Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:14,630 --> 00:00:21,510
Welcome to the next lesson Seamans TIAA TIAA stands for total integrated automation and this lesson
2
00:00:21,530 --> 00:00:23,840
really understand what is a theme and CIA.
3
00:00:23,840 --> 00:00:29,300
One of the radius features of the CIA and we have a live demonstration of how to use the TIAA link with
4
00:00:29,300 --> 00:00:30,240
the PC.
5
00:00:30,490 --> 00:00:32,110
Then we will summarize this lesson.
6
00:00:32,130 --> 00:00:32,960
All right.
7
00:00:32,960 --> 00:00:39,290
So let's start with introduction to TIAA Because it as a modular Balsall and easy to use.
8
00:00:39,460 --> 00:00:39,960
OK.
9
00:00:40,190 --> 00:00:44,260
If we have a system installed with the software what you can do with the software.
10
00:00:44,260 --> 00:00:51,530
Let's see the latest features for instance it can integrate both basic ballasts and HDMI and seven to
11
00:00:51,530 --> 00:00:52,510
eight hundred controllers.
12
00:00:52,580 --> 00:00:56,350
You can use various other controllers as well but it can integrate poor.
13
00:00:56,390 --> 00:00:59,080
You don't need any extra software for it.
14
00:00:59,120 --> 00:01:03,530
In my we can program and control are we can integrate these two.
15
00:01:03,680 --> 00:01:08,990
We can you get to configure their Internet communications in the same software.
16
00:01:09,440 --> 00:01:14,170
So along with that let's see what other the other features starting with the networking.
17
00:01:14,180 --> 00:01:20,660
Now you don't have to have any extraneous cables for the networking of your devices because these to
18
00:01:20,660 --> 00:01:23,910
support your LAN cable like this one.
19
00:01:24,050 --> 00:01:30,840
So there's two supports Ethernet networking so that you can configure that NTIA in the same software.
20
00:01:31,250 --> 00:01:36,980
Then you can also program your drives using drive and motion integration plugins which are in the Siemens
21
00:01:36,980 --> 00:01:37,420
TIAA.
22
00:01:37,430 --> 00:01:44,090
You don't need any extra software for that that you can have some moderate danity hardware modern inanity
23
00:01:44,520 --> 00:01:50,810
in the TIAA it means you can link many other devices in the same platform you can configure that you
24
00:01:50,810 --> 00:01:56,330
can configure their inputs and outputs in the same software using this function then you're going to
25
00:01:56,450 --> 00:02:04,640
have more secure access to your PC to your area by by locating some password to your devices using integrated
26
00:02:04,640 --> 00:02:05,930
security.
27
00:02:05,930 --> 00:02:10,230
This is another one of the main feature expanded technology.
28
00:02:10,230 --> 00:02:17,340
This is quite similar to that point hardware and modern I.T. you can have so many input and output I
29
00:02:17,670 --> 00:02:18,940
connected to your PC.
30
00:02:18,980 --> 00:02:24,700
You can configure it that you can link that in the same software so it has an expanded technology.
31
00:02:24,740 --> 00:02:32,300
You can also expand to manipulate amaizing the same Pizzi using the spiking and the last is diagnostic.
32
00:02:32,300 --> 00:02:37,980
You can see various alarms various errors in your software it says and you can clear a gross error.
33
00:02:38,000 --> 00:02:41,070
You can reset those errors you can diagnose those errors.
34
00:02:41,150 --> 00:02:44,690
You can monitor your inputs and outputs in the same software.
35
00:02:44,900 --> 00:02:47,130
OK you can do simulations as well.
36
00:02:47,390 --> 00:02:48,640
So this software.
37
00:02:49,490 --> 00:02:55,640
It's a total Indigo automation which can be programmed to use the program both aging and beauty using
38
00:02:55,640 --> 00:02:56,830
all these features.
39
00:02:57,030 --> 00:02:57,320
OK.
40
00:02:57,350 --> 00:02:58,870
So this is one off though.
41
00:02:59,060 --> 00:03:03,480
Personally I like the software compared to other software that I have you so far.
42
00:03:04,070 --> 00:03:05,760
So next is the features.
43
00:03:05,780 --> 00:03:11,900
Now we have three main features hostess control the logic it means you can make your little logic in
44
00:03:11,900 --> 00:03:19,370
your PC using the TIAA configuration my reservation means there is an addition you can create some animation
45
00:03:19,370 --> 00:03:24,590
you can create the buttons on your H am I using the same software set up network communication.
46
00:03:24,590 --> 00:03:30,260
You can do there never come together to see what of do and it will come negation of BNZ in todays lesson
47
00:03:30,350 --> 00:03:33,650
how you can set up the next communication using DNA.
48
00:03:33,720 --> 00:03:40,730
All right now we have to basically out of the software us as a point of view and second as a project
49
00:03:40,740 --> 00:03:46,090
to our end point of view you define your hardware you define your project name.
50
00:03:46,340 --> 00:03:49,870
You can you know you can open or close the project.
51
00:03:49,910 --> 00:03:52,310
You can define your install software.
52
00:03:52,640 --> 00:03:59,780
And you can also configure your PC to be as you want to use which HNY you want to use going on to configure
53
00:03:59,780 --> 00:04:00,670
that in the portal view.
