All language subtitles for 28_EN.

to run number 28 and cut the end. This start in you part design file. Okay and in

this tutorial we're going to use the multi-pad feature here. So let's create some

closed profile sketch. Let's choose a rectangle. And let's make some

translation. Let's make three instances. And

now if you click on pad only so you're going to extrude all these

rectangles with the same dimensions and thicknesses. Control C but now we want

to make different types for different rectangle. So we can use multi-pad. So now as

you notice here, cut the market the four profiles. For example, let's click on

the first profile and make an extrusion for 10 millimeter. And then go to the

second one. You can make it 20 millimeter. Third one, 30 millimeter and fourth one

40 millimeter. Click on preview. You can notice here we have different extruded

thicknesses and what you can do also we can extrude on the other side. Let's choose one of the

profiles. Click more so you have the second limit. You can make it, for example, 10 millimeter.

You can click on reverse direction so we can go to the second one. You can make it 20 millimeter.

And for third one, we can make it 30 millimeter, fourth one, 40 millimeter. Can click on preview.

So we have extruded on the second direction. So we can click OK. So now we have an idea

how to use the view. Have a look here. Make multiple windows. You can notice the difference in the direction and extrusion between these four rectangles.