Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:06,000
This is tutorial number 49 and it covers how to use the slot feature within KTAV5.
2
00:00:06,000 --> 00:00:11,000
To start off, open up tutorial part number 49 which is located on the DVD.
3
00:00:11,000 --> 00:00:21,000
Now these slot features can be found on the side here, on the toolbar, or if you go and click insert, sketch based features and slot.
4
00:00:21,000 --> 00:00:34,000
Now the slot is exactly the same as the rib, which we did in the previous tutorial. And it's the same in the sense that you need a profile and you need a path for the profile to be swept along.
5
00:00:34,000 --> 00:00:46,000
So what it is is that the rib extrudes and creates a part and the slot will make like a pocket and take away and extract from the part.
6
00:00:46,000 --> 00:00:51,000
So to start off, let's start making some sketches to make our slot.
7
00:00:51,000 --> 00:00:58,000
So first off, we're going to make the profile. So let's click this face here, click sketch.
8
00:00:58,000 --> 00:01:13,000
And let's click the top line here, press control, click this line here, and this line here. Select them all, project them out, and turn them all into construction elements.
9
00:01:13,000 --> 00:01:20,000
Now we'll click the rectangle and let's draw a rectangle in here.
10
00:01:20,000 --> 00:01:29,000
Now I'm just going to go back because I had it selected as the construction, so remember to turn it off.
11
00:01:29,000 --> 00:01:39,000
Now we'll do another rectangle and let's dimension it. So let's dimension this to 30.
12
00:01:39,000 --> 00:01:45,000
And let's make it from this side here to that side there.
13
00:01:45,000 --> 00:01:50,000
Let's dimension it to 30 also.
14
00:01:50,000 --> 00:01:58,000
Now let's exit and go back up. So now what we have is our profile for our slot.
15
00:01:58,000 --> 00:02:01,000
So now what we're going to do is we're going to create the path for it to follow.
16
00:02:01,000 --> 00:02:08,000
So let's click this face here, click sketch, and we'll click this line here, and this line here.
17
00:02:08,000 --> 00:02:15,000
Extract them out, turn them into construction elements, and we'll draw a profile.
18
00:02:15,000 --> 00:02:23,000
So we'll draw a line. Let's just draw one straight line going across at an angle.
19
00:02:23,000 --> 00:02:28,000
And let's make this angle. So let's click the constraint.
20
00:02:28,000 --> 00:02:31,000
So we'll click this line and this line here.
21
00:02:31,000 --> 00:02:38,000
And we'll turn this into a 80 degree angle. Now we'll go back up.
22
00:02:38,000 --> 00:02:42,000
And we'll let it make this lot going across.
23
00:02:42,000 --> 00:02:48,000
So let's click slot. We'll click the profile, which is this sketch here.
24
00:02:48,000 --> 00:02:52,000
And then the center curve, which is our path right here.
25
00:02:52,000 --> 00:02:56,000
And you can see in the preview what it's going to look like.
26
00:02:56,000 --> 00:03:05,000
Let's click OK. And you can see that we cut a slot right out of the block.
27
00:03:05,000 --> 00:03:09,000
Now again, like the rib feature, we can go back in and there's some things we can play around with.
28
00:03:09,000 --> 00:03:15,000
So let's double click on it. And you're able to merge the ends again.
29
00:03:15,000 --> 00:03:20,000
So we'll clean it up and just merge all the ends. And you're able to create a thick profile.
30
00:03:20,000 --> 00:03:24,000
So let's make another thick profile. Let's click thick profile.
31
00:03:24,000 --> 00:03:30,000
And this time let's make the thickness 10. Click OK.
32
00:03:30,000 --> 00:03:36,000
And now you can see that we cut out around 10 millimeters all the way around.
33
00:03:36,000 --> 00:03:44,000
Now we're also able to go in and change that angle so we can kind of move this slot up and down.
