:17:00,160 --> 00:17:02,399
with the hiding of the stepper motors
331
00:17:02,399 --> 00:17:04,720
the way the metal frame fits together is
332
00:17:04,720 --> 00:17:06,319
very clean
333
00:17:06,319 --> 00:17:08,000
not a lot of jagged edges stuff like
334
00:17:08,000 --> 00:17:12,789
that which is very important
335
00:17:12,799 --> 00:17:14,559
the square frame the only thing that is
336
00:17:14,559 --> 00:17:17,199
limp is is you're limited to the area of
337
00:17:17,199 --> 00:17:18,720
the frame
338
00:17:18,720 --> 00:17:21,520
but honestly this is huge
339
00:17:21,520 --> 00:17:23,439
i mean this is bigger than my
340
00:17:23,439 --> 00:17:25,760
cr-10 this is almost as big as my cr-10
341
00:17:25,760 --> 00:17:27,520
max build plate
342
00:17:27,520 --> 00:17:29,760
so the internal area of this metal frame
343
00:17:29,760 --> 00:17:30,720
is
344
00:17:30,720 --> 00:17:33,440
quite nice
345
00:17:33,440 --> 00:17:35,200
all right got those six bolts put
346
00:17:35,200 --> 00:17:37,830
together
347
00:17:37,840 --> 00:17:40,720
three three three
348
00:17:40,720 --> 00:17:47,270
and now this piece
349
00:17:47,280 --> 00:17:49,039
which i want to make sure i put it
350
00:17:49,039 --> 00:17:54,789
together properly
351
00:17:54,799 --> 00:17:58,950
which looks like it goes
352
00:17:58,960 --> 00:18:02,390
this way
353
00:18:02,400 --> 00:18:15,830
so
354
00:18:15,840 --> 00:18:16,799
awesome
355
00:18:16,799 --> 00:18:18,799
so that's using the same bolts that we
356
00:18:18,799 --> 00:18:43,190
have been using the s1s
357
00:18:43,200 --> 00:18:45,520
just want to make sure i get them lined
358
00:18:45,520 --> 00:18:58,870
up there
359
00:18:58,880 --> 00:19:00,000
all right
360
00:19:00,000 --> 00:19:01,760
there it goes
361
00:19:01,760 --> 00:19:20,630
a lot smoother now
362
00:19:20,640 --> 00:19:22,320
and get these last two in and we'll have
363
00:19:22,320 --> 00:19:40,150
this access assembled
364
00:19:40,160 --> 00:19:41,280
all right
365
00:19:41,280 --> 00:19:43,039
so we got that on there we got that in
366
00:19:43,039 --> 00:19:44,480
place
367
00:19:44,480 --> 00:19:47,360
so we're through the initial
368
00:19:47,360 --> 00:19:50,480
page of the structure assembly
369
00:19:50,480 --> 00:19:52,480
now we actually get to have the fun and
370
00:19:52,480 --> 00:19:54,400
mount
371
00:19:54,400 --> 00:19:55,679
mount our
372
00:19:55,679 --> 00:19:57,919
laser
373
00:19:57,919 --> 00:20:07,350
into the frame
374
00:20:07,360 --> 00:20:09,840
so we gotta back this off so this will
375
00:20:09,840 --> 00:20:12,799
slide into the frame
376
00:20:12,799 --> 00:20:14,000
sorry if i'm getting my head in the way
377
00:20:14,000 --> 00:20:20,310
i don't mean to
378
00:20:20,320 --> 00:20:22,559
and we'll slide that down now what you
379
00:20:22,559 --> 00:20:24,559
want to do with a flat surface is you
380
00:20:24,559 --> 00:20:26,960
want to get the laser just above it
381
00:20:26,960 --> 00:20:28,400
and tighten that up
382
00:20:28,400 --> 00:20:30,080
so that way it'll move around like right
383
00:20:30,080 --> 00:20:31,840
now i've got it way too low you don't
384
00:20:31,840 --> 00:20:33,600
really want the laser overly visible
385
00:20:33,600 --> 00:20:35,840
hurt your eyes
386
00:20:35,840 --> 00:20:37,840
but now we have the laser in place now
387
00:20:37,840 --> 00:20:39,919
comes the fun we've got all the main
388
00:20:39,919 --> 00:20:42,559
components on the machine now we got a
389
00:20:42,559 --> 00:20:43,919
wire
390
00:20:43,919 --> 00:20:48,789
so now we got to plug in the wires
391
00:20:48,799 --> 00:20:49,840
so
392
00:20:49,840 --> 00:20:52,400
and for the detail on here
393
00:20:52,400 --> 00:20:54,480
it is recommended to flip the machine
394
00:20:54,480 --> 00:20:55,679
over
395
00:20:55,679 --> 00:20:56,559
which
396
00:20:56,559 --> 00:20:58,480
not a bad recommendation so we'll pick
397
00:20:58,480 --> 00:20:59,919
up the frame here
398
00:20:59,919 --> 00:21:01,679
and we'll flip it over
399
00:21:01,679 --> 00:21:03,280
all right
400
00:21:03,280 --> 00:21:05,760
so i'm going to start up here
401
00:21:05,760 --> 00:21:07,840
and i'm going to take this wire and i'm
402
00:21:07,840 --> 00:21:10,400
going to plug in that stepper motor
403
00:21:10,400 --> 00:21:12,480
this wire over here goes to this stepper
404
00:21:12,480 --> 00:21:16,230
motor
405
00:21:16,240 --> 00:21:17,919
now we've got
406
00:21:17,919 --> 00:21:20,240
the longer wires
407
00:21:20,240 --> 00:21:23,200
now to me this looks like uh
408
00:21:23,200 --> 00:21:25,760
stepper or limiting switches
409
00:21:25,760 --> 00:21:27,200
so we got to make sure we get those
410
00:21:27,200 --> 00:21:29,039
placed properly
411
00:21:29,039 --> 00:21:31,840
and
412
00:21:31,840 --> 00:21:34,240
we got a plug here and another plug here
413
00:21:34,240 --> 00:21:36,320
i'm assuming this goes out to the laser
414
00:21:36,320 --> 00:21:38,640
but i'm just making an assumption here
415
00:21:38,640 --> 00:21:40,559
i've got the laser actually part kind of
416
00:21:40,559 --> 00:21:42,640
hanging off the desk at the moment
417
00:21:42,640 --> 00:21:44,720
so
418
00:21:44,720 --> 00:21:45,919
um
419
00:21:45,919 --> 00:21:49,190
yeah so this
420
00:21:49,200 --> 00:21:50,720
wire
421
00:21:50,720 --> 00:21:54,870
it's showing these leads
422
00:21:54,880 --> 00:21:56,960
but i don't see these anywhere they were
423
00:21:56,960 --> 00:21:58,799
not in the bag so i'm assuming that's
424
00:21:58,799 --> 00:22:01,200
what the zip ties are actually for
425
00:22:01,200 --> 00:22:04,480
but i can't zip tie that
426
00:22:04,480 --> 00:22:06,400
because the zip tie can't go within the
427
00:22:06,400 --> 00:22:08,159
chassis
428
00:22:08,159 --> 00:22:10,559
so that's a little problematic so
429
00:22:10,559 --> 00:22:13,440
i'll have to figure this part out
430
00:22:13,440 --> 00:22:16,080
to making sure that s2 and s4 which
431
00:22:16,080 --> 00:22:18,240
aren't here
432
00:22:18,240 --> 00:22:19,840
at least not with my machine i've got an
433
00:22:19,840 --> 00:22:23,830
s2
434
00:22:23,840 --> 00:22:26,080
but looking at this machine there's no
435
00:22:26,080 --> 00:22:29,350
no holes over here
436
00:22:29,360 --> 00:22:31,120
and the machine's upside down what
437
00:22:31,120 --> 00:22:33,039
they're showing here because
438
00:22:33,039 --> 00:22:34,559
there's the circuit board which is right
439
00:22:34,559 --> 00:22:36,320
there
440
00:22:36,320 --> 00:22:39,440
so right now this is just kind of laying
441
00:22:39,440 --> 00:22:41,120
down the surface of the machine so i
442
00:22:41,120 --> 00:22:45,990
have to figure that out later on
443
00:22:46,000 --> 00:22:52,549
and then this comes out here
444
00:22:52,559 --> 00:22:54,400
so we've got this wire
445
00:22:54,400 --> 00:22:56,080
i'll pull this back up so you guys can
446
00:22:56,080 --> 00:22:57,760
see
447
00:22:57,760 --> 00:22:59,520
we've got this wire which comes out to
448
00:22:59,520 --> 00:23:01,440
the laser itself so i'll get that
449
00:23:01,440 --> 00:23:06,710
plugged in
450
00:23:06,720 --> 00:23:08,960
just like that
451
00:23:08,960 --> 00:23:13,200
this one comes to the stepper motor
452
00:23:13,200 --> 00:23:18,630
so we'll get that one plugged in
453
00:23:18,640 --> 00:23:20,559
and then we've got what looks like these
454
00:23:20,559 --> 00:23:22,880
two limiting switches i gotta figure out
455
00:23:22,880 --> 00:23:26,080
where those are going right now
456
00:23:26,080 --> 00:23:29,909
so
457
00:23:29,919 --> 00:23:49,190
unless i just missed it
458
00:23:49,200 --> 00:23:51,120
i don't know where these
459
00:23:51,120 --> 00:23:55,669
mount
460
00:23:55,679 --> 00:24:07,190
hmm
461
00:24:07,200 --> 00:24:15,590
x and y axis
462
00:24:15,600 --> 00:24:19,360
not seeing that so that's kind of a
463
00:24:19,360 --> 00:24:22,000
little disco oh okay okay
464
00:24:22,000 --> 00:24:26,630
okay
465
00:24:26,640 --> 00:24:33,269
now i'm seeing
466
00:24:33,279 --> 00:24:38,470
so the y-axis goes over here
467
00:24:38,480 --> 00:24:41,600
so it looks like they both mount
468
00:24:41,600 --> 00:24:54,630
here
