Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00.05 --> 00:00:02.07
- [Instructor] So let's talk about library parts.
2
00:00:02.07 --> 00:00:04.02
So library parts
3
00:00:04.02 --> 00:00:08.08
that come with ArchiCAD are pretty comprehensive
4
00:00:08.08 --> 00:00:13.01
but they might not necessarily represent the exact object
5
00:00:13.01 --> 00:00:15.05
that you're trying to place.
6
00:00:15.05 --> 00:00:16.08
So for instance,
7
00:00:16.08 --> 00:00:19.04
if we have some furniture
8
00:00:19.04 --> 00:00:21.07
and we go through here
9
00:00:21.07 --> 00:00:24.04
and we have a couple bookshelves
10
00:00:24.04 --> 00:00:26.07
and drawers and things like that,
11
00:00:26.07 --> 00:00:30.09
they might not necessarily be exactly what you want.
12
00:00:30.09 --> 00:00:33.08
So, with that being said,
13
00:00:33.08 --> 00:00:40.01
ArchiCAD has developed a new method for creating objects
14
00:00:40.01 --> 00:00:44.09
and so if we go to the ArchiCAD website
15
00:00:44.09 --> 00:00:46.08
on the sidebar here
16
00:00:46.08 --> 00:00:50.09
we have this little expanding kind of menu bar
17
00:00:50.09 --> 00:00:55.00
and if we go to support
18
00:00:55.00 --> 00:01:01.03
and we go down here to Downloads,
19
00:01:01.03 --> 00:01:04.03
we will see some of the downloads
20
00:01:04.03 --> 00:01:08.05
that are available from Graphisoft's website.
21
00:01:08.05 --> 00:01:10.04
So if we go to Library
22
00:01:10.04 --> 00:01:15.08
and we clicked on this Library Part Maker
23
00:01:15.08 --> 00:01:20.07
and so this is the Library Part Maker's kind of webpage
24
00:01:20.07 --> 00:01:24.09
and you can download it for Mac or Windows
25
00:01:24.09 --> 00:01:26.03
and so I've already done that
26
00:01:26.03 --> 00:01:29.03
and I've gone through the installation process
27
00:01:29.03 --> 00:01:30.09
and so once you've done that,
28
00:01:30.09 --> 00:01:33.05
if you go to Design
29
00:01:33.05 --> 00:01:36.04
and then you go to Design Extras,
30
00:01:36.04 --> 00:01:40.08
there's this Library Part Maker option here.
31
00:01:40.08 --> 00:01:42.00
So once we open that up,
32
00:01:42.00 --> 00:01:45.02
it gives us this option here.
33
00:01:45.02 --> 00:01:46.02
So what we're going to do
34
00:01:46.02 --> 00:01:49.02
is we're going to quickly create a table
35
00:01:49.02 --> 00:01:51.09
and so what I'll do
36
00:01:51.09 --> 00:01:54.09
is I'm just going to grab a slab.
37
00:01:54.09 --> 00:01:58.04
I'm going to make this a little bit smaller either way
38
00:01:58.04 --> 00:02:01.01
and I'm going to make the thickness
39
00:02:01.01 --> 00:02:04.09
of the table top two inches
40
00:02:04.09 --> 00:02:07.03
and then I'm going to look at the material
41
00:02:07.03 --> 00:02:10.04
and I'm going to make it a wood.
42
00:02:10.04 --> 00:02:13.01
We'll just use OSB for now
43
00:02:13.01 --> 00:02:18.08
and I'm going to set the height of it to be,
44
00:02:18.08 --> 00:02:21.09
let's just make it 42 inches.
45
00:02:21.09 --> 00:02:23.08
I'm going to start by clicking
46
00:02:23.08 --> 00:02:30.06
and I'm just going to make it a four foot by eight foot table
47
00:02:30.06 --> 00:02:33.08
and I'm going to give it some legs
48
00:02:33.08 --> 00:02:35.08
and so I'll pick some legs.
49
00:02:35.08 --> 00:02:40.06
I'll just make them wood structural
50
00:02:40.06 --> 00:02:42.03
and let's see here.
51
00:02:42.03 --> 00:02:44.05
I'm going to take this off
52
00:02:44.05 --> 00:02:48.05
and I'm going to make them also 40 inches
53
00:02:48.05 --> 00:02:52.07
since the table top itself is 42 inches
54
00:02:52.07 --> 00:02:57.07
and I'll make them four by four thickness
55
00:02:57.07 --> 00:03:03.08
and let's just do something here
56
00:03:03.08 --> 00:03:05.05
and so when I click in here
57
00:03:05.05 --> 00:03:08.02
just going to drop this leg here.
