Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:07,000
This is tutorial number 123 and it covers how to insert drawing views within KT of V5.
2
00:00:07,000 --> 00:00:12,000
To start off, open up the Fishing Real Step File which is included on the DVD.
3
00:00:12,000 --> 00:00:18,000
Now what we're going to do in this tutorial is we're going to take this part and we're going to insert it into the drawing.
4
00:00:18,000 --> 00:00:25,000
So from it we're going to be able to create our front view, top view, side view, and our isometric view.
5
00:00:25,000 --> 00:00:31,000
You get your three views plus your pictorial isometric view that you would need to create your drawings.
6
00:00:31,000 --> 00:00:35,000
So to do this, to start off let's open up a new drawing file.
7
00:00:35,000 --> 00:00:40,000
Let's click File, click New, click Drawing, click OK.
8
00:00:40,000 --> 00:00:43,000
Now we're going to have to choose the Sheet Size.
9
00:00:43,000 --> 00:00:49,000
Let's choose A2, click OK, and now we have our sheet.
10
00:00:49,000 --> 00:00:54,000
To insert new views you have to click the Views.
11
00:00:54,000 --> 00:00:58,000
This is a whole tool bar and you're able to choose from any of these.
12
00:00:58,000 --> 00:01:03,000
You can also go to Insert Views Projection and you're able to choose.
13
00:01:03,000 --> 00:01:12,000
To get the view of the Fishing Real, you have to open this up and click Front View.
14
00:01:12,000 --> 00:01:17,000
Now once it's highlighted, click Window, click the Fishing Real.
15
00:01:17,000 --> 00:01:20,000
And now we're able to select the part that we want.
16
00:01:20,000 --> 00:01:25,000
So you already have to have the component that you want to create the view of open.
17
00:01:25,000 --> 00:01:31,000
And from it you're able to select a plane and you can see that we're getting different views.
18
00:01:31,000 --> 00:01:40,000
Now when you select it you can see the preview in the bottom right hand corner and just going to show you what you're going to get.
19
00:01:40,000 --> 00:01:45,000
So it's a good idea to either take it from a plane or from a flat surface.
20
00:01:45,000 --> 00:01:48,000
So once you have it, click OK.
21
00:01:48,000 --> 00:01:51,000
And it's automatically going to bring it into the drawing.
22
00:01:51,000 --> 00:01:54,000
Now right now it's not positioned how I would like it.
23
00:01:54,000 --> 00:01:58,000
So you're able to rotate it until you get the position you like.
24
00:01:58,000 --> 00:02:05,000
You're also able to click that green dot and drag it all the way around until you get the position you want.
25
00:02:05,000 --> 00:02:12,000
You can also flip it around and it just lets you manipulate it to get the orientation that you're looking for.
26
00:02:12,000 --> 00:02:17,000
Once you like it, just click on the sheet and you're going to have your drawing view.
27
00:02:17,000 --> 00:02:21,000
Now you're able to drag it so let's drag it to the bottom left corner here.
28
00:02:21,000 --> 00:02:24,000
And let's make our top and right hand view.
29
00:02:24,000 --> 00:02:28,000
Now with the front view we're able to create that front view.
30
00:02:28,000 --> 00:02:31,000
And from it we're going to derive our other two views from it.
31
00:02:31,000 --> 00:02:35,000
So let's open up the views and then go to projection view.
32
00:02:35,000 --> 00:02:39,000
Using the projection view we're able to create the top and the right.
33
00:02:39,000 --> 00:02:43,000
And you can see in the display how it looks.
34
00:02:43,000 --> 00:02:46,000
It's showing you that you're able to derive it from one and create another.
35
00:02:46,000 --> 00:02:48,000
So click projection view.
36
00:02:48,000 --> 00:02:51,000
And if you put it up top you're going to get the top view.
37
00:02:51,000 --> 00:02:53,000
If you put it to the right you're going to get the right view.
38
00:02:53,000 --> 00:02:54,000
So let's do both.
39
00:02:54,000 --> 00:02:56,000
Put it to the right.
40
00:02:56,000 --> 00:02:59,000
And then let's put one to the top.
41
00:02:59,000 --> 00:03:04,000
So now we have our front view and our top and side view.
42
00:03:04,000 --> 00:03:06,000
Now all we need is our isometric view.
43
00:03:06,000 --> 00:03:10,000
To do this, click the isometric view.
44
00:03:10,000 --> 00:03:12,000
And then go back to the part.
45
00:03:12,000 --> 00:03:15,000
So we'll go back to the fishing reel step file.
46
00:03:15,000 --> 00:03:20,000
And what you do is just position it exactly how you want to see it on the drawing.
47
00:03:20,000 --> 00:03:26,000
So if you want to see it like this position just like that, click on it and you're going to get that view.
48
00:03:26,000 --> 00:03:30,000
So just click anywhere and you're going to get that exact view.
49
00:03:30,000 --> 00:03:33,000
Drag it into the space you wanted in.
50
00:03:33,000 --> 00:03:38,000
Click on the background and it's created your view.
51
00:03:38,000 --> 00:03:47,000
So from the part file that we had before, we're able to create our front, top and side view, along with our isometric view.
52
00:03:47,000 --> 00:03:51,000
So whenever you're creating a view you need to have the part or assembly open.
53
00:03:51,000 --> 00:03:53,000
And you're going to have to toggle back with the windows.
54
00:03:53,000 --> 00:04:00,000
So like I showed when you click the front view, you're going to have to go through the window and select which one you want to make it of.
55
00:04:00,000 --> 00:04:09,000
And then from there we use the projection view to make the top and the right hand view and the isometric to create the isometric view.
56
00:04:09,000 --> 00:04:17,000
So this is how you're going to be inserting and creating your drawing views from the part files and assembly files that we've created before.
57
00:04:17,000 --> 00:04:31,000
And that concludes our tutorial on inserting drawing views within KT of V5.
6251
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.