469
00:24:54,640 --> 00:24:56,559
okay
470
00:24:56,559 --> 00:24:59,110
so
471
00:24:59,120 --> 00:25:00,480
one mounts
472
00:25:00,480 --> 00:25:01,600
here
473
00:25:01,600 --> 00:25:07,669
one mounts here
474
00:25:07,679 --> 00:25:12,470
yeah that's not confusing at all
475
00:25:12,480 --> 00:25:14,400
but now it makes sense
476
00:25:14,400 --> 00:25:16,159
and that's what the s2 bolts are for so
477
00:25:16,159 --> 00:25:22,070
we'll use that
478
00:25:22,080 --> 00:25:23,760
which is what the smaller allen wrench
479
00:25:23,760 --> 00:25:29,190
is for
480
00:25:29,200 --> 00:25:36,630
and the small phillips head screwdriver
481
00:25:36,640 --> 00:25:38,559
and we'll get the x on the x-axis and
482
00:25:38,559 --> 00:25:52,230
the y will go on the y-axis
483
00:25:52,240 --> 00:25:53,919
when i do use this for the first time it
484
00:25:53,919 --> 00:25:56,320
very much will be supervised
485
00:25:56,320 --> 00:25:57,760
as i said this is going to go out in my
486
00:25:57,760 --> 00:25:59,840
garage workshop area
487
00:25:59,840 --> 00:26:01,600
not in the 3d printing shop with the
488
00:26:01,600 --> 00:26:02,960
other printers
489
00:26:02,960 --> 00:26:06,789
just to make sure i don't have a
490
00:26:06,799 --> 00:26:08,960
smoke issue and stuff like that
491
00:26:08,960 --> 00:26:10,080
because i've never used one of these
492
00:26:10,080 --> 00:26:12,159
before so i'm curious to see how it how
493
00:26:12,159 --> 00:26:17,029
it's going to go
494
00:26:17,039 --> 00:26:18,400
whether it's going to you know smoke my
495
00:26:18,400 --> 00:26:20,400
house out or
496
00:26:20,400 --> 00:26:22,559
or what it's going to do so it's going
497
00:26:22,559 --> 00:26:24,480
to be a new experience which is always
498
00:26:24,480 --> 00:26:26,400
good new experiences take you out of
499
00:26:26,400 --> 00:26:28,080
your comfort zone
500
00:26:28,080 --> 00:26:31,520
and that is a great thing sometimes to
501
00:26:31,520 --> 00:26:33,120
move out of the comfort zone and
502
00:26:33,120 --> 00:26:35,360
experience new things
503
00:26:35,360 --> 00:26:37,120
that's kind of what's happening to me
504
00:26:37,120 --> 00:26:47,269
here
505
00:26:47,279 --> 00:26:48,880
so hopefully everybody's doing good
506
00:26:48,880 --> 00:26:50,640
tonight remember if you're new here and
507
00:26:50,640 --> 00:26:52,240
you're interested in the topics we're
508
00:26:52,240 --> 00:26:54,240
covering tonight
509
00:26:54,240 --> 00:26:55,279
this is
510
00:26:55,279 --> 00:26:56,960
might just be the only thing we cover
511
00:26:56,960 --> 00:26:59,039
tonight is disassembly
512
00:26:59,039 --> 00:27:01,120
but i might move to some painting too i
513
00:27:01,120 --> 00:27:03,279
have been itching to do some painting on
514
00:27:03,279 --> 00:27:17,269
some 3d prints i've got laying around
515
00:27:17,279 --> 00:27:22,710
all right
516
00:27:22,720 --> 00:27:26,950
one more screw
517
00:27:26,960 --> 00:27:29,440
and i think i've got this all
518
00:27:29,440 --> 00:27:39,830
assembled up
519
00:27:39,840 --> 00:27:41,440
there we go
520
00:27:41,440 --> 00:27:43,760
got our limiting switches
521
00:27:43,760 --> 00:27:45,600
in place to make sure our accesses don't
522
00:27:45,600 --> 00:27:47,679
overrun
523
00:27:47,679 --> 00:27:49,760
got a few extra spare bolts laying here
524
00:27:49,760 --> 00:27:51,520
which is always
525
00:27:51,520 --> 00:27:59,669
a good thing to have
526
00:27:59,679 --> 00:28:02,080
okay so this is the focusing fixing
527
00:28:02,080 --> 00:28:04,470
block
528
00:28:04,480 --> 00:28:07,039
is what that is
529
00:28:07,039 --> 00:28:09,600
so you put that down and then you put
530
00:28:09,600 --> 00:28:11,360
the
531
00:28:11,360 --> 00:28:13,440
engraved object underneath so it aligns
532
00:28:13,440 --> 00:28:14,880
your laser module
533
00:28:14,880 --> 00:28:16,880
it has inclination protection which is
534
00:28:16,880 --> 00:28:19,679
always a great a good thing
535
00:28:19,679 --> 00:28:22,159
software is out there for download i
536
00:28:22,159 --> 00:28:23,600
will have to be downloading that if you
537
00:28:23,600 --> 00:28:24,880
guys want to see more with the laser
538
00:28:24,880 --> 00:28:26,720
engravers definitely comment down below
539
00:28:26,720 --> 00:28:28,000
and let me know
540
00:28:28,000 --> 00:28:29,679
that this is actually a topic you want
541
00:28:29,679 --> 00:28:31,279
to see stuff on
542
00:28:31,279 --> 00:28:35,029
so let's get this guy flipped over
543
00:28:35,039 --> 00:28:36,399
and actually kind of take a look at it
544
00:28:36,399 --> 00:28:38,399
so before i put it back down you guys
545
00:28:38,399 --> 00:28:40,799
can see the laser mounting fans up
546
00:28:40,799 --> 00:28:42,080
all that kind of stuff i know the frame
547
00:28:42,080 --> 00:28:44,320
kind of gets in the way but this very
548
00:28:44,320 --> 00:28:45,760
simple machine
549
00:28:45,760 --> 00:28:47,279
can actually do
550
00:28:47,279 --> 00:28:50,159
makes stuff a lot of fun because you're
551
00:28:50,159 --> 00:28:53,990
it kind of opens a door
552
00:28:54,000 --> 00:29:01,029
to what you can do material wise
553
00:29:01,039 --> 00:29:04,870
so
554
00:29:04,880 --> 00:29:06,720
and i'm noticing like right here would
555
00:29:06,720 --> 00:29:09,440
have been a great place to have a holder
556
00:29:09,440 --> 00:29:11,039
for the cord
557
00:29:11,039 --> 00:29:14,399
that i don't have
558
00:29:14,399 --> 00:29:16,480
so i'm gonna i'm assuming that's maybe
559
00:29:16,480 --> 00:29:19,679
why the zip ties are here
560
00:29:19,679 --> 00:29:22,870
to try to thread it
561
00:29:22,880 --> 00:29:26,230
through the holes
562
00:29:26,240 --> 00:29:28,320
uh the instruction manual
563
00:29:28,320 --> 00:29:29,440
showed some
564
00:29:29,440 --> 00:29:32,080
holders but
565
00:29:32,080 --> 00:29:35,200
i didn't see said holders
566
00:29:35,200 --> 00:29:37,600
but if you get creative
567
00:29:37,600 --> 00:29:38,880
with
568
00:29:38,880 --> 00:29:41,760
fishing your uh
569
00:29:41,760 --> 00:29:43,520
fishing your zip tie there you can
570
00:29:43,520 --> 00:29:45,520
easily get this guy mounted up so the
571
00:29:45,520 --> 00:29:46,960
cables
572
00:29:46,960 --> 00:29:51,669
are up safe and out of the way
573
00:29:51,679 --> 00:29:56,789
like you guys see here
574
00:29:56,799 --> 00:29:58,240
so
575
00:29:58,240 --> 00:30:01,669
definitely a
576
00:30:01,679 --> 00:30:17,510
definitely a very neat machine
577
00:30:17,520 --> 00:30:26,070
so i'll work on that zip tie later
578
00:30:26,080 --> 00:30:27,679
you can see where the intended mounts
579
00:30:27,679 --> 00:30:31,120
were for the other clips here
580
00:30:31,120 --> 00:30:32,720
but i don't see
581
00:30:32,720 --> 00:30:34,240
a good way to put that on so i'll do
582
00:30:34,240 --> 00:30:36,480
that later but you guys can see here
583
00:30:36,480 --> 00:30:38,080
very simple machine
584
00:30:38,080 --> 00:30:40,789
usb
585
00:30:40,799 --> 00:30:42,399
plug into the pc
586
00:30:42,399 --> 00:30:44,720
it's also got the usbc port so it's got
587
00:30:44,720 --> 00:30:47,360
both where you could use a thumb drive
588
00:30:47,360 --> 00:30:51,510
it comes with an sd card
589
00:30:51,520 --> 00:30:54,559
insert and device but i don't have an sd
590
00:30:54,559 --> 00:30:56,480
card
591
00:30:56,480 --> 00:30:58,640
that's a little odd but i know these
592
00:30:58,640 --> 00:31:00,960
guys sent me the files so i'm not too
593
00:31:00,960 --> 00:31:02,640
worried about that but that'll be
594
00:31:02,640 --> 00:31:04,559
something we do another time i just
595
00:31:04,559 --> 00:31:06,559
wanted to get this guy assembled this is
596
00:31:06,559 --> 00:31:09,600
the one one lux jl7
597
00:31:09,600 --> 00:31:11,440
laser engraver we're gonna have some fun
598
00:31:11,440 --> 00:31:13,840
with this later on but definitely a lot
599
00:31:13,840 --> 00:31:15,520
of value in the box this thing is gonna
600
00:31:15,520 --> 00:31:17,600
be oh i found the sd card it was in the
601
00:31:17,600 --> 00:31:18,559
port
602
00:31:18,559 --> 00:31:19,840
so we'll get that out and definitely
603
