Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:06,000
This is tutorial number 15 and it covers how to use the profile sketch feature within
2
00:00:06,000 --> 00:00:09,000
Kittia V5.
3
00:00:09,000 --> 00:00:13,000
To start off, open up a new part file and once you've done that, we'll go into the
4
00:00:13,000 --> 00:00:14,000
sketcher.
5
00:00:14,000 --> 00:00:21,000
So we'll click sketch and we'll click on a work plane.
6
00:00:21,000 --> 00:00:26,000
So in this tutorial, we're going to be covering the profile sketch feature.
7
00:00:26,000 --> 00:00:32,000
Now I'm going to show you how it works. So you click on it and from a point you start and
8
00:00:32,000 --> 00:00:38,000
you're able to create a profile from it and you're able to keep going around and around until
9
00:00:38,000 --> 00:00:44,000
you reach the starting point or I'll show you another one.
10
00:00:44,000 --> 00:00:52,000
You can keep going and if you press the escape button, then it gets rid of the
11
00:00:52,000 --> 00:00:56,000
profile and leaves you with what you just had so you don't have to close it.
12
00:00:56,000 --> 00:01:02,000
Now the advantage of using the profile compared to using say like the line would be that you have to go
13
00:01:02,000 --> 00:01:07,000
and manually do each individual line.
14
00:01:07,000 --> 00:01:12,000
So with the profile, you're able to quickly add lines all the way around rather than going
15
00:01:12,000 --> 00:01:16,000
back and forth, adding one line at a time.
16
00:01:16,000 --> 00:01:23,000
Now the sketch profile, it also allows you to put in circles.
17
00:01:23,000 --> 00:01:31,000
So we've put these lines in, now hold and drag the profile out until you get a box like this
18
00:01:31,000 --> 00:01:37,000
and now you're able to get a arc so you have kind of like a three point circle.
19
00:01:37,000 --> 00:01:40,000
So you're able to bend it around and move it around.
20
00:01:40,000 --> 00:01:48,000
So let's bend this one here and we'll drag another one, put it around there, drag again,
21
00:01:48,000 --> 00:01:56,000
put it there, drag again, and then you're able to continue with the lines if you want to.
22
00:01:56,000 --> 00:02:05,000
Now the lines, you don't have to do anything special, it's always there, you just have to click and click.
23
00:02:05,000 --> 00:02:12,000
With the circles, after you've clicked and finished one, you have to drag out and make this box,
24
00:02:12,000 --> 00:02:18,000
then you're going to have the circle to play around and do what you want.
25
00:02:18,000 --> 00:02:24,000
So with the sketch profile, you're able to create a profile of the sketch you want quickly and easily,
26
00:02:24,000 --> 00:02:31,000
rather than going back and forth, piecing each line or curve one by one.
27
00:02:31,000 --> 00:02:38,000
So this concludes our tutorial on how to use the profile sketch feature within KTAV5.
3047
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.