54
00:04:00,680 --> 00:04:05,840
This is how it looks like and in the prosaic view this is the main work area where you have to do the
55
00:04:05,840 --> 00:04:08,480
programming you have to do the linking of the addresses.
56
00:04:08,480 --> 00:04:09,800
This is a project to you.
57
00:04:10,220 --> 00:04:14,090
So this is the main two views you have in your TIAA.
58
00:04:14,510 --> 00:04:20,570
So the best feature of the software is you can have quick easy drive and drag and drop feature which
59
00:04:20,570 --> 00:04:23,660
is very quick and very easy to change the inputs and outputs.
60
00:04:23,680 --> 00:04:26,510
I will show you that in today's lesson exercise.
61
00:04:26,930 --> 00:04:27,680
All right.
62
00:04:27,920 --> 00:04:31,460
So it is the life exercise demonstration.
63
00:04:31,560 --> 00:04:37,010
So in the life demonstration I'm going to show you how to make a little logic off the schematic diagram.
64
00:04:37,190 --> 00:04:37,990
OK.
65
00:04:38,000 --> 00:04:43,310
So we make this little logic using various steps like creating a project inserting that instruction
66
00:04:43,310 --> 00:04:45,740
configure the CPA with downloading and testing.
67
00:04:45,770 --> 00:04:47,460
So we'll see a live demonstration of that.
68
00:04:47,480 --> 00:04:51,620
And in that live demonstration you will understand various features which I've explained in the previous
69
00:04:51,620 --> 00:04:52,830
night.
70
00:04:52,880 --> 00:04:56,700
All right when you open the TIAA software you will have this window.
71
00:04:56,780 --> 00:04:59,930
Now in this window you will start with creating a new project.
72
00:05:00,020 --> 00:05:04,930
OK so I click on Create your project and I have to give a project name so let's give.
73
00:05:04,960 --> 00:05:08,810
And if I see my project name you can give any name you want.
74
00:05:08,810 --> 00:05:14,730
This is the part where your project is stored the altar and the command so click on Create So it with
75
00:05:14,760 --> 00:05:21,980
a couple of seconds to create your project then you have to make sure that your PC is powered up and
76
00:05:21,980 --> 00:05:27,560
this is connected to the land interface because we need to make sure these aren't all that we can configure
77
00:05:27,560 --> 00:05:30,210
the IP addresses in the later stages.
78
00:05:30,770 --> 00:05:33,410
So project has been successfully created.
79
00:05:33,410 --> 00:05:39,230
Now we have to configure the device so to configure the device just click on that and then you have
80
00:05:39,230 --> 00:05:45,650
to mention your controller but you are using in your project office show it.
81
00:05:45,750 --> 00:05:47,580
You mentioned sure all devices.
82
00:05:47,600 --> 00:05:51,200
So right now in this project we have not linked any device.
83
00:05:51,200 --> 00:05:58,640
So we have to click add new device so you can do your PC controller from Samdech 712 in gase if you
84
00:05:58,640 --> 00:06:04,220
have it in mind you can click on any of my and it can linger in my right so in control then select your
85
00:06:04,220 --> 00:06:06,340
Bucy in from this menu.
86
00:06:06,740 --> 00:06:13,250
So the PC which we are using you can find them one of them or the PC here see beautiful tool see AC-DC
87
00:06:13,370 --> 00:06:13,970
relay.
88
00:06:14,120 --> 00:06:22,550
OK so this model number you can select here so Treacher's see AC-DC relay.
89
00:06:22,550 --> 00:06:23,330
This is a model.
90
00:06:23,390 --> 00:06:26,880
You can open that and you will find the trees see the numbers.
91
00:06:26,960 --> 00:06:29,770
So the serial number which we have is this one.
92
00:06:29,920 --> 00:06:32,610
This is generally mentioned on this side of the.
93
00:06:33,350 --> 00:06:36,240
Here you will find cedar lumber.
94
00:06:36,830 --> 00:06:37,440
OK.
95
00:06:37,610 --> 00:06:41,980
You can read the serial number and you can match that in your software.
96
00:06:42,340 --> 00:06:43,230
OK.
97
00:06:43,610 --> 00:06:52,910
So I will click on Add not with a couple of seconds to disconfirmation to your Seamans TIAA in case
98
00:06:52,910 --> 00:06:54,970
you also have an H in my in your project.
99
00:06:55,040 --> 00:07:01,250
After adding that you see you can Deayton my husband so he can both you can I put the devices in the
100
00:07:01,250 --> 00:07:02,640
same software.
101
00:07:02,770 --> 00:07:03,370
OK.
102
00:07:03,500 --> 00:07:08,770
So once you add your hardware you can directly go to European C programming.
103
00:07:09,200 --> 00:07:15,170
So our objective is to make the later logic for this sample circuit.
104
00:07:15,170 --> 00:07:16,910
This is a Shimada example lot.
105
00:07:16,910 --> 00:07:20,610
So we have to make this later logic never Siemens TIAA.
106
00:07:20,630 --> 00:07:24,830
So this we have already discussed you know enhanced sleights OK.
107
00:07:25,160 --> 00:07:29,160
So once it loads it will go back to your project for you.
108
00:07:29,240 --> 00:07:31,640
So this was a part of you know this is the project you.
11293
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.