00:31:19,840 --> 00:31:21,600
play with that too and try some test
604
00:31:21,600 --> 00:31:23,760
prints and
605
00:31:23,760 --> 00:31:26,080
all kinds of fun stuff to do here
606
00:31:26,080 --> 00:31:27,600
but
607
00:31:27,600 --> 00:31:29,840
that will be for a later day because i
608
00:31:29,840 --> 00:31:32,559
don't have my workbench put together yet
609
00:31:32,559 --> 00:31:34,159
that was a project i was working on just
610
00:31:34,159 --> 00:31:35,600
today was trying to get my garage
611
00:31:35,600 --> 00:31:37,840
cleaned up from the move so
612
00:31:37,840 --> 00:31:43,590
lots of fun there
613
00:31:43,600 --> 00:31:44,960
and definitely kind of curious in your
614
00:31:44,960 --> 00:31:47,120
guys's input on seeing what all is going
615
00:31:47,120 --> 00:31:49,760
through the 3d printing world here
616
00:31:49,760 --> 00:31:51,519
laser engraving i mean like i said it's
617
00:31:51,519 --> 00:31:53,360
x y axis it's built very much the
618
00:31:53,360 --> 00:31:55,840
similar way to a 3d printer is
619
00:31:55,840 --> 00:31:57,519
instead of filament we're using a laser
620
00:31:57,519 --> 00:31:58,840
we're burning
621
00:31:58,840 --> 00:32:00,559
um
622
00:32:00,559 --> 00:32:02,559
into an object so definitely kind of a
623
00:32:02,559 --> 00:32:04,159
very cool machine this is a very large
624
00:32:04,159 --> 00:32:06,000
machine which is pretty awesome like i
625
00:32:06,000 --> 00:32:07,679
said this build area is about almost the
626
00:32:07,679 --> 00:32:11,039
same as my cr-10 build plate
627
00:32:11,039 --> 00:32:13,279
that we've got here so
628
00:32:13,279 --> 00:32:15,360
definitely a really cool
629
00:32:15,360 --> 00:32:17,279
area to work with so i'm going to move
630
00:32:17,279 --> 00:32:18,960
this off to the side what do you guys
631
00:32:18,960 --> 00:32:33,029
say we have some fun with painting
632
00:32:33,039 --> 00:32:34,960
all right
633
00:32:34,960 --> 00:32:36,559
well actually
634
00:32:36,559 --> 00:32:38,159
i don't know guys i'm
635
00:32:38,159 --> 00:32:39,600
kind of
636
00:32:39,600 --> 00:32:40,799
thinking maybe i ought to kill the
637
00:32:40,799 --> 00:32:43,120
stream here i don't know um
638
00:32:43,120 --> 00:32:44,880
has anybody got any 3d printing
639
00:32:44,880 --> 00:32:47,039
questions quandaries problems or
640
00:32:47,039 --> 00:32:48,640
anything they want to talk about tonight
641
00:32:48,640 --> 00:32:49,919
because uh
642
00:32:49,919 --> 00:32:52,000
i'm definitely open to
643
00:32:52,000 --> 00:32:54,799
doing a troubleshooting session too
644
00:32:54,799 --> 00:33:00,149
because those can be a lot of fun
645
00:33:00,159 --> 00:33:01,919
clean up my mess here and keep
646
00:33:01,919 --> 00:33:04,480
everything for that machine together
647
00:33:04,480 --> 00:33:08,320
that would be very bad of me to uh
648
00:33:08,320 --> 00:33:11,200
lose everything here right at the end
649
00:33:11,200 --> 00:33:12,960
especially this engraving block so i
650
00:33:12,960 --> 00:33:15,519
gotta understand how that works
651
00:33:15,519 --> 00:33:17,600
so even i have to go through learning
652
00:33:17,600 --> 00:33:19,519
sessions and
653
00:33:19,519 --> 00:33:21,840
figuring out how new machines work
654
00:33:21,840 --> 00:33:23,360
like today i'm just struggling with the
655
00:33:23,360 --> 00:33:25,840
new ender 3s1 pro trying to figure out
656
00:33:25,840 --> 00:33:27,440
leveling issues with it it was kind of
657
00:33:27,440 --> 00:33:28,640
being of a
658
00:33:28,640 --> 00:33:36,070
bear to work with
659
00:33:36,080 --> 00:33:38,240
and still haven't solved it completely
660
00:33:38,240 --> 00:33:39,440
so
661
00:33:39,440 --> 00:33:40,960
you know that's kind of just how things
662
00:33:40,960 --> 00:33:42,799
go sometimes 3d printing can be a
663
00:33:42,799 --> 00:33:44,720
quandary
664
00:33:44,720 --> 00:33:49,190
oh
665
00:33:49,200 --> 00:33:51,360
you can tell i start i started on this i
666
00:33:51,360 --> 00:33:53,679
don't know how long ago
667
00:33:53,679 --> 00:33:56,559
it has been a while but definitely
668
00:33:56,559 --> 00:33:59,840
mad cat fun here so
669
00:33:59,840 --> 00:34:01,519
oh i don't even know what colors to go
670
00:34:01,519 --> 00:34:02,480
with
671
00:34:02,480 --> 00:34:03,600
uh
672
00:34:03,600 --> 00:34:06,240
that's always a hard one
673
00:34:06,240 --> 00:34:10,560
i started with kind of the military camo
674
00:34:10,560 --> 00:34:14,240
i don't have to stick to that
675
00:34:14,240 --> 00:34:15,599
that's kind of the cool thing you can
676
00:34:15,599 --> 00:34:22,710
always kind of change
677
00:34:22,720 --> 00:34:24,720
slid to the left here you talking about
678
00:34:24,720 --> 00:34:26,159
the
679
00:34:26,159 --> 00:34:33,669
constitution refit enterprise
680
00:34:33,679 --> 00:34:35,520
how's it going today it's been a long
681
00:34:35,520 --> 00:34:38,079
time man glad to see you back
682
00:34:38,079 --> 00:34:41,440
you just missed me playing with a laser
683
00:34:41,440 --> 00:34:42,560
but
684
00:34:42,560 --> 00:34:45,440
this mad cat is uh
685
00:34:45,440 --> 00:34:47,040
you know this was the first 3d print
686
00:34:47,040 --> 00:34:49,679
someone gave me before i was even 3d
687
00:34:49,679 --> 00:34:51,119
printing
688
00:34:51,119 --> 00:34:52,320
and uh
689
00:34:52,320 --> 00:34:55,280
i haven't really worked on it at all
690
00:34:55,280 --> 00:34:56,800
i started it
691
00:34:56,800 --> 00:34:58,000
and
692
00:34:58,000 --> 00:34:59,599
well we all know how life can get in the
693
00:34:59,599 --> 00:35:01,359
way of what you're doing
694
00:35:01,359 --> 00:35:03,510
and that's kind of where we wound up
695
00:35:03,510 --> 00:35:10,870
[Applause]
696
00:35:10,880 --> 00:35:17,270
oh
697
00:35:17,280 --> 00:35:23,589
time for the wet palette
698
00:35:23,599 --> 00:35:24,880
that laser is going to be interesting
699
00:35:24,880 --> 00:35:27,119
once i have the garage set up so right
700
00:35:27,119 --> 00:35:30,960
now the garage is uh
701
00:35:30,960 --> 00:35:34,320
what did i do to this poor thing
702
00:35:34,320 --> 00:35:38,950
still very much a work in progress
703
00:35:38,960 --> 00:35:43,030
so is the print shop so
704
00:35:43,040 --> 00:35:48,150
okay now this says something guys
705
00:35:48,160 --> 00:35:52,150
those are still tacky
706
00:35:52,160 --> 00:35:56,390
and i haven't used this wet palette
707
00:35:56,400 --> 00:36:02,150
in a
708
00:36:02,160 --> 00:36:04,720
probably
709
00:36:04,720 --> 00:36:06,880
early july
710
00:36:06,880 --> 00:36:10,829
was the last time i was in here
711
00:36:10,839 --> 00:36:12,400
so
712
00:36:12,400 --> 00:36:14,160
that's a heck of a wet palette right
713
00:36:14,160 --> 00:36:19,190
there that that it still has tacky paint
714
00:36:19,200 --> 00:36:33,349
the question is is it usable paint
715
00:36:33,359 --> 00:36:35,520
and the answer to that is more than
716
00:36:35,520 --> 00:36:47,910
likely yes
717
00:36:47,920 --> 00:36:54,150
got to get the good fun water out
718
00:36:54,160 --> 00:36:56,160
distilled water always makes a painter's
719
00:36:56,160 --> 00:37:01,829
friend
720
00:37:01,839 --> 00:37:04,079
so that
721
00:37:04,079 --> 00:37:09,040
uh yeah different state uh still tacky
722
00:37:09,040 --> 00:37:13,040
still usable a little tarish
723
00:37:13,040 --> 00:37:14,240
but
724
00:37:14,240 --> 00:37:16,160
nothing a little bit of distilled water
725
00:37:16,160 --> 00:37:19,430
can't fix
726
00:37:19,440 --> 00:37:21,359
that i'm actually pretty impressed this
727
00:37:21,359 --> 00:37:24,800
is a red grass wet palette
728
00:37:24,800 --> 00:37:26,000
so
729
00:37:26,000 --> 00:37:28,000
it's a much bigger brush than i wanted
730
00:37:28,000 --> 00:37:29,760
but
731
00:37:29,760 --> 00:37:32,160
we can cover some of the helps if i keep
732
00:37:32,160 --> 00:37:33,359
it on screen
733
00:37:33,359 --> 00:37:35,359
still getting used to
734
00:37:35,359 --> 00:37:36,960
paint on stream
735
00:37:36,960 --> 00:37:41,030
we take our time
736
00:37:41,040 --> 00:37:43,680
it'll paint on just fine
737
00:37:43,680 --> 00:37:56,069
i can always switch to a smaller brush