34
00:03:44,000 --> 00:03:48,000
So let's open up the slot. Double click on Sketch 4.
35
00:03:48,000 --> 00:03:55,000
And let's change this angle. So let's double click on it. And let's make the angle 60 degrees.
36
00:03:55,000 --> 00:04:03,000
Click OK. And we'll go back. And you'll see that we've changed it. And it's moved up.
37
00:04:03,000 --> 00:04:08,000
Now let's move it back down. Double click on Sketch 4 again.
38
00:04:08,000 --> 00:04:13,000
Right click on it. Or sorry, double click on it. And we'll change the sector.
39
00:04:13,000 --> 00:04:21,000
Let's put it to sector 3. And let's bring this angle. Let's try it at 200 right now.
40
00:04:21,000 --> 00:04:27,000
And that's not going to work. So let's bring it up a little bit more. Let's put it to 250.
41
00:04:27,000 --> 00:04:32,000
And bring it up just a little bit more again. So we'll bring it up to 270.
42
00:04:32,000 --> 00:04:37,000
Let's put it down a little bit more. 260. And we'll go back.
43
00:04:37,000 --> 00:04:43,000
And again, we've cut it on another angle. So we're able to change the path as much as you want.
44
00:04:43,000 --> 00:04:48,000
Now let's go into this path one more time. Let's delete this line here.
45
00:04:48,000 --> 00:04:52,000
And let's put more of a curve, more organic cut to it.
46
00:04:52,000 --> 00:04:58,000
So with the spline tool, just go and make a nice curve all the way around.
47
00:04:58,000 --> 00:05:05,000
And we'll go back. And automatically go along that curve that we made for it.
48
00:05:05,000 --> 00:05:12,000
Now let's delete this slot. And this time let's create one that isn't a square.
49
00:05:12,000 --> 00:05:17,000
So let's do a circle like we did on the last one. So let's click this face.
50
00:05:17,000 --> 00:05:23,000
Click sketch. And we'll click circle. Just draw a little circle in there.
51
00:05:23,000 --> 00:05:29,000
And we'll go back. Click the top face here. Click sketch.
52
00:05:29,000 --> 00:05:36,000
And as we're going to be able to cut through this, we can kind of make like a root for it to follow.
53
00:05:36,000 --> 00:05:42,000
So if we use the spline tool, you can kind of like make like a little path and a little root.
54
00:05:42,000 --> 00:05:45,000
And everything's going to follow and cut right through it.
55
00:05:45,000 --> 00:05:50,000
So when you're doing this, this can be kind of like tubing or piping that you want something to follow through.
56
00:05:50,000 --> 00:05:57,000
So now let's go back. And we'll use the slot feature.
57
00:05:57,000 --> 00:06:02,000
So the profile is going to be this sketch here. And then center curve is going to be that profile up there.
58
00:06:02,000 --> 00:06:08,000
Click OK. And we've cut the slot through it.
59
00:06:08,000 --> 00:06:12,000
Now if we double click on this, we're going to change this again.
60
00:06:12,000 --> 00:06:17,000
And we'll just make it go straight through.
61
00:06:17,000 --> 00:06:21,000
Go back up. And now we've cut the slot straight through.
62
00:06:21,000 --> 00:06:30,000
So by using this slot feature in a kind of application like this with the hole, you're able to kind of have your dimension of what the hole is going to be.
63
00:06:30,000 --> 00:06:35,000
And then kind of draw out and say where it's going to go through, say like a larger block.
64
00:06:35,000 --> 00:06:38,000
So kind of like a little pathway and everything for it.
65
00:06:38,000 --> 00:06:48,000
So again, this is a tool that's going to save you time as you're able to create like a complex path for it to follow along and just use and create one sketch as a profile for it.
66
00:06:48,000 --> 00:06:53,000
And this concludes our tutorial on how to use the slot feature within KT-A-V5.
7974
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.