Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:04,500
Tutorial number 14 in Catia.
2
00:00:04,500 --> 00:00:13,500
This start a new part from start we can get part design to give you the part directly
3
00:00:13,500 --> 00:00:22,640
and let's start a sketch and we're going to continue talking about the operation menu
4
00:00:22,640 --> 00:00:33,480
chamfer this time. So let's start with rectangle and also you can reach with the chamfer tool
5
00:00:33,480 --> 00:00:46,880
here in the right side and the same like the corner times as we used last tutorial.
6
00:00:46,880 --> 00:00:53,560
Let's choose the simplest one. You need to make a chamfer and also you can specify the
7
00:00:53,560 --> 00:01:03,920
emission tool that chamfer for example 20. And let's again activate the chamfer. Choose
8
00:01:03,920 --> 00:01:13,640
this one and going to keep a line as you notice. In the sketch tool you can also write the
9
00:01:13,640 --> 00:01:28,440
dimension to create a mini. So let's keep this line and trimming. And there is again the
10
00:01:28,440 --> 00:01:38,840
same idea like the corner or the fillet as we discussed in the previous tutorial. So
11
00:01:38,840 --> 00:01:45,840
you can see the previous tutorial so you have an idea about all these types of chamfer.
1327
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.