738
00:37:56,079 --> 00:37:57,839
so what's everybody else been working on
739
00:37:57,839 --> 00:38:03,430
um you guys can tell
740
00:38:03,440 --> 00:38:05,599
i am just now really kind of getting
741
00:38:05,599 --> 00:38:07,359
back into going so
742
00:38:07,359 --> 00:38:10,480
uh the print shop is
743
00:38:10,480 --> 00:38:12,560
nearing completion
744
00:38:12,560 --> 00:38:14,560
um
745
00:38:14,560 --> 00:38:16,839
the electrical was done this last
746
00:38:16,839 --> 00:38:19,680
weekend so
747
00:38:19,680 --> 00:38:22,400
um should not have any brown outs i got
748
00:38:22,400 --> 00:38:24,640
the new lighting installed
749
00:38:24,640 --> 00:38:27,520
so we have been busy campers around here
750
00:38:27,520 --> 00:38:29,119
trying to get the print shop
751
00:38:29,119 --> 00:38:30,400
fixed
752
00:38:30,400 --> 00:38:33,920
so that one we can show you the new one
753
00:38:33,920 --> 00:38:36,470
because
754
00:38:36,480 --> 00:38:40,240
i'm quite proud of this design
755
00:38:40,240 --> 00:38:42,480
um shifting from the one that we had in
756
00:38:42,480 --> 00:38:44,720
missouri i loved the one the one i had
757
00:38:44,720 --> 00:38:46,640
in missouri i was outgrowing
758
00:38:46,640 --> 00:38:49,040
and you know we're growing into it now
759
00:38:49,040 --> 00:38:50,000
um
760
00:38:50,000 --> 00:38:50,960
actually
761
00:38:50,960 --> 00:38:53,119
honestly the newer machines i have i
762
00:38:53,119 --> 00:38:54,960
probably
763
00:38:54,960 --> 00:38:57,680
i'm gonna have to downsize to
764
00:38:57,680 --> 00:39:00,000
stay fit
765
00:39:00,000 --> 00:39:04,160
in this print shop but that's okay too
766
00:39:04,160 --> 00:39:10,069
because
767
00:39:10,079 --> 00:39:14,560
it's real easy to get oversized
768
00:39:14,560 --> 00:39:16,480
but honestly if a machine is not
769
00:39:16,480 --> 00:39:18,320
functioning
770
00:39:18,320 --> 00:39:19,520
correctly
771
00:39:19,520 --> 00:39:20,800
and it's just not
772
00:39:20,800 --> 00:39:24,069
doing what you need it to do
773
00:39:24,079 --> 00:39:28,079
maybe it's time to let that machine go
774
00:39:28,079 --> 00:39:29,680
and replace it with something bigger
775
00:39:29,680 --> 00:39:30,960
better and better which if you guys
776
00:39:30,960 --> 00:39:33,119
caught the last stream that any cubic is
777
00:39:33,119 --> 00:39:45,589
massive
778
00:39:45,599 --> 00:39:48,000
um i still i have it powered on but i
779
00:39:48,000 --> 00:39:50,240
haven't run a test print with it yet
780
00:39:50,240 --> 00:39:52,000
um just kind of one of those things i
781
00:39:52,000 --> 00:39:55,520
want to do i'm base coating the guns
782
00:39:55,520 --> 00:39:57,839
with kind of i want the white to kind of
783
00:39:57,839 --> 00:39:59,040
pull through
784
00:39:59,040 --> 00:40:00,720
so when i come back with like silvers
785
00:40:00,720 --> 00:40:04,390
and gunmetal
786
00:40:04,400 --> 00:40:06,560
it kind of really makes the gun have
787
00:40:06,560 --> 00:40:08,560
that metallic pop
788
00:40:08,560 --> 00:40:12,320
so that's why i'm black base coating
789
00:40:12,320 --> 00:40:13,599
because that's a lot of what's going on
790
00:40:13,599 --> 00:40:15,680
with this model right now is still
791
00:40:15,680 --> 00:40:19,589
just bringing in a base coat
792
00:40:19,599 --> 00:40:20,640
and this
793
00:40:20,640 --> 00:40:21,839
kind of
794
00:40:21,839 --> 00:40:24,000
grubby paint kind of gives a little kind
795
00:40:24,000 --> 00:40:25,599
of an advantage here
796
00:40:25,599 --> 00:40:28,720
of kind of getting a uh
797
00:40:28,720 --> 00:40:30,720
kind of looks like grease
798
00:40:30,720 --> 00:40:32,480
kind of mixing gives giving me some
799
00:40:32,480 --> 00:40:34,400
texture that i'm not used to seeing i'm
800
00:40:34,400 --> 00:40:36,079
kind of liking
801
00:40:36,079 --> 00:40:43,190
so
802
00:40:43,200 --> 00:40:45,440
so the print is squeaky does it squishy
803
00:40:45,440 --> 00:40:48,400
does it feel like the print is thin
804
00:40:48,400 --> 00:40:53,510
almost
805
00:40:53,520 --> 00:40:55,040
um like it's not
806
00:40:55,040 --> 00:40:59,910
solid
807
00:40:59,920 --> 00:41:02,240
because if it's feeling squishy
808
00:41:02,240 --> 00:41:03,040
not
809
00:41:03,040 --> 00:41:05,280
solid like you're like it should be it
810
00:41:05,280 --> 00:41:07,599
could be under extrusion
811
00:41:07,599 --> 00:41:09,520
it could be a heat issue it's causing a
812
00:41:09,520 --> 00:41:11,200
partial clog so you're not actually
813
00:41:11,200 --> 00:41:14,000
getting a full print
814
00:41:14,000 --> 00:41:15,520
it's one of the things you may be
815
00:41:15,520 --> 00:41:18,550
running into
816
00:41:18,560 --> 00:41:20,400
very common issue especially if it's a
817
00:41:20,400 --> 00:41:23,599
filament you haven't worked with
818
00:41:23,599 --> 00:41:28,150
not a familiar brand i'm one of those
819
00:41:28,160 --> 00:41:30,240
i'm one of those um
820
00:41:30,240 --> 00:41:32,720
if i don't know the brand i i'm pretty
821
00:41:32,720 --> 00:41:35,200
consistent with what i print with
822
00:41:35,200 --> 00:41:38,160
filament wise i love using inland pla
823
00:41:38,160 --> 00:41:40,079
from micro center
824
00:41:40,079 --> 00:41:44,390
it's very consistent works very well
825
00:41:44,400 --> 00:41:47,589
um
826
00:41:47,599 --> 00:41:48,400
and
827
00:41:48,400 --> 00:41:50,560
my profile is pretty tried and true for
828
00:41:50,560 --> 00:41:51,200
it
829
00:41:51,200 --> 00:41:52,720
because most of stuff i print with is
830
00:41:52,720 --> 00:41:54,720
pla plus
831
00:41:54,720 --> 00:41:59,109
from them
832
00:41:59,119 --> 00:42:01,280
like i said i'm not too terribly worried
833
00:42:01,280 --> 00:42:03,599
about detail right now
834
00:42:03,599 --> 00:42:06,079
because i'm bringing in that black base
835
00:42:06,079 --> 00:42:07,599
layer
836
00:42:07,599 --> 00:42:09,119
then i'm going to build the silvers and
837
00:42:09,119 --> 00:42:13,109
stuff out on top of
838
00:42:13,119 --> 00:42:14,400
because that's the fun with building
839
00:42:14,400 --> 00:42:17,280
like silvers and stuff like that
840
00:42:17,280 --> 00:42:20,790
is uh
841
00:42:20,800 --> 00:42:23,040
i can do a lot especially even with this
842
00:42:23,040 --> 00:42:24,560
white coming through and stuff like that
843
00:42:24,560 --> 00:42:28,390
some of it's the pla some of it's
844
00:42:28,400 --> 00:42:30,560
the priming job is not the best some of
845
00:42:30,560 --> 00:42:32,319
it's just contexture and i'm using a
846
00:42:32,319 --> 00:42:34,000
brush that's way too bright big and
847
00:42:34,000 --> 00:42:35,119
ratty
848
00:42:35,119 --> 00:42:36,000
um
849
00:42:36,000 --> 00:42:37,760
but it's basically letting me bring
850
00:42:37,760 --> 00:42:39,520
start bringing in some of the base
851
00:42:39,520 --> 00:42:40,880
coloring to it
852
00:42:40,880 --> 00:42:41,920
um
853
00:42:41,920 --> 00:42:44,960
and i'm using old paint so it's probably
854
00:42:44,960 --> 00:42:51,670
not the uh not
855
00:42:51,680 --> 00:42:53,839
yeah that's the inland pla two days if
856
00:42:53,839 --> 00:42:55,520
that's what you're using yeah that
857
00:42:55,520 --> 00:42:58,319
inland stuff is fantastic and once you
858
00:42:58,319 --> 00:43:00,720
got a good profile it works really
859
00:43:00,720 --> 00:43:05,510
really really well
860
00:43:05,520 --> 00:43:10,069
you can get it off
861
00:43:10,079 --> 00:43:12,880
you may not need to change the end
862
00:43:12,880 --> 00:43:13,839
um
863
00:43:13,839 --> 00:43:15,920
but if you are getting a clog you may
864
00:43:15,920 --> 00:43:17,440
want to actually
865
00:43:17,440 --> 00:43:19,520
possibly change the nozzle
866
00:43:19,520 --> 00:43:21,280
and then maybe even consider pulling
867
00:43:21,280 --> 00:43:23,119
your boating bowden tube taking a look
868
00:43:23,119 --> 00:43:24,400
make sure you're not going to clog
869
00:43:24,400 --> 00:43:29,589
building up in the bowden tube
870
00:43:29,599 --> 00:43:30,800
because that
871
00:43:30,800 --> 00:43:32,560
that has happened to me before where
872
00:43:32,560 --> 00:43:34,240
it's actually the problem is the bowden