58
00:03:08.02 --> 00:03:10.04
I'm going to move it to the corner
59
00:03:10.04 --> 00:03:14.07
and I'll probably just move it in three inches.
60
00:03:14.07 --> 00:03:18.02
So I'm just tabbing and clicking into there
61
00:03:18.02 --> 00:03:20.06
so I get three inches
62
00:03:20.06 --> 00:03:28.09
and let's just mirror these.
63
00:03:28.09 --> 00:03:34.02
So just using shortcut command to mirror
64
00:03:34.02 --> 00:03:37.07
and copy it
65
00:03:37.07 --> 00:03:39.05
and I'm going to do the same thing here.
66
00:03:39.05 --> 00:03:43.01
I'm going to mirror and copy it.
67
00:03:43.01 --> 00:03:46.05
So my shortcut command is Ctrl + M for that
68
00:03:46.05 --> 00:03:50.02
and then I'm just using the option command
69
00:03:50.02 --> 00:03:52.09
to make a copy of it.
70
00:03:52.09 --> 00:03:55.08
So let's look at that in 3D.
71
00:03:55.08 --> 00:04:00.02
So I'm just going to select it
72
00:04:00.02 --> 00:04:07.06
and I'm going to view in 3D
73
00:04:07.06 --> 00:04:16.03
and so there is my table looks okay
74
00:04:16.03 --> 00:04:17.08
and so what I'm going to do
75
00:04:17.08 --> 00:04:19.08
is I'm going to go back to the floor plan
76
00:04:19.08 --> 00:04:24.08
and now I have this Library Part Maker option here.
77
00:04:24.08 --> 00:04:26.00
So the first thing I'm going to do
78
00:04:26.00 --> 00:04:27.05
is I'm going to select the area
79
00:04:27.05 --> 00:04:30.03
that I want to include in my design.
80
00:04:30.03 --> 00:04:33.07
So let's just make a box around there
81
00:04:33.07 --> 00:04:36.02
and so now I have the design.
82
00:04:36.02 --> 00:04:38.03
I'm going to do one other thing
83
00:04:38.03 --> 00:04:45.03
is I'm going to explode this object.
84
00:04:45.03 --> 00:04:50.07
So if I go down to Edit and then Reshape
85
00:04:50.07 --> 00:04:55.03
and then if I go down to Explode
86
00:04:55.03 --> 00:04:59.05
and I'm going to keep the original elements there
87
00:04:59.05 --> 00:05:01.04
and I'll tell you why in a second.
88
00:05:01.04 --> 00:05:03.06
So let's just explode that.
89
00:05:03.06 --> 00:05:04.08
So that means that
90
00:05:04.08 --> 00:05:07.07
all the three dimensional objects are there
91
00:05:07.07 --> 00:05:11.03
but also I have a two dimensional line
92
00:05:11.03 --> 00:05:13.09
of what I was just looking at
93
00:05:13.09 --> 00:05:17.09
and so if I click on here
94
00:05:17.09 --> 00:05:20.08
and I go down
95
00:05:20.08 --> 00:05:26.05
and if I make a marquee around this area
96
00:05:26.05 --> 00:05:30.09
and then I go to the Line Tool
97
00:05:30.09 --> 00:05:34.08
and I just push Command A.
98
00:05:34.08 --> 00:05:38.00
So looks like it might be a polyline tool.
99
00:05:38.00 --> 00:05:41.08
So there's the line elements
100
00:05:41.08 --> 00:05:47.01
and I am going to go over here
101
00:05:47.01 --> 00:05:53.02
and I'm going to say the 2D full is that selection
102
00:05:53.02 --> 00:05:59.09
and then I'm going to select all the objects,
103
00:05:59.09 --> 00:06:02.04
the three dimensional pieces
104
00:06:02.04 --> 00:06:06.05
and I'm going to assign that to 3D full
105
00:06:06.05 --> 00:06:11.01
and I am not going to adjust the properties
106
00:06:11.01 --> 00:06:12.01
but if I needed to
107
00:06:12.01 --> 00:06:14.09
I can import properties
108
00:06:14.09 --> 00:06:17.02
and then there's another option here,
109
00:06:17.02 --> 00:06:20.03
what property listings do you want
110
00:06:20.03 --> 00:06:24.00
so you could use the National BIM Standard
111
00:06:24.00 --> 00:06:28.00
or you could use the ARCHICAD Listing Parameters
112
00:06:28.00 --> 00:06:29.09
and I'm going to go in Details
113
00:06:29.09 --> 00:06:33.00
and so I've already created
114
00:06:33.00 --> 00:06:35.06
a three dimensional representation of this
115
00:06:35.06 --> 00:06:37.03
so if I went into here
116
00:06:37.03 --> 00:06:39.06
and I want to adjust it,
117
00:06:39.06 --> 00:06:43.00
I'm just creating a three dimensional image
118
00:06:43.00 --> 00:06:45.00
from what I actually have
119
00:06:45.00 --> 00:06:47.09
and then I could adjust any of the information
120
00:06:47.09 --> 00:06:50.01
in here as necessary.
