Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated: 1 00:00:01,120 --> 00:00:07,990 With the latest update of aircraft engine or one engine stopped working for some of wireless cards so 2 00:00:07,990 --> 00:00:11,010 it works for some cards but for others it will not work. 3 00:00:11,020 --> 00:00:16,540 It'll actually say that it enables monitor mode on land 0 1. 4 00:00:16,720 --> 00:00:20,390 So instead of just 1 0 it's going to start calling them down 0 1. 5 00:00:20,770 --> 00:00:26,050 And when you try to use this card sometimes it's not going to work in monitor mode even though your 6 00:00:26,050 --> 00:00:27,780 card supports monitor mode. 7 00:00:27,790 --> 00:00:33,880 So for now I actually with Kelly to on with the new update I recommend using a different method of enable 8 00:00:33,990 --> 00:00:35,740 enabling monitor mode. 9 00:00:35,740 --> 00:00:40,360 Now this method is actually the manual method of enable and monitor mode. 10 00:00:40,960 --> 00:00:45,040 So my wireless card is actually that is zero so let's just have a look on it. 11 00:00:45,040 --> 00:00:47,670 So it's really config lines zero. 12 00:00:47,680 --> 00:00:49,060 This is my wireless card. 13 00:00:49,260 --> 00:00:51,740 And as you can see now it's in no. 14 00:00:52,060 --> 00:00:55,670 So what I'm gonna do is I'm going to enable it using the manual method. 15 00:00:55,780 --> 00:01:01,020 So I'm going to do if config Lan's zero down same way that we did in the previous method. 16 00:01:01,030 --> 00:01:02,860 And now the card is disabled. 17 00:01:02,860 --> 00:01:06,870 Now the next command is the command that's going to enable monitor mode on the card. 18 00:01:07,000 --> 00:01:12,240 So it's just going to be either a config Landseer or the name of the card. 19 00:01:12,410 --> 00:01:15,700 And then again I am going to say mood monitor. 20 00:01:15,970 --> 00:01:16,870 So it's very simple. 21 00:01:16,880 --> 00:01:22,180 Either contact is the command line zeroes the name of my wireless card and I'm Telenet to enable monitor 22 00:01:22,180 --> 00:01:24,200 mode on this card. 23 00:01:24,280 --> 00:01:27,010 So I'm going to hit enter and that's done. 24 00:01:27,070 --> 00:01:31,500 Now if you don't see any error messages that means the commands are running successfully. 25 00:01:31,540 --> 00:01:38,240 So now I'm going to enable the card again so I'm going to do if config lines are up and that's going 26 00:01:38,240 --> 00:01:45,930 to bring my card up and if I do I really can't take lines 0 as you can see now the card is in weiter 27 00:01:45,940 --> 00:01:46,340 mode. 28 00:01:46,480 --> 00:01:52,800 So and the next videos I've actually used the old method of enabling white or most of used air Ehrmann 29 00:01:52,820 --> 00:01:56,940 ngi and I'll be using one zero as my card and monitor mode. 30 00:01:57,010 --> 00:02:02,350 But if you use this method then Lazarro is the one that's going to be in weiter mode. 31 00:02:02,350 --> 00:02:11,270 So I'm going to be around arrow don't Renji I'm going to use Lan's zero instead of zero because my entire 32 00:02:11,270 --> 00:02:13,500 mode is enabled on Lan's you know. 33 00:02:13,550 --> 00:02:20,200 So as you can see now the card works perfectly and weiter mode is enabled on its. 34 00:02:20,420 --> 00:02:26,430 Now you have the freedom of choosing any method you want but this method will work on all cards where 35 00:02:26,630 --> 00:02:29,090 the aircraft or they are one entry method. 36 00:02:29,090 --> 00:02:33,490 The method that seen in the previous video will only work on some cards. 3868