873
00:43:34,240 --> 00:43:35,839
tube not
874
00:43:35,839 --> 00:43:38,079
not the hot end
875
00:43:38,079 --> 00:43:39,760
it's very disappointing when i run into
876
00:43:39,760 --> 00:43:41,200
that problem because it's usually the
877
00:43:41,200 --> 00:43:43,520
last thing i try sometimes
878
00:43:43,520 --> 00:43:45,680
um nozzles they're cheap
879
00:43:45,680 --> 00:43:47,200
they're changeable
880
00:43:47,200 --> 00:43:48,880
so changing out
881
00:43:48,880 --> 00:43:52,079
changing out a nozzle usually is not a
882
00:43:52,079 --> 00:43:54,480
not an end game for me i i
883
00:43:54,480 --> 00:43:56,240
i'm pretty willy-nilly on changing out
884
00:43:56,240 --> 00:44:01,270
nozzles
885
00:44:01,280 --> 00:44:03,200
so
886
00:44:03,200 --> 00:44:08,069
um
887
00:44:08,079 --> 00:44:09,359
and all i'm doing with the distilled
888
00:44:09,359 --> 00:44:10,880
water with the paint guys is just trying
889
00:44:10,880 --> 00:44:12,160
to bring it
890
00:44:12,160 --> 00:44:14,960
back to life a little bit
891
00:44:14,960 --> 00:44:17,119
to kind of give it a paintable texture
892
00:44:17,119 --> 00:44:18,160
i know
893
00:44:18,160 --> 00:44:19,839
like that missile launcher the white is
894
00:44:19,839 --> 00:44:22,000
showing through
895
00:44:22,000 --> 00:44:23,920
i don't really care that it's showing
896
00:44:23,920 --> 00:44:25,119
through
897
00:44:25,119 --> 00:44:26,720
it actually is going to kind of play a
898
00:44:26,720 --> 00:44:29,920
little bit to my advantage
899
00:44:29,920 --> 00:44:31,440
and the fact that this black is laying
900
00:44:31,440 --> 00:44:33,280
down kind of smoky
901
00:44:33,280 --> 00:44:35,119
is a okay with me as well because i'm
902
00:44:35,119 --> 00:44:38,319
painting missile launchers right now so
903
00:44:38,319 --> 00:44:40,079
they're gonna look
904
00:44:40,079 --> 00:44:43,750
used
905
00:44:43,760 --> 00:44:44,880
so
906
00:44:44,880 --> 00:44:46,160
um but
907
00:44:46,160 --> 00:44:48,480
two days did you change a color of the
908
00:44:48,480 --> 00:44:50,160
filament that you use from what you
909
00:44:50,160 --> 00:44:52,000
usually print like did you get an orange
910
00:44:52,000 --> 00:44:54,000
or something like that because sometimes
911
00:44:54,000 --> 00:44:56,480
i have learned with the colors
912
00:44:56,480 --> 00:44:59,750
that it uh
913
00:44:59,760 --> 00:45:03,440
it can sometimes like orange
914
00:45:03,440 --> 00:45:05,200
i usually have to heat it up a little a
915
00:45:05,200 --> 00:45:06,880
couple degrees
916
00:45:06,880 --> 00:45:09,200
because inland pla i usually run it at a
917
00:45:09,200 --> 00:45:13,200
215 temperature is my usual
918
00:45:13,200 --> 00:45:14,720
but sometimes i'll have to bump it up a
919
00:45:14,720 --> 00:45:16,079
little bit
920
00:45:16,079 --> 00:45:18,880
uh
921
00:45:18,880 --> 00:45:20,480
i have to bump it up a little bit higher
922
00:45:20,480 --> 00:45:24,470
to kind of give
923
00:45:24,480 --> 00:45:26,480
give it some better texture
924
00:45:26,480 --> 00:45:27,599
so
925
00:45:27,599 --> 00:45:29,119
definitely kind of making that mad cat
926
00:45:29,119 --> 00:45:30,800
coming together
927
00:45:30,800 --> 00:45:33,280
giving it some color um
928
00:45:33,280 --> 00:45:35,119
what i'll do i don't know why i just did
929
00:45:35,119 --> 00:45:37,280
that um is i'll come in with some
930
00:45:37,280 --> 00:45:39,760
burnished metal over the black
931
00:45:39,760 --> 00:45:41,520
i'm same with these guns give it a real
932
00:45:41,520 --> 00:45:43,599
kind of metallic look come back into
933
00:45:43,599 --> 00:45:46,400
these seam lines i wanna
934
00:45:46,400 --> 00:45:49,200
so i'm gonna use my good old friend
935
00:45:49,200 --> 00:45:51,200
silly putty to help me out with the camo
936
00:45:51,200 --> 00:46:00,309
pattern across this
937
00:46:00,319 --> 00:46:02,480
uh sometimes that happens with shipping
938
00:46:02,480 --> 00:46:05,119
uh the vacuum seal bag will
939
00:46:05,119 --> 00:46:06,160
inflate
940
00:46:06,160 --> 00:46:08,800
um kind of one of those things uh
941
00:46:08,800 --> 00:46:11,040
is it being brittle and breaking
942
00:46:11,040 --> 00:46:12,800
because if it's bit brittle and breaking
943
00:46:12,800 --> 00:46:13,920
then yeah you've definitely got a
944
00:46:13,920 --> 00:46:16,870
moisture problem
945
00:46:16,880 --> 00:46:19,359
but clogging uh
946
00:46:19,359 --> 00:46:25,190
not so much
947
00:46:25,200 --> 00:46:26,560
i mean i'm not i'm not saying it's not
948
00:46:26,560 --> 00:46:29,040
possible at all
949
00:46:29,040 --> 00:46:30,480
believe me i'm
950
00:46:30,480 --> 00:46:34,160
wanting to really kind of get started
951
00:46:34,160 --> 00:46:36,400
but i've got another trip i'm going on
952
00:46:36,400 --> 00:46:39,200
this weekend and then i will uh
953
00:46:39,200 --> 00:46:42,800
i'll get started with my uh
954
00:46:42,800 --> 00:46:45,520
with my real printing i've got a lot i
955
00:46:45,520 --> 00:46:48,480
got to get printing onto
956
00:46:48,480 --> 00:46:50,160
between
957
00:46:50,160 --> 00:46:52,560
the move the construction i had a little
958
00:46:52,560 --> 00:46:57,750
bit of an illness in there um
959
00:46:57,760 --> 00:46:59,839
we're starting to get back on track
960
00:46:59,839 --> 00:47:01,280
so
961
00:47:01,280 --> 00:47:03,680
a couple trips
962
00:47:03,680 --> 00:47:05,839
that were planned ahead of course moving
963
00:47:05,839 --> 00:47:10,230
is always fun
964
00:47:10,240 --> 00:47:11,359
uh
965
00:47:11,359 --> 00:47:13,280
if you don't know me that is my attempt
966
00:47:13,280 --> 00:47:15,760
at sarcasm
967
00:47:15,760 --> 00:47:18,069
uh
968
00:47:18,079 --> 00:47:19,760
don't get me wrong i'm starting to love
969
00:47:19,760 --> 00:47:21,520
the new house
970
00:47:21,520 --> 00:47:24,640
um but it's just kind of
971
00:47:24,640 --> 00:47:26,560
it's been a lot of change a lot of work
972
00:47:26,560 --> 00:47:35,910
real quick
973
00:47:35,920 --> 00:47:38,319
yes you gotta bump the t for silk you've
974
00:47:38,319 --> 00:47:40,400
got to bump it and slow it
975
00:47:40,400 --> 00:47:42,400
um your extruder you're basically the
976
00:47:42,400 --> 00:47:45,839
silk gets real can get real gnarly and
977
00:47:45,839 --> 00:47:49,200
gum everything up real quick
978
00:47:49,200 --> 00:47:51,599
so silk is uh
979
00:47:51,599 --> 00:47:54,480
i kind of tend to treat silk
980
00:47:54,480 --> 00:47:57,430
like uh
981
00:47:57,440 --> 00:47:59,359
what am i looking for in the word
982
00:47:59,359 --> 00:48:02,870
i usually treat silk
983
00:48:02,880 --> 00:48:05,680
like petg
984
00:48:05,680 --> 00:48:08,000
so i usually bump my temp up
985
00:48:08,000 --> 00:48:10,480
definitely higher than what i'm used to
986
00:48:10,480 --> 00:48:12,400
what i would for pla
987
00:48:12,400 --> 00:48:16,240
and uh sometimes rarely i have to bump
988
00:48:16,240 --> 00:48:21,109
up my
989
00:48:21,119 --> 00:48:27,510
um bad temperature sometimes
990
00:48:27,520 --> 00:48:29,200
which i've been using my perugia here
991
00:48:29,200 --> 00:48:30,720
since i've gotten here my perugia is
992
00:48:30,720 --> 00:48:32,880
doing fine my odins are
993
00:48:32,880 --> 00:48:35,200
doing okay
994
00:48:35,200 --> 00:48:36,720
i do have some setting adjustments i
995
00:48:36,720 --> 00:48:39,040
need to do but that's we can do that on
996
00:48:39,040 --> 00:48:41,040
we'll do that on another stream
997
00:48:41,040 --> 00:48:43,040
i really just needed some therapy of the
998
00:48:43,040 --> 00:48:45,200
paintbrush i really haven't
999
00:48:45,200 --> 00:48:47,280
sat down and done this this is the first
1000
00:48:47,280 --> 00:48:49,920
time i've painted since
1001
00:48:49,920 --> 00:48:51,920
well whenever i painted last on stream
1002
00:48:51,920 --> 00:48:53,359
so
1003
00:48:53,359 --> 00:48:55,680
been a while
1004
00:48:55,680 --> 00:48:57,359
but that laser engraver is going to be
1005
00:48:57,359 --> 00:48:59,760
fun and then the cricut is just going to
1006
00:48:59,760 --> 00:49:00,640
make
1007
00:49:00,640 --> 00:49:03,599
like emblems on here just so simple
1008
