Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:09,000
Tutorial number 9 about the circuit profiles in the sketch chart.
2
00:00:09,000 --> 00:00:18,000
Remember we took it in the previous one about the rectangle profiles and we used them.
3
00:00:18,000 --> 00:00:24,000
And just tell you we are going to talk about the circuit profile as you see it here in this menu.
4
00:00:24,000 --> 00:00:28,000
You have all these types of circuits.
5
00:00:28,000 --> 00:00:34,000
Circular 3 points, tangent circuit, 3 points arc, so on.
6
00:00:34,000 --> 00:00:42,000
Also you can make this menu by insert, constrain, profile circuit.
7
00:00:42,000 --> 00:00:46,000
And here you have all these types of circuits.
8
00:00:46,000 --> 00:00:53,000
So now let's first, we already know this, the first type of circuits, very simple circuit.
9
00:00:53,000 --> 00:01:10,000
We can just choose point and make our circuit or make it anywhere.
10
00:01:10,000 --> 00:01:16,000
And the second type is 3 points circle where you can choose 3 points to create your circuit.
11
00:01:16,000 --> 00:01:23,000
For example, you can choose this point, this point, this point.
12
00:01:23,000 --> 00:01:28,000
So you have a circle passing all these 3 points.
13
00:01:28,000 --> 00:01:31,000
And now you have the tangent circuit.
14
00:01:31,000 --> 00:01:34,000
Let's choose 3 lines to make a tangent circuit.
15
00:01:34,000 --> 00:01:37,000
You have this line, this line and this line.
16
00:01:37,000 --> 00:01:41,000
So you have a circle tangent with these 3 lines.
17
00:01:41,000 --> 00:01:47,000
And we also not blinds the inner rectangle.
18
00:01:47,000 --> 00:01:52,000
And let's try these 3 points arc.
19
00:01:52,000 --> 00:01:54,000
Let's choose first one.
20
00:01:54,000 --> 00:01:59,000
And here you can pick 3 points, first point, second point.
21
00:01:59,000 --> 00:02:03,000
And here you can draw your arc.
22
00:02:03,000 --> 00:02:17,000
It's quite needing some concentration, but the second one, 3 points arcs, starting with limits.
23
00:02:17,000 --> 00:02:19,000
It's quite easy to use.
24
00:02:19,000 --> 00:02:24,000
So let's choose 3 points, this point, this point.
25
00:02:24,000 --> 00:02:31,000
Now you can easily draw your 3 point arc.
26
00:02:31,000 --> 00:02:35,000
So this is the circuit profile.
27
00:02:35,000 --> 00:03:04,000
Hope this tutorial was useful and thanks for watching.
2540
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.