121
00:06:50.01 --> 00:06:51.09
So let's do one thing here
122
00:06:51.09 --> 00:06:55.05
and so now we go to Check and Save
123
00:06:55.05 --> 00:06:57.08
and I'm going to make it an object
124
00:06:57.08 --> 00:06:59.04
because it doesn't really fit into
125
00:06:59.04 --> 00:07:01.08
any of these other kind of parameters
126
00:07:01.08 --> 00:07:03.09
and then if I say Check,
127
00:07:03.09 --> 00:07:07.07
it's saying that it's missing origin
128
00:07:07.07 --> 00:07:10.02
for 2D and 3D
129
00:07:10.02 --> 00:07:12.04
and then it says some elements
130
00:07:12.04 --> 00:07:16.02
have no component type assigned.
131
00:07:16.02 --> 00:07:17.09
So I'm going to do something here.
132
00:07:17.09 --> 00:07:21.05
So one of the requirements for creating an object
133
00:07:21.05 --> 00:07:23.09
is to assign the origin
134
00:07:23.09 --> 00:07:25.04
which you can see here.
135
00:07:25.04 --> 00:07:32.05
So if I go down to my Level Dimension Tool
136
00:07:32.05 --> 00:07:36.05
and I'm going to just assign the origin here
137
00:07:36.05 --> 00:07:44.05
and then if I go back to the Define Library Part
138
00:07:44.05 --> 00:07:49.07
and I select everything that's signed
139
00:07:49.07 --> 00:07:54.06
and so let's, just a sec here
140
00:07:54.06 --> 00:07:59.03
and we'll do 3D
141
00:07:59.03 --> 00:08:03.03
and then if we go to the 2D Symbol,
142
00:08:03.03 --> 00:08:13.06
I'm going to actually put another origin
143
00:08:13.06 --> 00:08:18.06
and let's go back and check it.
144
00:08:18.06 --> 00:08:22.00
So right now it's giving me a yellow warning
145
00:08:22.00 --> 00:08:24.08
but I can still make the object.
146
00:08:24.08 --> 00:08:28.01
So here is kind of the parameters
147
00:08:28.01 --> 00:08:32.01
that are associated with the object itself
148
00:08:32.01 --> 00:08:34.09
and I can go to Save
149
00:08:34.09 --> 00:08:41.01
and then I can embed that into my projects library
150
00:08:41.01 --> 00:08:45.05
and now if I go over to my Object Tool,
151
00:08:45.05 --> 00:08:50.01
I've already got this library object
152
00:08:50.01 --> 00:08:53.01
embedded in the library of the project
153
00:08:53.01 --> 00:08:55.06
and I can look at it in 3D,
154
00:08:55.06 --> 00:08:57.03
I can look in an elevation
155
00:08:57.03 --> 00:08:59.04
and then I can place it.
156
00:08:59.04 --> 00:09:02.03
So I'm just going to place that object there
157
00:09:02.03 --> 00:09:05.09
and so there is the object that I created
158
00:09:05.09 --> 00:09:13.03
so I'm going to just look at this in 3D
159
00:09:13.03 --> 00:09:14.06
and so there we have it,
160
00:09:14.06 --> 00:09:19.00
we have this object that we've quickly created
161
00:09:19.00 --> 00:09:24.00
and we can manipulate the color
162
00:09:24.00 --> 00:09:27.01
and some of the other kind of properties of it
163
00:09:27.01 --> 00:09:31.06
but this is a great way to kind of quickly create objects
164
00:09:31.06 --> 00:09:34.03
that you're going to be using over and over,
165
00:09:34.03 --> 00:09:38.05
objects that might be custom or unique
166
00:09:38.05 --> 00:09:41.05
that you really want to represent accurately
167
00:09:41.05 --> 00:09:44.01
in your project
168
00:09:44.01 --> 00:09:47.06
and so that's the Library Part Maker,
169
00:09:47.06 --> 00:09:51.03
very unique tool with ArchiCAD
170
00:09:51.03 --> 00:09:53.07
that will help you generate information
171
00:09:53.07 --> 00:09:56.04
that will be useful in your project.
12913
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.