00:49:03,599 --> 00:49:06,000
um instead of water transfer decals i
1009
00:49:06,000 --> 00:49:07,760
can actually do vinyl
1010
00:49:07,760 --> 00:49:09,359
and stuff like that
1011
00:49:09,359 --> 00:49:12,160
or just stencil it and apply the stencil
1012
00:49:12,160 --> 00:49:14,950
and
1013
00:49:14,960 --> 00:49:28,549
go from there so
1014
00:49:28,559 --> 00:49:30,160
all right that's just kind of giving us
1015
00:49:30,160 --> 00:49:31,359
a
1016
00:49:31,359 --> 00:49:33,040
bit of a base layer is all i'm after
1017
00:49:33,040 --> 00:49:34,000
right now
1018
00:49:34,000 --> 00:49:36,480
so base coating it
1019
00:49:36,480 --> 00:49:37,599
um
1020
00:49:37,599 --> 00:49:41,750
is kind of the goal
1021
00:49:41,760 --> 00:49:43,920
kind of thinning this paint out to get
1022
00:49:43,920 --> 00:49:48,870
it to be able to apply
1023
00:49:48,880 --> 00:49:50,559
i'm not too worried about staying in the
1024
00:49:50,559 --> 00:49:53,200
lines right now that'll clean up and
1025
00:49:53,200 --> 00:49:54,720
i'll give some depth and texture to the
1026
00:49:54,720 --> 00:50:09,190
model as we go
1027
00:50:09,200 --> 00:50:10,800
i'm kind of pulling in
1028
00:50:10,800 --> 00:50:12,960
so for back here i'm kind of pulling in
1029
00:50:12,960 --> 00:50:13,839
the
1030
00:50:13,839 --> 00:50:15,680
layer lines
1031
00:50:15,680 --> 00:50:17,920
i'm leaving them on purpose
1032
00:50:17,920 --> 00:50:20,079
it is a great way to give lift and
1033
00:50:20,079 --> 00:50:23,119
painted effect for wiring
1034
00:50:23,119 --> 00:50:29,270
and with this being a massive machine
1035
00:50:29,280 --> 00:50:30,000
it
1036
00:50:30,000 --> 00:50:37,270
gives me some room to have some fun
1037
00:50:37,280 --> 00:50:39,280
i'm not just overly concerned like i
1038
00:50:39,280 --> 00:50:46,390
said base coating
1039
00:50:46,400 --> 00:50:50,069
oh two days yes
1040
00:50:50,079 --> 00:50:53,280
warhammer is very much the rabbit hole
1041
00:50:53,280 --> 00:50:58,160
did i ever show the finished tesseract
1042
00:50:58,160 --> 00:51:00,000
that i was working on i know i painted
1043
00:51:00,000 --> 00:51:02,240
it on stream several times i don't know
1044
00:51:02,240 --> 00:51:09,670
if i ever showed it
1045
00:51:09,680 --> 00:51:14,710
i have to do that
1046
00:51:14,720 --> 00:51:15,680
once i
1047
00:51:15,680 --> 00:51:18,470
find it
1048
00:51:18,480 --> 00:51:20,960
now warhammer can be fun
1049
00:51:20,960 --> 00:51:23,520
definitely if you do it the
1050
00:51:23,520 --> 00:51:25,920
right way not just start 3d printing a
1051
00:51:25,920 --> 00:51:28,079
bunch of warhammer guys don't do that
1052
00:51:28,079 --> 00:51:29,839
that's not
1053
00:51:29,839 --> 00:51:35,430
not the way you do it
1054
00:51:35,440 --> 00:51:37,680
all right
1055
00:51:37,680 --> 00:51:41,829
some nice base coating right there
1056
00:51:41,839 --> 00:51:45,349
get a better brush
1057
00:51:45,359 --> 00:51:47,520
oh i don't even have a paper towel
1058
00:51:47,520 --> 00:51:50,480
i'm not prepared to paint
1059
00:51:50,480 --> 00:51:52,240
time is it i've still got a little bit
1060
00:51:52,240 --> 00:51:54,559
of time left till i have to
1061
00:51:54,559 --> 00:52:00,790
go do work things
1062
00:52:00,800 --> 00:52:01,760
actually
1063
00:52:01,760 --> 00:52:03,440
we got the black going
1064
00:52:03,440 --> 00:52:05,280
i don't know why i pulled this out that
1065
00:52:05,280 --> 00:52:09,030
goes to the small one
1066
00:52:09,040 --> 00:52:11,280
before next time i will redo the wet
1067
00:52:11,280 --> 00:52:13,119
palette
1068
00:52:13,119 --> 00:52:14,559
but
1069
00:52:14,559 --> 00:52:16,400
so model building
1070
00:52:16,400 --> 00:52:18,160
is definitely something that's going to
1071
00:52:18,160 --> 00:52:26,309
get further onto this channel
1072
00:52:26,319 --> 00:52:29,190
oh
1073
00:52:29,200 --> 00:52:32,000
and that
1074
00:52:32,000 --> 00:52:36,150
is my tesseract arc
1075
00:52:36,160 --> 00:52:38,240
and you can see that's my hand
1076
00:52:38,240 --> 00:52:41,440
so one of these is the size of my hand
1077
00:52:41,440 --> 00:52:44,000
and you've got the necron
1078
00:52:44,000 --> 00:52:45,760
inside
1079
00:52:45,760 --> 00:52:48,720
the greens the bronzes
1080
00:52:48,720 --> 00:52:51,119
the greenish washing i want to take the
1081
00:52:51,119 --> 00:52:52,240
airbrush
1082
00:52:52,240 --> 00:52:55,040
come in underneath and give a green hue
1083
00:52:55,040 --> 00:52:57,040
inside each of these
1084
00:52:57,040 --> 00:53:00,240
paddles i just haven't done that
1085
00:53:00,240 --> 00:53:02,559
but yeah you can definitely tell
1086
00:53:02,559 --> 00:53:05,200
this was a major
1087
00:53:05,200 --> 00:53:09,829
work with the gold inlays
1088
00:53:09,839 --> 00:53:12,960
the bronzing the silvers
1089
00:53:12,960 --> 00:53:15,520
just a lot of work went into this one so
1090
00:53:15,520 --> 00:53:19,670
and then basing
1091
00:53:19,680 --> 00:53:21,440
yeah this model
1092
00:53:21,440 --> 00:53:24,160
just the model costs 150
1093
00:53:24,160 --> 00:53:26,400
so
1094
00:53:26,400 --> 00:53:28,240
but you can see there is just a lot of
1095
00:53:28,240 --> 00:53:30,400
detail you can build this one in two
1096
00:53:30,400 --> 00:53:31,839
ways you can build it close you can
1097
00:53:31,839 --> 00:53:35,200
build it open like this i chose the open
1098
00:53:35,200 --> 00:53:37,920
um the camera doesn't give it
1099
00:53:37,920 --> 00:53:39,280
the justice
1100
00:53:39,280 --> 00:53:42,800
the detail on the figurine itself
1101
00:53:42,800 --> 00:53:45,200
is really nice
1102
00:53:45,200 --> 00:53:48,720
but uh yeah this was a uh
1103
00:53:48,720 --> 00:53:50,640
i probably have 80 hours in painting
1104
00:53:50,640 --> 00:53:53,520
this and this is all hand painted
1105
00:53:53,520 --> 00:53:56,960
there was no airbrush used here
1106
00:53:56,960 --> 00:53:57,760
so
1107
00:53:57,760 --> 00:53:59,440
luckily now i have my airbrush station
1108
00:53:59,440 --> 00:54:00,480
so he
1109
00:54:00,480 --> 00:54:03,839
that's coming coming in for big use
1110
00:54:03,839 --> 00:54:11,829
so
1111
00:54:11,839 --> 00:54:13,920
i've still got a ton of model projects
1112
00:54:13,920 --> 00:54:16,880
up here the to work on my klingon
1113
00:54:16,880 --> 00:54:18,400
the king
1114
00:54:18,400 --> 00:54:20,720
katinga still needs work i got tons of
1115
00:54:20,720 --> 00:54:22,960
warhammer models over here
1116
00:54:22,960 --> 00:54:24,880
we're going to get back to modeling
1117
00:54:24,880 --> 00:54:26,640
modeling is definitely the second
1118
00:54:26,640 --> 00:54:28,400
channel
1119
00:54:28,400 --> 00:54:30,160
when i launch it
1120
00:54:30,160 --> 00:54:32,000
i want to launch it with five videos
1121
00:54:32,000 --> 00:54:33,920
right out the gate
1122
00:54:33,920 --> 00:54:36,240
i have two of them done
1123
00:54:36,240 --> 00:54:38,400
so i'm still very much working but i'm
1124
00:54:38,400 --> 00:54:39,760
going to talk about
1125
00:54:39,760 --> 00:54:40,800
you know
1126
00:54:40,800 --> 00:54:42,800
why would you use silly putty with
1127
00:54:42,800 --> 00:54:45,520
airbrushing and stuff like that because
1128
00:54:45,520 --> 00:54:49,430
it's a great tool
1129
00:54:49,440 --> 00:54:52,480
or you know step up to the higher
1130
00:54:52,480 --> 00:54:55,520
ak camouflage putty plastic which is the
1131
00:54:55,520 --> 00:54:56,319
same
1132
00:54:56,319 --> 00:54:59,119
as kind of using the silly putty i've
1133
00:54:59,119 --> 00:55:00,880
got a model of the alabama that i want
1134
00:55:00,880 --> 00:55:02,319
to make a diorama with the water
1135
00:55:02,319 --> 00:55:04,880
textures
1136
00:55:04,880 --> 00:55:06,559
there's just so much still to do that i
1137
00:55:06,559 --> 00:55:08,240
just have not had time
1138
00:55:08,240 --> 00:55:11,119
a gaming table oh man that's that's
1139
00:55:11,119 --> 00:55:12,880
going to be fun uh
1140
00:55:12,880 --> 00:55:14,559
wish i had room for something like that
1141
00:55:14,559 --> 00:55:15,760
well i
1142
00:55:15,760 --> 00:55:17,119
probably do but
1143
00:55:17,119 --> 00:55:20,800
um then i want to get to even these
