Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:07,000
This is tutorial number 134 and it covers inserting GDNT within KT-AV5.
2
00:00:07,000 --> 00:00:13,000
To start off, open up tutorial part number 127 which is located on the DVD.
3
00:00:13,000 --> 00:00:18,000
Now what I'm going to do is I'm going to show you how to insert GDNT into your drawings.
4
00:00:18,000 --> 00:00:23,000
So you can find it on the toolbar over here and you can find your GDNT.
5
00:00:23,000 --> 00:00:30,000
Or if you click insert, dimensioning, tolerance, you can click GDNT.
6
00:00:30,000 --> 00:00:40,000
Now once you have it clicked, all you have to do is click on your drawing, drag it out, and then fill out your GDNT.
7
00:00:40,000 --> 00:00:49,000
So say for this line profile here, let's just turn it into a surface profile for this area here.
8
00:00:49,000 --> 00:00:59,000
Let's make the tolerance one and then we'll refer to the A, B, and C datums.
9
00:00:59,000 --> 00:01:03,000
Click OK and we've created A GDNT.
10
00:01:03,000 --> 00:01:10,000
Now you're able to go in and dimension it and create whatever GDNT may be that you need for your parts.
11
00:01:10,000 --> 00:01:20,000
And that concludes our tutorial on how to insert GDNT within KT-AV5.
1297
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.