Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,780 --> 00:00:02,410
Notice in this example once again
2
00:00:05,130 --> 00:00:12,020
that BP to you God is enabled globally for Port Fost ports on the switch.
3
00:00:12,080 --> 00:00:17,150
We top the command spanning tree port Fost edge.
4
00:00:17,220 --> 00:00:19,140
BPT you can't default.
5
00:00:19,270 --> 00:00:23,130
So if a port forced port receives a BBB it will be shut down.
6
00:00:23,340 --> 00:00:26,920
So as an example show interface gigabit 0 1.
7
00:00:27,200 --> 00:00:28,670
This port is currently up
8
00:00:31,880 --> 00:00:35,740
it is not configured as a port Foss port.
9
00:00:36,200 --> 00:00:39,230
If that port was configured as a port Foss port
10
00:00:42,110 --> 00:00:49,370
and we receive it BP due on that port the port is shut down so soon as we talk to the command and it
11
00:00:49,370 --> 00:00:57,080
BP deal was received the port was disabled get rid of spending three port Foster shut the port down
12
00:00:57,710 --> 00:01:08,560
no shut the port the port will come up again show spanning tree the port is up but it's in the blocking
13
00:01:08,650 --> 00:01:20,680
state so it's been blocked by spending tree but the port is up up on switched to however we configured
14
00:01:20,740 --> 00:01:30,700
BP to you guard directly on the port the port is error disabled even though port Fost wasn't configured
15
00:01:31,360 --> 00:01:37,770
so soon as spanning tree BP you God is enabled on the port the port goes through disabled when a BP
16
00:01:37,770 --> 00:01:48,290
to use received I'll remove that command from the port shut it down and no shut it port comes up so
17
00:01:48,290 --> 00:01:58,510
do show interface gigabit 0 2 currently the port is up up as soon as I enable BP to you.
18
00:01:58,510 --> 00:02:05,840
God we should see that the port goes error disable and there you go.
19
00:02:05,900 --> 00:02:10,560
Port is ever disabled because the BP deal was received on the switch.
20
00:02:10,850 --> 00:02:16,490
So it's quite clear through the output to see that the port was shut down because of BP to you.
21
00:02:16,490 --> 00:02:26,060
God once again if I remove that the port doesn't come up again you have to shut to the port down and
22
00:02:26,060 --> 00:02:38,960
then no shut it to re enable the port so show interface gigabit 0 2 port is currently up up shows spanning
23
00:02:38,960 --> 00:02:47,680
tree port is in the blocking state because it's a backup port in this network.
24
00:02:47,680 --> 00:02:53,770
So once again if you enable port fast on your switches ensure that you enabled BP to you.
25
00:02:53,770 --> 00:02:56,110
God is an extra protection mechanism.
2793
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.