1144
00:55:20,800 --> 00:55:23,040
where it's these galvanized star trek
1145
00:55:23,040 --> 00:55:25,200
starship models
1146
00:55:25,200 --> 00:55:26,960
that i've picked up
1147
00:55:26,960 --> 00:55:29,040
um i even actually i'm really kind of
1148
00:55:29,040 --> 00:55:30,400
getting the lord of the rings i've got
1149
00:55:30,400 --> 00:55:33,440
some soldiers of gondor coming
1150
00:55:33,440 --> 00:55:35,599
um
1151
00:55:35,599 --> 00:55:36,960
i'm not sure if it even picked up the
1152
00:55:36,960 --> 00:55:39,680
helicopter flying over my house
1153
00:55:39,680 --> 00:55:41,040
but
1154
00:55:41,040 --> 00:55:42,160
um
1155
00:55:42,160 --> 00:55:46,950
it's kind of just one of those things
1156
00:55:46,960 --> 00:55:49,440
yeah um that one's the federation
1157
00:55:49,440 --> 00:55:53,920
dreadnought and i also have just the
1158
00:55:53,920 --> 00:55:56,079
um the federation battle cruiser which
1159
00:55:56,079 --> 00:55:57,599
is
1160
00:55:57,599 --> 00:55:58,720
pretty sure this is just the
1161
00:55:58,720 --> 00:56:00,480
constitution class
1162
00:56:00,480 --> 00:56:03,599
but these are the metallic galvanized
1163
00:56:03,599 --> 00:56:05,839
um federation dreadnought and federation
1164
00:56:05,839 --> 00:56:07,520
this just constitution class battle
1165
00:56:07,520 --> 00:56:08,480
cruiser
1166
00:56:08,480 --> 00:56:10,400
but uh you know this kind of stuff that
1167
00:56:10,400 --> 00:56:12,240
i'm gonna be bringing over onto that
1168
00:56:12,240 --> 00:56:13,119
channel
1169
00:56:13,119 --> 00:56:14,480
so
1170
00:56:14,480 --> 00:56:19,349
i mean come on i've even got
1171
00:56:19,359 --> 00:56:22,400
how about some krieg
1172
00:56:22,400 --> 00:56:23,440
um
1173
00:56:23,440 --> 00:56:25,200
so i've got a bunch of the creek
1174
00:56:25,200 --> 00:56:27,839
troopers i've got one of their big this
1175
00:56:27,839 --> 00:56:30,400
is the heavy art shaker artillery for
1176
00:56:30,400 --> 00:56:32,400
them from forge world
1177
00:56:32,400 --> 00:56:35,520
i've got a lot that i need to
1178
00:56:35,520 --> 00:56:38,000
start working on
1179
00:56:38,000 --> 00:56:40,079
and honestly there is a whole tower over
1180
00:56:40,079 --> 00:56:44,240
here of about 12 drawers
1181
00:56:44,240 --> 00:56:45,760
now i'll just pull one out here's
1182
00:56:45,760 --> 00:56:46,880
necrons
1183
00:56:46,880 --> 00:56:48,319
that
1184
00:56:48,319 --> 00:56:51,430
just need love
1185
00:56:51,440 --> 00:56:53,200
and are gonna get it on that modeling
1186
00:56:53,200 --> 00:56:56,309
channel so
1187
00:56:56,319 --> 00:57:02,950
oh picard trailer
1188
00:57:02,960 --> 00:57:05,990
the titan a
1189
00:57:06,000 --> 00:57:08,079
i don't know man
1190
00:57:08,079 --> 00:57:09,760
i don't know
1191
00:57:09,760 --> 00:57:13,190
i'm a little
1192
00:57:13,200 --> 00:57:14,799
on the fence about it
1193
00:57:14,799 --> 00:57:16,400
so but we'll see
1194
00:57:16,400 --> 00:57:17,839
all the crew coming together that's
1195
00:57:17,839 --> 00:57:20,400
awesome jordy being a commodore that's
1196
00:57:20,400 --> 00:57:22,079
pretty cool
1197
00:57:22,079 --> 00:57:25,520
um yeah so a lot going on you guys can
1198
00:57:25,520 --> 00:57:27,040
see some of the stuff behind me i got
1199
00:57:27,040 --> 00:57:28,400
the painting booth is right there with
1200
00:57:28,400 --> 00:57:30,240
my airbrushes
1201
00:57:30,240 --> 00:57:33,280
i got models up there legos all kinds of
1202
00:57:33,280 --> 00:57:36,079
stuff but stick around there is a tour
1203
00:57:36,079 --> 00:57:37,839
going to be coming up here probably in
1204
00:57:37,839 --> 00:57:39,440
the next month
1205
00:57:39,440 --> 00:57:41,119
of
1206
00:57:41,119 --> 00:57:43,200
this area for the modeling channel the
1207
00:57:43,200 --> 00:57:44,799
paints all that stuff that'll be the
1208
00:57:44,799 --> 00:57:46,319
shop tour
1209
00:57:46,319 --> 00:57:47,920
um
1210
00:57:47,920 --> 00:57:49,520
there's going to be a lot kind of coming
1211
00:57:49,520 --> 00:57:50,400
up
1212
00:57:50,400 --> 00:57:52,160
so the next couple months are going to
1213
00:57:52,160 --> 00:57:55,040
get hectic around here
1214
00:57:55,040 --> 00:57:56,720
the only bad thing is the halloween
1215
00:57:56,720 --> 00:57:58,400
costume kind of got scrapped for this
1216
00:57:58,400 --> 00:58:01,040
year and in a way i'm okay
1217
00:58:01,040 --> 00:58:02,960
with it
1218
00:58:02,960 --> 00:58:04,799
i don't know i like the inquiry class
1219
00:58:04,799 --> 00:58:08,079
two days and you know the la sirena let
1220
00:58:08,079 --> 00:58:13,190
her rest in peace we got rid of her
1221
00:58:13,200 --> 00:58:16,480
last season so i'm okay with that so
1222
00:58:16,480 --> 00:58:18,400
kind of one of those things it's uh it
1223
00:58:18,400 --> 00:58:20,240
is what it is
1224
00:58:20,240 --> 00:58:21,599
but uh
1225
00:58:21,599 --> 00:58:23,760
definitely kind of
1226
00:58:23,760 --> 00:58:26,079
it's growing it's one of those things
1227
00:58:26,079 --> 00:58:28,160
that we just got to keep looking at it
1228
00:58:28,160 --> 00:58:30,559
and see what's going on so
1229
00:58:30,559 --> 00:58:34,480
um it's definitely a step up but it's
1230
00:58:34,480 --> 00:58:36,559
we had a lot of ships in that new
1231
00:58:36,559 --> 00:58:38,319
federation fleet
1232
00:58:38,319 --> 00:58:40,720
and now we're doing a titan a that looks
1233
00:58:40,720 --> 00:58:42,640
like a constitution class that's just
1234
00:58:42,640 --> 00:58:44,000
been souped up
1235
00:58:44,000 --> 00:58:47,280
or it's a new constitution class
1236
00:58:47,280 --> 00:58:49,359
um i think we could have done better
1237
00:58:49,359 --> 00:58:52,720
than that but hey you know
1238
00:58:52,720 --> 00:58:55,760
you know i'm just i'm just watching
1239
00:58:55,760 --> 00:58:57,040
um
1240
00:58:57,040 --> 00:58:58,559
the inquiry class would have been cool
1241
00:58:58,559 --> 00:59:00,240
to actually you know take the zheng hey
1242
00:59:00,240 --> 00:59:02,400
and actually see what it could do that
1243
00:59:02,400 --> 00:59:05,040
would been kind of nice
1244
00:59:05,040 --> 00:59:10,069
but we put a laser engraver together
1245
00:59:10,079 --> 00:59:13,119
so there's actually talk about seeing
1246
00:59:13,119 --> 00:59:15,599
the enterprise d in
1247
00:59:15,599 --> 00:59:17,119
in this show
1248
00:59:17,119 --> 00:59:20,079
so there was talk about the old bridge
1249
00:59:20,079 --> 00:59:21,839
so i'm curious what we're gonna what
1250
00:59:21,839 --> 00:59:23,520
we're gonna see there
1251
00:59:23,520 --> 00:59:28,000
so and stick around because
1252
00:59:28,000 --> 00:59:32,230
oh where is it
1253
00:59:32,240 --> 00:59:35,670
oh
1254
00:59:35,680 --> 00:59:37,200
so let's you know we're just going to
1255
00:59:37,200 --> 00:59:38,160
have some fun we're going to talk about
1256
00:59:38,160 --> 00:59:40,480
the modeling channel a little bit more
1257
00:59:40,480 --> 00:59:45,589
so here's one project that's coming up
1258
00:59:45,599 --> 00:59:47,280
i've got
1259
00:59:47,280 --> 00:59:50,160
a ambassador class that has been primed
1260
00:59:50,160 --> 00:59:52,160
that needs to be built
1261
00:59:52,160 --> 01:00:04,470
so we got that
1262
01:00:04,480 --> 01:00:06,960
um the channel grew big enough two days
1263
01:00:06,960 --> 01:00:09,200
that i'm able to have they will put ads
1264
01:00:09,200 --> 01:00:11,280
in my stream
1265
01:00:11,280 --> 01:00:13,280
um that's a new thing we qualified for
1266
01:00:13,280 --> 01:00:16,559
when we got past five thousand
1267
01:00:16,559 --> 01:00:19,680
so another project
1268
01:00:19,680 --> 01:00:21,280
in the midst
1269
01:00:21,280 --> 01:00:23,520
is i've got three
1270
01:00:23,520 --> 01:00:25,839
excelsior classes that need to be
1271
01:00:25,839 --> 01:00:29,670
finished
1272
01:00:29,680 --> 01:00:31,440
so that's going to be coming over to the
1273
01:00:31,440 --> 01:00:35,670
modeling channel
1274
01:00:35,680 --> 01:00:36,960
this one you're really going to like
1275
01:00:36,960 --> 01:00:43,990
today
1276
01:00:44,000 --> 01:00:47,670
so
1277
01:00:47,680 --> 01:00:51,599
