All language subtitles for 26_EN.

This is the tutorial number 26 and it is the first tutorial in solid moodering or 3D moodering.

So let's start the new part file.

We go to Mckain, we can design, part design.

Okay, so you have, be sure that you have these workbench tools including the pad.

So pad or extrusion is to extrude the two sketches, make them 3D models or solid bodies.

So let's start with making profile.

Let's choose ellipse.

And to extrude a profile you need to have a closed profile.

So now let's exit and select pad.

And here the pad definition menu is pops up and here you can choose the thickness of the

extrusion.

For example, we can apply 50 so we have extruded these ellipse.

50 mm.

To read the pad or the feature, we can simply double click on the feature, pad 1.

We are now able to read it.

This for example at 60.

Preview, if we press preview, so it will show you an preview for the extrusion here.

If we are fine with it, then we click.

Okay.

So now let's make another extrusion.

Also, we can make a sketch on the surface.

We didn't talk about that before.

Now we have a solid body.

You can create a sketch on a surface or a flat.

So let's rotate or create a sketch.

Choose this flat surface and click sketch.

So now we are able to sketch on that surface.

So let's choose polygon this time and create polygon on the top of that ellipse.

Exit.

Now you can extrude that polygon press pad.

So you have a preview for this.

Now you have different types for extrusion, up to next up to last.

But in this case, we don't have enough solids to use these types.

So if it's up to next, in case you have a solid body next to this, and then it's going

to extrude up to F.

And if there is a plan or a surface, so we're going to cover these types in the practical

section and examples, which are going to upload it.

So let's choose dimension.

And here you have your selection.

Now you can, for example, if you select this one and exit from that selection.

So exit.

So it is unable to extrude that.

So now if you choose tick, now you have a surface to extrude.

Now you have to make a length.

For me, now this is the second direction.

And the thickness can make two millimeters thickness of the outside wall is two millimeter.

So let's click OK.

So we have a thickness.

We extrude it only a sigma of the profile.

So this is an idea what pad is about.

And we're going to use it a lot in the practical examples.

So it will be a very good training on solid works.

So now I'm done with this tutorial.

In this tutorial, we're going to talk about the drafted fillet pad.

So see you in the next tutorial.