Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:06,000
This is tutorial number 37 and it covers how to use the sketch analysis feature within
2
00:00:06,000 --> 00:00:11,800
KT-AV5. To start off, open up a new KT-AV5 part and once you've done that, let's go into
3
00:00:11,800 --> 00:00:17,480
the sketcher, so click Sketch and click any of the planes. Now what we're going to do in
4
00:00:17,480 --> 00:00:21,680
this tutorial is we're going to be using the Sketch Analysis tool and you can find it
5
00:00:21,680 --> 00:00:27,320
if you go to Tools and click Sketch Analysis. Now what this is going to do is it's going
6
00:00:27,320 --> 00:00:31,440
to take a look at the sketch that you've created and tell you if there's anything wrong,
7
00:00:31,440 --> 00:00:38,120
if there's overlapping edges, if there's a space in between a couple points and whatnot.
8
00:00:38,120 --> 00:00:43,120
So this is going to be able to tell you if your sketch is good to go or if you're going
9
00:00:43,120 --> 00:00:47,480
to have to go back and make some changes. Now the reasoning behind why you would want
10
00:00:47,480 --> 00:00:53,080
to know if your sketch is good and what's going on with it is that when you're using it
11
00:00:53,080 --> 00:00:57,800
to create a feature, if you want to extrude, you need to have a closed sketch. So if you
12
00:00:57,800 --> 00:01:04,039
have a sketch that's open, then there's something wrong. So start off, let's make a profile,
13
00:01:04,039 --> 00:01:13,280
so let's click Profile and let's make a profile and we'll close it up. Now click Tools,
14
00:01:13,280 --> 00:01:18,280
click Sketch Analysis and it's going to tell you the number of curves and the status.
15
00:01:18,280 --> 00:01:23,480
So right now it's closed, so that means it's good and it's going to tell you up here everything
16
00:01:23,480 --> 00:01:29,640
passed. Now let's delete this one line here and let's do the Sketch Analysis again.
17
00:01:29,640 --> 00:01:36,040
So let's click Tools, Sketch Analysis and it's going to say that it's open. So it's not
18
00:01:36,040 --> 00:01:39,280
that there's anything wrong with this sketch, it's just telling you that this is an open
19
00:01:39,280 --> 00:01:43,720
sketch and with an open sketch you're not going to be able to extrude or cut. You'd have
20
00:01:43,720 --> 00:01:52,440
to use this kind of like as a guide or a path. Now if you throw say a point onto one of
21
00:01:52,440 --> 00:01:58,680
these lines and let's do Sketch Analysis, let's click Tools, Sketch Analysis, it's going
22
00:01:58,680 --> 00:02:03,960
to tell you that there's an implicit profile and that's the profile that we have and it's
23
00:02:03,960 --> 00:02:08,039
going to tell you that there's a point that's isolated. Now you're not going to want that
24
00:02:08,039 --> 00:02:15,920
point when you're using a feature. So to get rid of it all you have to do is click Delete
25
00:02:15,920 --> 00:02:24,600
Geometry, click Delete and it's gone and we'll click Closed and what we're going to do now
26
00:02:24,600 --> 00:02:33,760
is we're going to create a very small gap in between a few points. So from that one point
27
00:02:33,760 --> 00:02:42,120
zoom in as far as you can and just try to put it offset just a little bit and then zoom
28
00:02:42,120 --> 00:02:52,079
back out. Now run the Sketch Analysis again. So click Tools, Sketch Analysis and it's
29
00:02:52,079 --> 00:02:56,959
going to tell you again that it's opened and this time because it's a very small point
30
00:02:56,959 --> 00:03:01,760
it's going to highlight it in blue. So you know the area that it's in and you're able
31
00:03:01,760 --> 00:03:07,959
to zoom in to see what's going on. So the Sketch Analysis, it's a great tool because
32
00:03:07,959 --> 00:03:12,679
it allows you to, before you go out and try a feature and you're going to get with the
33
00:03:12,679 --> 00:03:17,519
feature saying that you can't use the Sketch, you're able to check your Sketch, make sure
34
00:03:17,519 --> 00:03:23,000
it's good and then make sure that it's meeting the criteria that you want it to be. Now
35
00:03:23,000 --> 00:03:28,799
I'm going to show you one more and we're going to show you that you can have two profiles
36
00:03:28,800 --> 00:03:38,200
within the one sketch. So let's delete this sketch here and let's just draw two circles.
37
00:03:38,200 --> 00:03:41,840
And we'll click Tools, Sketch Analysis and again it's going to show that we have two
38
00:03:41,840 --> 00:03:46,320
and they're both closed. So it doesn't have to be just to one specific profile. It's
39
00:03:46,320 --> 00:03:51,240
going to show multiple. So everything that's going on in this one sketch it's going to show.
40
00:03:51,240 --> 00:03:57,200
So this tool allows you to check and recheck everything before you put it out into other
41
00:03:57,200 --> 00:04:01,959
workbenches to create parts and whatnot. And that concludes our tutorial on how to use
42
00:04:01,960 --> 00:04:28,720
the Sketch Analysis feature within KT of V5.
5299
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.