uh the oaths o8 ms team
1278
01:00:51,599 --> 01:00:54,240
so i've got their three gundams
1279
01:00:54,240 --> 01:00:56,160
two of the 79s and i've got the easy
1280
01:00:56,160 --> 01:00:57,200
eight
1281
01:00:57,200 --> 01:00:58,640
um
1282
01:00:58,640 --> 01:01:01,200
that really needs some desperate help
1283
01:01:01,200 --> 01:01:04,079
so that's a project with terrain that i
1284
01:01:04,079 --> 01:01:05,839
plan on doing over on the other channel
1285
01:01:05,839 --> 01:01:07,440
to have those three
1286
01:01:07,440 --> 01:01:09,839
3d printing may get to play a game in
1287
01:01:09,839 --> 01:01:11,040
this
1288
01:01:11,040 --> 01:01:14,950
and uh
1289
01:01:14,960 --> 01:01:16,880
well 3d printing will play a game in it
1290
01:01:16,880 --> 01:01:19,040
in the terrain and also
1291
01:01:19,040 --> 01:01:22,309
the maybe the hover truck
1292
01:01:22,319 --> 01:01:25,680
hey sean reeve 13 how's it going
1293
01:01:25,680 --> 01:01:26,480
then
1294
01:01:26,480 --> 01:01:29,200
the last one that's kind of in the
1295
01:01:29,200 --> 01:01:33,670
planned model line
1296
01:01:33,680 --> 01:01:35,440
is the sovereign class
1297
01:01:35,440 --> 01:01:36,799
so
1298
01:01:36,799 --> 01:01:39,520
there's a lot of kits that i have lined
1299
01:01:39,520 --> 01:01:42,160
out you guys can tell i put my projects
1300
01:01:42,160 --> 01:01:43,839
in boxes so i can keep everything
1301
01:01:43,839 --> 01:01:44,799
together
1302
01:01:44,799 --> 01:01:51,270
kind of sort them out
1303
01:01:51,280 --> 01:01:53,440
and just make it to where
1304
01:01:53,440 --> 01:01:55,200
i can work on multiple projects and
1305
01:01:55,200 --> 01:01:59,750
rotate all at the same time so
1306
01:01:59,760 --> 01:02:01,839
and luckily those stack really nice
1307
01:02:01,839 --> 01:02:03,359
right under my desk
1308
01:02:03,359 --> 01:02:05,760
i can easily grab a model and just start
1309
01:02:05,760 --> 01:02:08,720
doing model stuff so
1310
01:02:08,720 --> 01:02:09,520
so
1311
01:02:09,520 --> 01:02:12,160
yeah guys that's kind of where we are
1312
01:02:12,160 --> 01:02:15,589
lots coming up
1313
01:02:15,599 --> 01:02:18,480
i got to get a video done for friday
1314
01:02:18,480 --> 01:02:20,960
because i will be out of town on friday
1315
01:02:20,960 --> 01:02:23,359
but uh
1316
01:02:23,359 --> 01:02:24,960
yeah so hopefully it won't be too long
1317
01:02:24,960 --> 01:02:27,359
we're getting back to uh this kind of
1318
01:02:27,359 --> 01:02:29,520
stuff on the channel too
1319
01:02:29,520 --> 01:02:30,319
so
1320
01:02:30,319 --> 01:02:33,040
i had a lot of models that broke and got
1321
01:02:33,040 --> 01:02:34,799
damaged during the move
1322
01:02:34,799 --> 01:02:37,040
so we got to print new versions new
1323
01:02:37,040 --> 01:02:39,680
iterations which would be kind of fun
1324
01:02:39,680 --> 01:02:41,359
and just kind of stuff
1325
01:02:41,359 --> 01:02:42,720
we can all work on and we'll keep
1326
01:02:42,720 --> 01:02:46,950
painting on that mad cat over here too
1327
01:02:46,960 --> 01:02:55,910
so oh i see an fyi
1328
01:02:55,920 --> 01:03:10,950
waiting for it
1329
01:03:10,960 --> 01:03:17,670
but hopefully you guys have enjoyed it
1330
01:03:17,680 --> 01:03:20,079
oh yeah
1331
01:03:20,079 --> 01:03:22,319
printing it and finishing it two whole
1332
01:03:22,319 --> 01:03:24,480
different ballparks
1333
01:03:24,480 --> 01:03:27,119
two whole different ballparks
1334
01:03:27,119 --> 01:03:29,520
now will you still see model finishing
1335
01:03:29,520 --> 01:03:31,200
over on this channel
1336
01:03:31,200 --> 01:03:32,079
yes
1337
01:03:32,079 --> 01:03:34,640
specifically the 3d prints will be
1338
01:03:34,640 --> 01:03:37,359
finished over here
1339
01:03:37,359 --> 01:03:38,400
and then
1340
01:03:38,400 --> 01:03:39,920
the rest of that stuff that you guys
1341
01:03:39,920 --> 01:03:42,319
just saw is all model kits those are not
1342
01:03:42,319 --> 01:03:43,839
3d printed those are kits that i've
1343
01:03:43,839 --> 01:03:45,920
bought and gotten over time
1344
01:03:45,920 --> 01:03:47,440
and
1345
01:03:47,440 --> 01:03:48,799
i just want to start building them i've
1346
01:03:48,799 --> 01:03:50,079
got a whole
1347
01:03:50,079 --> 01:03:52,559
shelf out my garage that's nothing but
1348
01:03:52,559 --> 01:03:53,839
model kits
1349
01:03:53,839 --> 01:03:55,680
and i want to get to work on those
1350
01:03:55,680 --> 01:03:56,480
because
1351
01:03:56,480 --> 01:03:58,640
when we moved oh my goodness i didn't
1352
01:03:58,640 --> 01:04:01,920
realize how many models i had
1353
01:04:01,920 --> 01:04:03,119
so
1354
01:04:03,119 --> 01:04:04,960
um definitely one of those things that's
1355
01:04:04,960 --> 01:04:07,680
got to get moving um
1356
01:04:07,680 --> 01:04:09,760
i'm waiting on it to clear customs right
1357
01:04:09,760 --> 01:04:12,400
now i've got another frozen mega 8k on
1358
01:04:12,400 --> 01:04:14,240
the way so i'll have two of those in my
1359
01:04:14,240 --> 01:04:16,319
shop so we'll definitely be seeing some
1360
01:04:16,319 --> 01:04:19,280
really cool resin 3d prints coming out
1361
01:04:19,280 --> 01:04:22,079
big resin 3d prints
1362
01:04:22,079 --> 01:04:24,960
so we've got a lot of that coming too
1363
01:04:24,960 --> 01:04:26,720
so hopefully next week the print shop
1364
01:04:26,720 --> 01:04:28,880
really can kind of get actually into
1365
01:04:28,880 --> 01:04:30,480
action so
1366
01:04:30,480 --> 01:04:32,319
um right now i'm getting the raspberry
1367
01:04:32,319 --> 01:04:33,920
pi's in place i'm getting all the gear
1368
01:04:33,920 --> 01:04:34,960
going
1369
01:04:34,960 --> 01:04:36,720
and there's just a lot of growth still
1370
01:04:36,720 --> 01:04:38,319
to come um
1371
01:04:38,319 --> 01:04:41,039
to the shop to be completely functional
1372
01:04:41,039 --> 01:04:42,319
again
1373
01:04:42,319 --> 01:04:43,359
so
1374
01:04:43,359 --> 01:04:46,000
because buying one printer try managing
1375
01:04:46,000 --> 01:04:48,799
almost 20 of them it gets very hairy
1376
01:04:48,799 --> 01:04:50,640
very quick and i'm actually that's
1377
01:04:50,640 --> 01:04:53,440
actually me i'm downsizing i think after
1378
01:04:53,440 --> 01:04:56,319
the downsize i'm going to be within 16
1379
01:04:56,319 --> 01:04:58,880
back down to about 15 printers ftm is
1380
01:04:58,880 --> 01:05:00,000
really big
1381
01:05:00,000 --> 01:05:03,039
where res sla is about three or four i'm
1382
01:05:03,039 --> 01:05:04,319
not going to have a whole bunch of them
1383
01:05:04,319 --> 01:05:06,319
around so
1384
01:05:06,319 --> 01:05:08,400
because sla i print faster even the
1385
01:05:08,400 --> 01:05:10,079
larger machine i still print faster than
1386
01:05:10,079 --> 01:05:11,599
i do with fdm
1387
01:05:11,599 --> 01:05:12,559
so
1388
01:05:12,559 --> 01:05:14,720
kind of one of those fun things but guys
1389
01:05:14,720 --> 01:05:15,920
if you're new here make sure you hit the
1390
01:05:15,920 --> 01:05:17,440
subscribe button to see all this cool
1391
01:05:17,440 --> 01:05:20,319
stuff coming um if you haven't make sure
1392
01:05:20,319 --> 01:05:22,960
you hit that subscribe button also you
1393
01:05:22,960 --> 01:05:24,240
know hit that like button help the
1394
01:05:24,240 --> 01:05:26,079
stream out get some more people out here
1395
01:05:26,079 --> 01:05:28,079
to watch it and we're going to do all
1396
01:05:28,079 --> 01:05:29,760
kinds of cool stuff hopefully hopefully
1397
01:05:29,760 --> 01:05:31,280
you guys enjoy it
1398
01:05:31,280 --> 01:05:33,039
um and also if you want to consider
1399
01:05:33,039 --> 01:05:34,400
backing the channel head on over to
1400
01:05:34,400 --> 01:05:36,000
patreon and kind of help us out over
1401
01:05:36,000 --> 01:05:38,720
there too so thank you guys hope you
1402
01:05:38,720 --> 01:05:40,960
have a good night we will see you guys
1403
01:05:40,960 --> 01:05:42,480
next tuesday
1404
01:05:42,480 --> 01:05:56,150
7 15 or 8 15 est so thanks guys
1405
01:05:56,160 --> 01:06:19,670
so
1406
01:06:19,680 --> 01:06:21,760
you87017
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.