Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:07,000
This is tutorial number 21 and it covers how to use the Translate Sketch feature within KITIA V5.
2
00:00:07,000 --> 00:00:12,000
To start off, open up a new KITIA V5 part and once you've done that, let's go into the Sketch Workbench.
3
00:00:12,000 --> 00:00:17,000
So click Sketch and click any of the planes.
4
00:00:17,000 --> 00:00:22,000
So in this tutorial we're going to be using the Translate feature and it's this button right here.
5
00:00:22,000 --> 00:00:30,000
This is the Translate and you can also find it if you go to Insert, Operation, Transformation, Translate.
6
00:00:30,000 --> 00:00:38,000
So what this is going to do is from an original sketch, we're able to move it around and we can even duplicate it and kind of make a pattern of it.
7
00:00:38,000 --> 00:00:49,000
Now this is a really good tool if you have an intricate profile or sketch that you have that again would take too much time to move to another position.
8
00:00:49,000 --> 00:00:53,000
You can just pick it, move it and drop it somewhere else.
9
00:00:53,000 --> 00:00:56,000
Now what I'm going to do is I'm going to show you a couple examples of how to do this.
10
00:00:56,000 --> 00:01:03,000
So let's draw a circle right at the center point and what we're going to do is we're going to translate and make a copy of it.
11
00:01:03,000 --> 00:01:07,000
So let's click on it and click Translate.
12
00:01:07,000 --> 00:01:09,000
And right now it's in Duplicate mode.
13
00:01:09,000 --> 00:01:15,000
You can toggle it on and off and right now we're going to make one copy of it.
14
00:01:15,000 --> 00:01:23,000
So we'll click the center point and you can see that we can drag it and move it anywhere we want and we can just snap it and leave it.
15
00:01:23,000 --> 00:01:30,000
What I'm going to do is I'm going to snap it to this edge here and now I've duplicated that circle.
16
00:01:30,000 --> 00:01:34,000
Now I'm going to press Ctrl Z and we're going to do it again.
17
00:01:34,000 --> 00:01:39,000
So let's click Translate and this time let's make 10 translations.
18
00:01:39,000 --> 00:01:54,000
Click the center point and you can see that by Zoom out you can see that I have 10 translations and what I'm going to do is I'm just going to snap it to the edge like the last time.
19
00:01:54,000 --> 00:01:59,000
Now let's press Ctrl Z again.
20
00:01:59,000 --> 00:02:06,000
Now this time what I'm going to do is I'm going to make a profile and I'm just going to draw one over here.
21
00:02:06,000 --> 00:02:10,000
Again this would be a profile that you wouldn't want to redo.
22
00:02:10,000 --> 00:02:13,000
So what you'd want to do is just translate it.
23
00:02:13,000 --> 00:02:18,000
So we're going to click Translate and we're going to uncheck Duplicate and we're just going to move it over.
24
00:02:18,000 --> 00:02:23,000
So click on this point or any point and then you're able just to translate and move it over.
25
00:02:23,000 --> 00:02:26,000
So let's move it up here. Sketch moves there.
26
00:02:26,000 --> 00:02:32,000
We can do it again. We'll translate it from this point here and we can pull it over here.
27
00:02:32,000 --> 00:02:36,000
Now let's put this point onto the center point. So we'll click Translate.
28
00:02:36,000 --> 00:02:41,000
Click this point and snap it to the center point.
29
00:02:41,000 --> 00:02:49,000
So you're able to have points all over that you can translate and snap your sketch and move it to that position.
30
00:02:49,000 --> 00:02:55,000
So again this is a very powerful tool as it lets you duplicate your sketches and allows you to translate them.
31
00:02:55,000 --> 00:03:02,000
These are time savers as it would take you too long to redo your sketch and dimension it and put in that position.
32
00:03:02,000 --> 00:03:07,000
With Translate you can just grab it, duplicate it or move it to that position.
33
00:03:07,000 --> 00:03:34,000
And that concludes our tutorial on how to use the Translate sketch feature within KT-AV5.
4226
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.